• Tribology and Lubricants
• /
• v.5 no.1
• /
• pp.3-6
• /
• 1989

Tribos라는 마찰을 뜻하는 그리스에를 어원으로 하는 tribology는 마찰의 과학이라고 직역이 되겠다. 이 트라이볼로지의 槪念을 潤滑 시스템에 導入함으로서 우리들은 문제지향적인 사고방식을 갖게 된다. 즉 지금까지의 潤滑技術者들은 一般的으로 윤골만에 한정된 대책 들을 생각하는 것이 通例이었으나, 이 트라이볼로지의 개념도입에 의해서 비리소 마찰과 마모의 차원에서 윤활문제를 다르게 되었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.108-110
• /
• 2008

다이아몬드마이크로블레이드의 윤활제첨가에 따른 절삭 성능과 수명향상을 위해 절삭에 따른 블레이드의 마모량을 측정시험을 행하였고 블레이드의 절삭성능을 평가할 수 있는 지표인 일정속도로 절삭 중 블레이드의 전력소모량을 측정하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1991.06a
• /
• pp.44-49
• /
• 1991

엔진유및 각종 윤활유의 이용범위의 광대 및 재료의 등장으로 사용조건이 더욱 과산화됨에 따라 한 종류의 첨가제를 단독으로 첨가사용하기 보다는 몇 종류 이상의 첨가제가 첨가되는 경우가 대부분이다. 첨가제의 기능상 여러종류의 첨가는 첨가제 자신이 갖고 있는 특성을 충분히 발휘하기 위한 것이지만, 일반적으로 첨가제간의 상호방해작용으로 단독첨가 사용시 각각의 특성을 충분히 발달하기보다는 기등이하의 결과를 가져오는 경우가 많다. 최근, 유용성 몰르브덴계 화합물이 마찰, 마모 및 \ulcorner화방지제로써 잘 알려져 있으며 몰리부덴계 첨가제중 Molybdenium dialkyl dithiocarbamate (MoDTC)는 다기능성 첨가제로서 우수성이 부고되었다. 그러나 특히 타 첨가제와 공존시 MoDTC의 마찰특성의 변화에 대해서는 거의 보고된 바가 없다. 본 연구는 MoDTC와 타 첨가제 간의 마찰특성의 상호작용에 관한 검토로서, 유황계 화합물($S_8$), 인계 화합물(인산에스테르;TBP), 치오인산계 화합물(ZnDTP)과 같은 윤활유에 많이 첨가되고 있는 극압제를 사용해 이들 화합물이 공존시 MoDTC 마찰감소 작용에 미치는 영향을 검토하고 또한 분위기의 영향에 관해서도 검토하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.17-18
• /
• 2014

최근 자동차 성능 및 연비향상을 위해서 엔진의 고출력화 및 소형화 경향이 뚜렷해지고 있으며, 이로 인해 엔진내부의 부품이 받는 환경은 더욱 가혹해 지고 있다. 즉, 자동차 엔진 구동부품은 금속간의 접촉가능성이 매우 높은 경계윤활조건에 놓이게 되며, 또한 배기가스 규제로 인한 첨가제를 최소화 하려는 경향에 따라 경계윤활 환경에서 더욱 심한 마모문제에 직면할 것으로 예상되어 내구성 및 내마모성이 높은 코팅기술에 대한 요구가 더욱 증가하고 있다. 본 연구에서는 Zr기지의 비정질 형성능을 갖는 합금계를 이용하여 아르곤 및 질소분위기에서 스퍼터링 함으로써 고경도의 ZrN상과 엔진오일과 반응하여 저마찰 트라이보 필름을 형성시킬 수 있는 금소계 원소가 Tissue phase로 존재하는 질화물 나노박막합성기술을 개발한 후 자동차 구동부품인 벨브트레인계 및 피스톤링/라이너 부품에 적용하여 마찰특성을 평가하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.298-298
• /
• 2014

표면 텍스처링 기술은 서로 접촉되는 표면 형태에 발생하는 마찰을 줄이는 기술이다. 이 기술은 자동차와 같은 기계장치에서 마찰을 줄여 보다 좋은 에너지 효율을 얻을 수 있어 효과가 기대되는 기술이다. 본 연구는 고체윤활제($CaF_2$ or $BaF_2$)와 alumina, zriconia를 이용하여 자기 윤활 세라믹 복합체를 만들고 그 위에 표면 텍스처링 후, 윤활 상태에서의 마찰특성을 알아보았다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.344-350
• /
• 2004

This is the study on dry sliding wear behavior of unidirectional carbon fiber reinforced epoxy matrix composite at ambient temperature. The wear rates and friction coefficients against the stainless steel counterpart specularly processed were experimentally determined and the resulting wear mechanisms were microscopically observed. Three principal sliding directions relative to the dominant fiber orientation in the composite wear selected. When sliding took place against smooth and hard counterpart, the highest were resistance and the lowest friction coefficient were observed in the antiparallel direction. When the velocity between the composite and the counterpart went up, the wear rate increased. The fiber destruction and cracking caused fiber bending on the contact surface, which was discovered to be dominant wear mechanism.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.337-343
• /
• 2004

This paper presents an experimental study of friction and wear properties of a unidirectional oriented continuous crbon-fiber reinforced epoxy composite at the ambient temperature. Friction and wear experiments were conducted in the three principal sliding direction of the fiber orientation in the composite were selected against the stainless steel counterpart specularly processed were using a pin -on-disc apparatus. Friction coefficient and specific wear rate at various normal loads and sliding velocities wear determined. When sliding took place against smooth and hard counterpart, the hightest were resistance and the lowest friction coefficient were observed in the anti-parallel direction. The wear track of the worn specimens was examined with a scanning electron microscope(SEM) to observe the damaged fibers on the surface. In addition, SEM observations of the worn surfaces allowed to identify the involved different wear mechanisms.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.2
• /
• pp.57-62
• /
• 2007

The lubricational characteristics about friction wear has an effect on the material quality of surface. In this paper, we studied the lubricational characteristics through the surface modification experiment by spray coating the surface with $MoS_{2}$ and PTFE solid lubricants. In the case of $MoS_{2}$ and PTFE coating, the friction coefficient of Journal is lower than that for noncoating so the friction characteristics is excellent. In particular, the beginning characteristics of $MoS_{2}$ coating is excellent, and in the case of PTFE coating, seizure dose not appear seizure. $MoS_{2}$ and PTFE coating are excellent in the extreme pressure at high load. The wear characteristics is excellent in the following order; PTFE < $MoS_{2}$ < Non Coating. For Non coating, seizure appears at the beginning due to the heat, but in the case of $MoS_{2}$ and PTFE coating, it will have the excellent heat stability even at high temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2308-2313
• /
• 2015

In order to produce an optimal performance solid lubricant used in the refractory slates, various compositions of starch, graphite and water were evaluated by testing their viscosity, coefficient of friction and wear performance. At 15% starch content, the degree of viscosity increment rose in proportional to graphite content and the lowest coefficient of friction was observed when the graphite content was at 30 wt%. Our results demonstrate that, as the water content decrease, the ratio of solid content increases, which compromises the surface coating resulting in increase of coefficient of friction. The best wear test result was obtained when the starch content was at 15 wt% with graphite content at either 25 wt% or 30 wt%.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.9
• /
• pp.799-804
• /
• 2014

Hard turning is a machining process for hardened materials with high surface quality so that grinding process can be eliminated. Therefore, the hard turning is capable of reducing machining time and improving productivity. In this study, hardened AISI4140 (high-carbon chromium steel) that has excellent yield strength, toughness and wear resistance was finish turned using CBN tools. Wear characteristics of CBN tool was analyzed in dry and MQL mixed with nano-particle (Nano-MQL). The dominant fracture mechanism of CBN tool is diffusion and dissolution wear on the rake surface resulting in thinner cutting edge. Abrasive wear by hard inclusion in AISI4140 was dominant on the flank surface. Nano-MQL reduced tool wear comparing with the dry machining but chip evacuation should be considered. A cryogenically treated tool showed promising result in tool wear.