• Title/Summary/Keyword: 윤활효과

Search Result 139, Processing Time 0.023 seconds

Numerical Simulation of a Two-Stage Hybrid Heat Pump (2단 압축 하이브리드 히트펌프의 특성 시뮬레이션)

  • Jeong, Si-Young;Yun, Han-Gu;Park, Ki-Woong;Park, Seong-Ryong;Kim, Min-Sung
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.34 no.2
    • /
    • pp.191-196
    • /
    • 2010
  • Hybrid heat pumps, which combine the vapor compression and absorption heat pump cycle, can efficiently produce hot water of $80^{\circ}-90^{\circ}C$ from the low temperature of ${\sim}50^{\circ}C$. In this study, the performance of a two-stage hybrid heat pump (HHP) was compared with a single-stage hybrid heat pump using EES (Engineering Equation Solver). For the same operating conditions, the two-stage HHP showed a slightly higher COP (Coefficient Of Performance) and more stable operating conditions than the single-stage HHP. Moreover, the maximum working fluid temperature of the two-stage HHP was found to be lower than that of the single-stage HHP by about 40 K, which makes the working conditions of the lubricating oil safer. The COPs of both systems decreased with increasing UA-values. However, the heat output of the HHP was increased at the same time.

Effect of Water Contamination of the Lubricant and Surface Roughness of Bearing Steel on the Rolling Contact Fatigue Life (윤활유의 수분혼입 및 베어링강의 표면 조도가 구름접촉 피로수명에 미치는 효과)

  • Heo, Tae Hyeon;Sim, Chung-Ki;Kim, Hong Seok;Shin, Ki-Hoon;Cheong, Seong Kyun
    • Journal of the Korean Society of Safety
    • /
    • v.32 no.1
    • /
    • pp.15-20
    • /
    • 2017
  • A large amount of research has been performed on the rolling contact fatigue(RCF) life of bearings, since it directly affects the safety and reliability of mechanical systems. It is well known that rolling contact fatigue life is influenced by several parameters including contact pressure, oil contamination by water or metal particles, and the surface conditions of bearings. However, the detailed damage mechanisms involved in rolling contact fatigue have not been clearly identified yet. In this paper the effects of water contamination of the lubricant and surface roughness of bearing steel on the rolling contact fatigue life were investigated. Two types of specimens with different surface roughness values were prepared through turning and lapping operations. They were tested under two different lubrication conditions, i.e. oil lubricant with 100% of oil and the water contaminated condition with 80% of oil and 20% of water using the rolling contact fatigue testing machine. The surface damage induced by the rolling contact fatigue was observed by using atomic force microscope(AFM). Experimental results show that the rolling contact fatigue life, $L_{10}$ was reduced by 24 to 33% depending on the lubrication condition. The reduction of fatigue life in the range of 53 to 57% was also observed at different surface roughness conditions.

Electrodeposition of Nano TiO2 Powder Dispersed Nickel Composite Coating (전기도금법을 이용한 나노 산화티타늄 니켈 복합도금에 관한 연구)

  • Park, So-Yeon;Lee, Jae-Ho
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.19 no.4
    • /
    • pp.65-69
    • /
    • 2012
  • Composite coating can be manufactured during the electroplating with the bath containing a suspension of particles: ceramic, polymer, nanopowders. Improvement of hardness, wear resistance, corrosion resistance and lubrication properties are well-known advantage of composite coating. In this study, nano $TiO_2$ powder dispersed Ni composite plating was investigated. The improvement of surface hardness and photo decomposition effects can be expected in this coating. Zeta potential was measured with pH. The effect of ultrasonication time and types of ultrasonicator were studied to minimize the agglomeration of $TiO_2$ nanopowders in the electrolyte. Optimum conditions for nano $TiO_2$ dispersed Ni composite coating were $40mA/cm^2$ of current density, pH 3.5, and $50^{\circ}C$. At these conditions, $TiO_2$ nanoparticles contents in the Ni deposit was 15-20 at.%.

The Treatment Effect of Honghwa-ja Herbal Acupuncture on Inhibitory MIF Activation on Synovial Membrane by LPS-induced Arthritis (홍화자약침의 윤활관절막내에서의 MIF활성 억제를 통한 LPS 유발 관절염의 치료 효과)

  • Park, Won;Kim, Kyung-Ho;Lee, Chang-Hwan;Lee, Dong-Gun;Lee, Hyun-Jin;Hwang, Ji-Hye;Kim, Kap-Sung
    • Journal of Acupuncture Research
    • /
    • v.24 no.4
    • /
    • pp.157-166
    • /
    • 2007
  • Objective : The aim of this study was to investigate anti-arthritic effects of Honghwa-ja herbal acupuncture extract through inhibitory MIF activation. Methods: After Rheumatoid arthritis(RA) knee joint was induced by lipopolysaccharide(LPS) in vivo, Honghwa-ja herbal acupuncture solution was applied on $ST_{35}$(犢鼻) and $EX-LE_{202}$(內膝眼) coresponding human body. To research the effect on the expression of MIF, COX-2, MMP-9 mRNA, RT-PCR was performed on LPS-stimulated Raw 264.7 cells. Results: In the Honghwa-ja herbal acupuncture solution treated Raw 264.7 cell, the mRNA expression of cytokines, RA related inflammation factors, such as the MIF, COX-2, and MMP-9 reduced concentration dependently. Positive reaction of RA-related cytokines MIF, $IL-6R-{\alpha}$, STAT3, COX-2, MMP-9 was reduced. Conclusion : Honghwa-ja herbal acupuncture extract has significant protecting ability against acute progressive RA by inhibiting the production of MIF, as a top in cytokines related to inflammation.

  • PDF

Quantitative Analysis of Fuel in Engine Oil (엔진오일 내 연료성분 정량분석)

  • Lim, Young-Kwan;Kim, Jiyeon;Na, Yong-Gyu;Kim, Jong-Ryeol
    • Applied Chemistry for Engineering
    • /
    • v.28 no.6
    • /
    • pp.714-719
    • /
    • 2017
  • The contaminated engine oil by fuel can intimidate driver safety due to vehicle problems such as engine abrasion, fire and sudden unintended acceleration. In this study, we investigate various functional properties of the engine oil contaminated with fuel. The test results indicated that the engine oil contaminated with fuel had relatively low values of the flash point, pour point, density, kinematic viscosity and cold cranking simulator. Furthermore, a four ball test suggested that the contaminated engine oil increased wear scar due to the poor lubricity. Moreover, SIMDIST (simulated distillation) using ASTM D2887 was applied to analyze fuel characteristics in an engine oil. The SIMDIST analysis result showed a lower carbon number, and the fuel was detected at an earlier retention time than that of using engine oil in chromatogram. Also, it is possible to quantitatively analyze for fuel contents in the engine oil. The SIMDIST method for the diagnosis of oil conditions can be used whether the fuel was involved or not, instead of analyzing other physical properties that require various analytical instruments, large volumes of oil samples, and long analysis time.

The Principle and Application of Bioremediation (생물학적 복구법(Bioremediation)의 원리와 응용)

  • 정재춘;박창희;이성택
    • Journal of Korea Soil Environment Society
    • /
    • v.1 no.2
    • /
    • pp.3-13
    • /
    • 1996
  • The efficiency of bioremedation can be measured by the enumeration of microorganism, respiration rate and decomposition rate. The side-effect can be measured by using Daphnia, oyster larvae and rainbow trout. Oxygen transfer could be a problem in the on-site treatment. For these, hydrogen peroxide can be used for solvents such as benzenes. Oleophilic nitrogen and phosphorus can be added for the treatment of oil pollution. Mixed microbial population or pure culture can be used for the inoculum. The pure culture used is Pseudomonas and Phanerochate. Sometimes enzymes are added and Photodegadation is coupled to increase the efficiency. For the treatment of oil pollution residue on soil such as waste lubrication oil and machine oil sludges, top soil of 15cm∼20cm depth is plowed and oil residue with approximately 5% concentration is applied. The optimum pH range is 7∼8, the ratio of phosphorus to hydrocarbon is 1:800. Appropriate drainage is necessary. For the treatment of marine oil pollution residue, addition of oleophilic fertilizer is effective. Air pollutiant such as oder can be treated by bioremediation. In this case, biofilters or biosrubbers are used for the reactor.

  • PDF

Electrorheological Properties of ER Fluid under High Shear Flow (고속 전단유동에서 ER유체의 전기유변 특성)

  • Kim Y. C.;Kim K. W.
    • Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
    • /
    • 2003.11a
    • /
    • pp.229-234
    • /
    • 2003
  • As electrorheological fluid(ER fluid) has a characteristic that apparent viscosity varies when electric field applied, so rheological characteristic(yield stress & viscosity) changes in proportion to the electric field applied and the response time is very short within a few miliseconds . In case of using ER fluid for journal bearing as lubricant, it is estimated that it's possible to realize very effective journal bearing system that is not complicate and has a very quick response time. It is necessary to examine the influence of rheological characteristic that varies with electric field applied on bearing characteristic to apply ER fluid to journal bearing, however there are few studies for about that. As for the journal bearing, it comes under high shear flow mode that has shear rate range of $10^3\~10^4s^{-1}$ because rotational speed is very high and clearance is small. But most of the studies for about ER fluid issued until now is about the range of $10\~10^2s^{-1}$. So, there are a lot of difficulties to understand the characteristic offish shear flow mode and furthermore it is restricted to make an experiment for about the characteristic of ER fluid because of the limitation of experimental equipment. The equipment was prepared to make an experiment lot high shear flow mode that has the range of $10^3\~10^4s^{-1}$ using ER fluid that is composed of silicon oil with dispersed particle of starch. Using the above system, the fluid characteristic of ER fluid was studied.

  • PDF

Study on the Clamping Force and the Friction Coefficient in a Bolt tightened up to the Plastic Range (소성역체결 볼트의 체결력과 마찰계수에 관한 연구)

  • 손승요;신근하
    • Computational Structural Engineering
    • /
    • v.7 no.3
    • /
    • pp.133-141
    • /
    • 1994
  • When a bolt is tightened up to the range of plastic deformation, yielding may be governed by the combined stresses due to the axial force developed in the bolt and the frictional torque induced on the thread by the contact with the nut. Consideration is taken account of the fact that the unengaged portion of the thread has least sectional area, being subject to initial yielding. Once yielding has taken place some strain hardening effect may result. Incremental stress-strain relations are used to treat the continued yielding, which is equivalent to treat continued yielding as if summing up the effects of thin walled cylinders subject to plastic deformation. M10 bolts of fine threads are used for both computational and experimental purposes. Variation of axial forces and frictional torques vs. the frictional coefficients are presented together with other plots showing some characterist of bolt under plastic deformation. Finally, a design and control aid for the tightening(i.e., kind of nomograph) is presented, showing the relationships among the torque factor and frictional coefficients for that particular bolt used in the experiment.

  • PDF

A Study on Material Development for and Application of a Slider of Pantograph (전동차 주습판(Pantograph Slider) 재질개선 및 실차 적용에 관한 연구)

  • Cho, Kyu-Hwa
    • Journal of the Korean Society for Railway
    • /
    • v.18 no.5
    • /
    • pp.410-418
    • /
    • 2015
  • A slider of the pantograph undergoes uneven and abnormal wear due to sliding contact with the catenary. In the case of rain, the loss of lubricant increases the frictional resistance for the reciprocating motion between the catenary and the slider, accelerating local wear. The slider in the winter should have good wear resistance, which can be achieved through alloy design. Uneven and abnormal wear were not observed in the results of a driving test using a wear resistant slider. It was found that the increased density of the slider enhanced the corrosive effects of Fe-Ti, preventing the occurrence of abnormal wear by maintaining the wear and arc resistance in the rainy season. Also, mechanical and electrical wear did not affect the composition of the slider, and this improved the wear resistance. Inaddition, the slider was applied to an entire train and was tested during driving; ananalysis of the correlation of the catenary was performed, including during the rainy season and the winter season.

Effect of an Improving Agent for the Intestinal Function, a Poly Herbal Formulation (KTG075) on Secretion of Mucus (장기능개선제(KTG075)의 대장관내 점액(Mucus)분비에 미치는 영향)

  • Baik, Soon-Ok;Lee, You-Hui;Kim, Hyun-Kyung
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.34 no.3
    • /
    • pp.356-360
    • /
    • 2005
  • The maintenance of intestinal health is complex and relies on a delicate balance between the diet, the normal microflora and mucosa, including the digestive epithelium and overlying mucus layer. The colorectal mucosa is protected by a visco-elastic mucus gel formed by high molecular mass glycoproteins referred to as mucins. Abnormality of mucin have been identified with colorectal disease. Constipation increases with age, and is more common among women than men in all age groups, e.g. 10% of men and 20% of women in the USA. The aim of the present study was conducted to investigate that the effects of formulation KTG075 from edible plants on intestinal function on mucus secretion, were examined by loperamide-induced constipation method using Sprague Dawley male rats. Epithelial cells of colonic crypt contained more mucus in the KTG075 group compared with those of the control group and the thickness of the mucus layer stained with alcian blue was significantly thicker in KTG075 treated rats compared with in control rats. Mucus production of epithelial cells of crypt and mucus contents at fecal and mucosa surfaces were reduced by loperamide-induced constipation. These results indicates that a poly herbal formulation KTG075 accelerates evacuation and activated intestines.