• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.36-44
• /
• 2008

It is necessary to assess wood quality and strength of the clear specimens from used members in old wooden structures for the reuse of old members on the same structure or a new structure. Wood species classification by microscope observation of each wood member that was used in truss cord and temple, and several physical and strength tests by the specification of present KS standards were conducted to compare with some references. From the comparison of strengths with references, Korean larch gives relatively better wood quality and mechanical properties than other wood species. No significant deterioration of cell wall was found by microscopic observation for the sound wood part that was selected visually. Tensile specimens with 3 mm in thickness on the middle span showed greater strength than 5 mm thick specimens, which explains that dimension of tensile specimen should be examined for evaluating precise tensile strength properties. Other tests, compression, shear, and bending, are adoptable for each strength properties. Test methods for the evaluation of basic strengths and fastener connections for old wood species should be further examined.

• Journal of the Korean Institute of Gas
• /
• v.20 no.5
• /
• pp.40-49
• /
• 2016

When a leak occurs in the buried pipelines, The leak locations are able to detected by using the vibration sensors. These leak detection system, intended for incompressible fluid, such as water, are of using the wave propagation velocity and a signal arrival time delay between the sensors. In this paper, to develop a leak location detection system for a compressible fluid such as gas, the conventional detection methods have been studied, improved, and verified through the experiment using the compressed air. It confirmed that it is possible to detect the leak location for compressible fluid in the buried pipelines and to be applicable to the development of a leak location detection system in buried pipelines for gas.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.1
• /
• pp.39-47
• /
• 2014

In this study, the epipolar images were created by both methods of resolution adjustment and piecewise approach using RPC(Rational Polynomial coefficients) and ancillary data of IKONOS-2 and SPOT-5 satellite images whose resolutions are different from each other. The stereo geometry of these two satellite images was analyzed and the RPC block modelling was accomplished for generating epipolar images. In order to evaluate the accuracy of created epipolar images, the y-parallaxes were analyzed for the specific points which were apparently identified in mountainous, plain and urban area. Also the RMSEs of the specific points were calculated using the coordinates from the epipolar stereo images and the coordinates from the block triangulation. Y-parallaxes were within one pixel and the RMSEs were within two meters for X, Y and Z each.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.8
• /
• pp.89-96
• /
• 2017

This Paper proposes a vehicle detection system and a license plate recognition system from CCTV images installed on public roads. Since the environment of this system acquires the image in the general road environment, the stable condition applied to the existing vehicle entry / exit system is not given, and the input image is distorted and the resolution is irregular. At the same time, the viewing angle of the input image is more wide, so that the computation load is high and the recognition accuracy of the plate is likely to be lowered. In this paper, we propose an improved method to detect and recognize a license plate without a separate input control devices. The vehicle and license plate were detected based on the HOG feature descriptor, and the characters inside the license plate were recognized using the k-NN algorithm. Experimental environment was set up for the roads more than 45m away from the CCTV, Experiments were carried out on an entry vehicle capable of visually identifying license plate and Experimental results show good results of the proposed method.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.250-257
• /
• 2000

Paint, fiber and dye which play a critcal role in proving the relationship between a suspect and a victim or a crime scene, are one of the most frequently encountered trace evidences at a forensic laboratory, however, in usual, because of infinitesimally small sizes of forensic samples, investigation of the spectroscopic characteristics of such samples is becomming more and more prevalent in forensic science as a non-destructive method. In this study, transmittance/reflectance profiles at ultraviolet-visible region (240-780nm), were investigated by UV/visible microspectro- photometer and used to analyze the spectral characteristics of different types of 14 microfibers, 12 inks of four colors and 44 automotive paints of two colors. Good results for discrimination were given from spectra of these samples due to the characteristic bands in uv/vis region, respectively.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.6
• /
• pp.51-58
• /
• 2012

Scirtothrips Dorsalis (Thysanoptera: Thripidae) recently has been recognized as a major source of the pest damage in the citrus fruit orchards. So its arrival has been predicted periodically but it is difficult to identify adults of the pest with the naked eyes because of their size smaller than the 0.8mm. In this paper, we propose a method to detect candidate areas for automatic identification of Scirtothrips Dorsalis on forecasting traps. The proposed method uses a histogram-based template matching where the composite image synthesized with the gray-scale image and the gradient image is used. In our experiments, images are acquired by the optical microscopy with 50 magnifications. To show the usefulness of the proposed method, it is compared with the method we previously suggested. Also, the performances when the proposed method is applied to noise-reduced images and gradient images are examined. The experimental results show that the proposed method is approximately 14.42% better than our previous method, 41.63% higher than the case that the noise-reduced image is used, and 21.17% higher than the case that the gradient image is used.

• Korean journal of applied entomology
• /
• v.20 no.3 s.48
• /
• pp.146-150
• /
• 1981

Two rice cultivars infected by Gibberella fujikuroi, were tested to investigate the sequential change of disease development in the field conditions. In the preliminary test, the seeds of Nongbaek and an unknown cultivar showed 21 and $31.7\%$ infection by C. fuiikuroi. At the late stage of water nursery bed, some seedlings produced typical elongation symptom of bakanae disease and most of the leaves were dried up within a few days after transplanting. Out of the healthy looking seedlings, some plants also developed bakanae symptoms from middle June being two week after transplanting and the number was increased until middle September.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.527-534
• /
• 2019

Most of the prints left on the crime scene are latent prints. And, even after the latent prints have been developed, additional enhancement is required and forensic light sources are mainly used. Depending on the applied technique and the light source used, it is difficult to obtain the ideal enhancement effect when the reflected light cannot be cut off well. In this study, we improved the wavelength of the forensic light source by attaching a low-pass filter, resulting in better quality fingerprint images.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.425-432
• /
• 2003

The joint treatment of concrete is one of the technical problems in concrete constructions. Joints created with concrete constructions result in serious weakness in the aspects of both structural and water-barrier function. The radar and the infrared thermography method have been used for the non-destructive inspection of several construction joints of concrete structures in this study. The advantages and limitations of these methods are investigated for non-destructive inspection on construction joints of concrete columns. It can be shown that the detecting precision of construction joints using these methods is improved if radar analysis is carried out with a simulation analysis. In case of the infrared thermography method, the shape of construction joints can be also detected when heating is performed before testing. As the result, it has been verified that the construction joints, difficult to be detected by visual inspection, could be inspected effectively in broad areas at short period of time when these two methods are applied.

• Korean journal of applied entomology
• /
• v.27 no.1
• /
• pp.21-27
• /
• 1988

A study was carried out to investigate the morphological characteristics and life histories of H. morosa and H. diomPhalia during the period from 1984 to 1986. The head capsule width and bOdy length of H. Morosa larvae were slightly greater than those of H. diomPhalia. Otherwise, the two species looked very similar and were hard to be differentiated from each other in all life stages. H. morosa adults emerged in late June and laid eggs in soil during the period between mid July and mid August. Larvae developed by September to the last(3rd) instar which overwintered to pupate in late May. H. diomPhalia adults emerged from mid August but remained under the soil until next spring after which females laid eggs in soil from late May to early July. Larvae developed in most cases to the last instar by September and overwintered thereafter. Unlike H. morosa, they resumed feeding next April and began to pupate in late July. The egg periods of H. morosa and H. diomPhalia did not significantly differ but the larval and pupal periods of the latter were longer than those of the former.