• 대학교육
• /
• 통권64호
• /
• pp.60-66
• /
• 1993

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.3-8
• /
• 2003

In this study, using linear and nonlinear deformation theories and by closed-form analysis and finite difference energy methods, respectively, various buckling load factors are obtained for stiffened laminated composite panel with trapezoidal type stiffeners and various longitudinal length to radius ratios, which are made from Carbon/Epoxy USN 125 prepreg and are simply-supported on four edges under uniaxial compression, and then for them, optimal design analyses are carried out by the nonlinear search optimizer, ADS.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.111-111
• /
• 1998

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.200-205
• /
• 2000

This study is object to thermal analysis comparison of continuous casting mold. A two-dimensional transient finite element model was developed to compute the temperature distribution for continuous casting mold. For thermal analysis using analysis result from ANSYS. In other to thermal analysis of continuous casting mold, many variables such as casting speed, cooling condition, film coefficient, convection and load condition are considered.

• 대학교육
• /
• 통권69호
• /
• pp.92-101
• /
• 1994

현대 사회에서 PR이란 많은 문제에 대처하는 효율적인 방안임에는 틀림없으나 모든 문제를 해결하는 만능의 도구는 결코 아니다. 그러므로 효율적인 PR의 활용방안은 곧 그것이 대처하는 문제의 정확한 인식에 근거하고 있으므로 대학의 책임자들이 자기 조직의 문제점을 정확하게 인식하고 인정하는 것이 바로 건전한 대학 PR 활용의 출발점이 된다. "오늘날 많은 조직들이 어려움을 겪고 있는 이유는 그들이 문제를 해결할 수 없기 때문이 아니라 그들이 문제를 보려(인정)하지 않기 때문이다."라고 말한 가드너의 지적은 오늘날 대학사회에서도 그대로 적용된다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.294-297
• /
• 2003

In this paper we designed and measured HTS antenna array for Direct Broadcast Satellite (DBS) system. HTS antennas fabricated in this work were a four-element, 11.67 ㎓z, high-Tc superconducting (HTS) microstrip antenna array with corporate feed network and circular polarization for direct broadcas- ting satellite (DBS) system. Our antennas was designed and built on a 0.5 mm thick YBa2Cu3O7-x (YBCO) /MgO substrate. The measurement results showed good axial ratio, wide bandwidth a remarkable improvement over their metal counterpart.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.69-74
• /
• 2002

This study is object to structural analysis of high pressure injection nozzle. The finite element model was developed to compute the stress, strain for high pressure injection nozzle. For structural analysis using result from FEM code. This structural analysis results, many variables such as internal pressure, boundary condition, constraint condition and load condition are considered.

• 한국공작기계학회논문집
• /
• 제12권5호
• /
• pp.88-93
• /
• 2003

Buckling behavior of stiffened laminated composite cylindrical panel was studied using linear and nonlinear deformation theory. Various buckling load factors are obtained for stiffened laminated composite cylindrical panels with rectangular type longitudinal stiffeners and various longitudinal length to radius ratio, which made from Carbon/Epoxy USN150 prepreg and are simply-supported on four edges under uniaxial compression. Buckling behavior design analyses are carried out by the nonlinear search optimizer, ADS.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.114-120
• /
• 2000

Burr is an unavoidable and undesirable by-product of most metal cutting or shearing operations. This burr must be removed to improve the fit of machined parts and safety of workers, to improve the effectiveness of finishing operations. Despite the full or partial automation of FMC or FMS, deburring operations to obtain workpiece with fine surface quality are difficult to be automated since the occurrence and condition of burr are not constant. This study focused on developing a software for deburring automation, which includes automatic recognition of parts, generation of deburring tool path and NC code, by analyzing the IGES format file which contains information of part geometry. The successful performance of developed software was demonstrated by computer simulation and deburring experiment using miniature end brush. And, this research can provide a basis for further advanced studies for automated deburring applications.

• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.159-163
• /
• 2003

본 논문에서는 복합적층 평패널의 최소중량화설계를 수행하기 위하여 길이방향 보강재로 보강된 평패널에 축압축 하중이 작용할 경우 좌굴하중을 구한다. 또한 좌굴에 대한 최소중량화설계를 유한차분에너지법을 이용한 선형좌굴이론과 비선형좌굴이론에 의해서 구하고 비선형 탐색 최적설계기법 ADS를 활용하여 해석한다. 복합적층 평패널의 종횡비는 1, 3, 7에 대하여 고려하였다.