• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.6-11
• /
• 2007

Packaged power station (PPS) is a stationary diesel engine generator set and developed for the supply of electric power to small villages, islands and factories etc. Therefore, the PPS is closely installed to residence area and sometimes cause the environmental noise problems. In this paper, environmental noise analysis was performed for the power plant with 28 sets of PPS. The initial analysis results showed the some difference between the measurement and analysis because of the inaccurate noise source data. To improve the accuracy of analysis, main noise sources were inversely estimated using the in-situ measurement data in the vicinity of PPS and steam boiler. As the results of re-analysis, the good agreement was obtained and it was concluded that the noise levels exceed the specified noise limit in residence area. In order to reduce the noise, the several methods such as geometry alteration of inlet duct, application of hybrid-type silencer and noise protection barrier were suggested and verified with the confirmed analysis model.

• Journal of Navigation and Port Research
• /
• v.42 no.3
• /
• pp.167-176
• /
• 2018

A solar power generation system on single point moored offshore plant has independent power system In order to satisfy the maritime environment and account for the number of sunless days, it is important to supply stable electric power to the systems. For these reasons, solar panels are installed in multiple directions. However, a partial shading effect occurs because the amount of light incident on each panel is different. The generated power by the solar generation system installed on land is affected by the latitude, then it is installed at an angle of 30 to $45^{\circ}$. in the case of Korea. In the case of a solar power generation system installed in a mooring type of marine plant, there is a possibility that the maximum power point is outside of the controllable range due to the partial shading effect. Therefore, a power generation loss occurs. By reducing the light amount difference between both panels, the maximum power point can exist in a range where the MPPT algorithm can track the power. The purpose is so the power generation efficiency can be further increased. In this paper, simulation results show that the highest power generation efficiency is obtained at an installation angle of $20^{\circ}$.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.123-124
• /
• 2019

우리나라 조선업은 건조분야에서 세계최고의 위상을 자랑하면서 급속도로 발전을 해왔다. 그러나 세계적으로 수주 불황과 조선 산업의 침체로 인해서 조선 산업은 직접적인 타격으로 국내의 중견 조선소 및 기자재 공급업체들이 도산되어0 최근부터 해양플랜트 사업이 우리나라 새로운 산업으로 부상하면서 해양 ICT 융합기술을 활용한 기자재 업체들이 많이 생겨났다. 하지만 실제 해양플랜트 선박 및 기자재의 국산화율은 현저히 낮다. 해양플랜트 외에 다른 용도로 사용이 가능한 Service and Access Basket의 국산화를 위해서 각 모듈별로 임베디드를 연계하여 설계하였다. 기존의 Service and Access Basket의 미비했던 안전 사양(기울기, 하중, 경보 등)을 추가로 설계하고 신뢰성이 높은 센서(자이로, 하중센서, 초음파 거리센서)들을 활용하여 통합 설계하였다. 이러한 통합 시스템이 완성이 되면 고소차, 해양/육상용 고공 작업을 할 수 있는 장비 등에 활용할 수 있을 예정이다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.1
• /
• pp.57-64
• /
• 1990

It is important in design of vertical pumps to consider arbitrary foundation excitation in addition to rotor vibration due to unbalance. In this study, a model of a vertical pump was developed for the analysis of its dynamic response. The vertical pump was modeled with lumped masses and springs which represent mult-cylinderical and rotor structure. A dynamic simulation program was developed and numerical calculation on the above mentioned problems were carried out.