• Title/Summary/Keyword: 유효유량계수

Search Result 40, Processing Time 0.031 seconds

Analysis of Effective Discharge for Hydraulic, Geomorphological Characteristics to Rivers with High Coefficients of River Regime (하상계수가 큰 하천의 수리적, 지형학적 특성에 따른 유효유량 분석)

  • Jang, Eun-Kyung;Kwon, Yong-Sung;Kim, Nam-Il;Ji, Un
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.409-413
    • /
    • 2011
  • 유효유량이란 수년에 걸쳐 연 유사량의 대부분을 이동시키는 유량으로 정의되며 유량-빈도분포곡선과 유사량 곡선을 이용하여 산정된다. 유효유량은 하도를 설계하거나 기존 하도의 안정성을 평가하는데 있어 기준유량이 될 수 있는 필수적인 요소이지만, 현재 국내의 경우 이에 대한 분석이 충분히 수행되지 않아 특정한 패턴을 도출하기 힘든 실정이다. 특히 우리나라의 하천은 연강수량의 약 70%가 여름철에 집중되는 기후적 특성의 영향으로 하상계수가 미국과 유럽에 비해 10에서 25배 크게 나타나 외국사례를 국내에 적용하는데 어려움이 있다. 따라서 본 연구에서는 구하도복원이 계획 또는 진행되어 유효유량 산정이 필수적이며 하상계수가 매우 큰 만경강, 청미천, 함평천을 대상하천으로 선정하여 유효 유량을 산정하고 수리적, 지형학적 특성과의 연관성을 분석하고자 한다. 유효유량을 계산하는 데 있어 가장 큰 영향을 미치는 요소는 유량빈도 간격 수와 유량빈도 간격의 설정이다. 따라서 본 연구에서는 유효유량 산정을 위한 유량 간격으로 산술등간격(Arithmeic Bin)과 로그간격(Logarithmic Bin)을 모두 사용하였으며 각각 간격수가 25개, 50개, 100개인 경우에 대해 유효유량을 계산하여 비교하였다. 산술등간격과 로그간격을 사용한 유효유량 산정결과 중 최대, 최소값을 제외한 나머지의 평균값을 각 대상하천의 유효유량으로 선정하였다. 수리적, 지형학적 특성에 따른 대상하천 분석 결과 하상계수가 클수록 유효유량이 크게 산정되는 것으로 나타났으며 하상 경사, 하상토의 중앙입경 크기와 비례하는 것으로 나타났다. 반면에 수심-하폭비와 사행도의 경우 유효유량과 반비례하는 것으로 나타났다.

  • PDF

Channel-forming Discharge Evaluation for Rivers with High Coefficients of River Regime (하상계수가 큰 하천의 하도형성유량 산정)

  • Ji, Un;Jang, Eun Kyung;Yeo, Woon Kwang
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.31 no.4B
    • /
    • pp.361-367
    • /
    • 2011
  • The channel-forming discharge, which is a standard and single flow for the river maintenance and restoration project, should be estimated necessarily in the stable channel design. It is difficult to produce the specific pattern for the channel-forming discharge in the domestic rivers due to the insufficient researches and case studies. Also, it is improper to adopt the foreign cases for the domestic rivers and streams which have the high coefficients of river regime. Therefore, the channel-forming discharge possible to use for rivers with high coefficients of river regime is suggested in this study through analyzing the bankfull, specified recurrence interval, and effective discharges of Mangyeong River, Cheongmi Stream, and Hampyeong Stream for the abandoned channel restoration project. The bankfull discharge was calculated with geometric data using the HEC-RAS modeling and the flow, bed materials, and sediment data for the study reaches were used to estimate the specified recurrence interval and effective discharges. As a result for calculating the channel-forming discharge, the effective discharge was greater than the bankfull discharge in the river with high coefficient of river regime and the effective discharge was greater than the bankfull and there was no correlation between the coefficient of river regime and the characteristics of the specified recurrence interval discharges.

Study of Butterfly Valve Loss Coefficient Equation (버터플라이밸브 손실계수 표현식에 관한 연구)

  • Park, Jong-Ho;Park, Han-Yung
    • The KSFM Journal of Fluid Machinery
    • /
    • v.14 no.4
    • /
    • pp.31-37
    • /
    • 2011
  • Linear curve or hyperbolic curve interpolation equations have been used to represent loss coefficient of butterfly valve according to a certain opening(for example, each 10 degree up to 90 degree) so far, and these equations are not precise and inconvenient to use with computer programming. Method of representing loss coefficient of butterfly valve using experiment data with several equations is presented and It is verified that log equation is most precise and convenient to use with computer programming in this research.

Study on Discharge Characteristics of Rectangular Type Labyrinth Weir (직사각형 래버린스 위어의 유량 특성에 관한 연구)

  • Im, Jang-Hyuk;Lee, Jin-Eun;Park, Young-Jin;Song, Jai-Woo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.1827-1831
    • /
    • 2009
  • 본 연구에서는 래버린스 형태 중 비교적 연구가 거의 되어 있지 않은 직사각형 래버린스 위어의 유량특성을 분석하여 월류량 증대효과를 분석하고자 하며 직사각형 래버린스 위어의 복잡한 흐름현상을 구현하기위해 수리모형실험을 수행하였다. 수리모형실험은 직사각형 래버린스 위어의 다양한 형상을 고려하기 위해 유효길이와 위어 폭 비(L/W)의 범위를 2, 4, 6, 8, 10으로 적용하였다. 또한, 수리모형실험에서 수심 변화에 대한 범위는 전수두와 위어 높이의 비를 0.05에서 0.75범위로 수행하였다. 직사각형 래버린스에 대한 유량 특성을 유량비와 유량계수 곡선을 이용하여 월류량 증대효과를 분석하였다. 그 결과, 직사각형 래버린스 위어의 유량비는 L/W가 증가할수록 감소하는 경향을 나타냈으며, 전수두 비$(H_t/P)$가 증가할수록 작아지는 경향을 나타냈다. 즉, 일반 선형 위어보다 월류량 증대하는 효과가 낮은 전수두 비에서 발생하는 것으로 분석되었으며, 월류량 증대를 위한 수공구조물 설계의 기초자료로 활용이 가능할 것이다. 향후, 유량계수를 예측하는 관련 식이나 기법을 개발하여 효과적으로 래버린스 위어의 유량을 산정할 수 있을 것이다.

  • PDF

A review on the mean velocity conversion coefficient of surface velocity (표면유속의 평균유속 산정을 위한 환산계수에 대한 고찰)

  • Lee, Sin Jae;Lee, Si Yoon;Park, Jun Su
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.272-272
    • /
    • 2018
  • 하천유량 측정방법 중 표면유속을 측정하는 방법은 수표면의 유속만을 측정하기 때문에 평균 유속을 산정하기 위해서는 평균유속 환산계수를 적용해야 한다. 일반적으로 표면유속을 평균유속으로 산정하기 위하여 이론 및 실험을 통해 제시된 환산계수는 0.84~0.95의 범위에서 현장 여건을 고려하여 적용하도록 되어 있다. 환산계수는 현장에서 수위별(또는 유량별) 직접 유속분포를 측정하여 산정해야 한다. 그러나 표면유속 측정이 주로 이루어지는 홍수사상에서는 유속이 빠르기 때문에 유속분포를 측정하고 분석하는 것이 어려우 국내에서는 0.85를 환산계수로 사용하고 있다. 본 연구에서는 2016~2017년 국토교통부 수문조사사업을 통해 8개 수위관측소에서 전자파표면유속계(MU2720)로 측정된 40개의 자료와 Price AA, ADCP, 부자 등을 이용하여 측정된 자료 기반으로 개발된 수위-유량관계곡선식을 이용하여 표면유속을 평균유속으로 산정하기 위한 환산계수(환산계수 = 수위-유량관계곡선의 유량 / 표면유속으로 산정한 유량)를 검토하였다. 또한 전자파표면유속계와 비교 유속계로 동시에 측정한 3개의 자료를 이용하여 환산계수를 직접 검토하였다. 여기서 표면유속 및 평균유속은 한 측선의 유속이 아닌 전체 단면에 대한 평균유속이다. 그 결과 표면유속을 평균유속으로 환산하기 위한 환산계수는 수위-유량관계곡선식을 이용한 경우 0.76~0.95(평균 0.85, 표준편차 0.04)로 산정되었다. 또한 비교 유속계와 동시에 측정한 3개 자료에 대해 환산계수를 산정한 결과 평균 0.85(0.82~0.91)로 산정되었다. 본 연구의 결과는 기존에 제시된 환산계수의 범위와 크게 다르지 않았으며, 일반적으로 환산계수로 사용되는 0.85의 값은 해당 지점의 유속분포 정보가 없을 때에는 유효할 것으로 판단된다.

  • PDF

Numerical Experiments on the Evaluation of Effective Permeability and Tunnel Excavation in the Three Dimensional Fracture Network Model (3차원 균열연결망 모델에서의 유효투수계수 평가 및 터널굴착 지하수 유동해석에 대한 수치실험)

  • 장근무
    • Tunnel and Underground Space
    • /
    • v.8 no.4
    • /
    • pp.275-286
    • /
    • 1998
  • The effective permeability and the representative element volume(REV) of fracture network model were evaluated based on the parameters such as permeability tensor, principal permeability and the direction of principal permeability. The effective permeability ranges between the harmonic mean and the arithmetic mean of the local permeabilities of subdivided blocks. From the numerical experiments, which were for investigating the influence of model volume on the variation of flux for the cubic models, it was found that the variation of flux became reduced as the model volume approached REV. The variation of groundwater flux into the tunnel in the fracture network model was mainly dependent on the ratio of the tunnel length to model size rather than REV. And it was found that groundwater flux into the tunnel was not completely consistent between the fracture network model and the equivalent porous media model, especially when the ratio of the tunnel length to model size is small.

  • PDF

A Study on the Measurement of Gas Discharge from the Gas Vent of Sanitary Landfill(1)- analysis for minimizing the measurement error of flow meter - (쓰레기 매립지 가스포집관에서 유출가스 계측에 관한 연구(1) -유량계 계측오차의 최소화를 위한 해석 -)

  • 이해승;이찬기
    • Journal of Korea Soil Environment Society
    • /
    • v.3 no.1
    • /
    • pp.83-92
    • /
    • 1998
  • This study presents a relationship between gas quantity and measurement resistance using the bubble meter, the water head indicator and the rotor meter from the gas vent sanitary landfill. From the one-dimensional analyses and experiments, the below results have been obtained. The gas volume sourcing from the gas vent depends on the permeability of final cover soil, its cover depth and distance between the gas vents. The total gas volume producing in the interested domain may be accurately measured by the bubble meter, the water head indicator and the rotor meter if the clay is used for the final cover soil. The required times approaching to the steady-state are different with respect to the flow meters, one day is for the bubble meter and the water head indicator and one hour for the rotor meter.

  • PDF

Structural Safety of Lightweight Valve Disc by Topology Optimization Design based on Computational Simulation (전산 시뮬레이션 기반의 위상최적설계에 의한 경량 밸브디스크의 구조적 안전성)

  • Kim, Taehyung
    • Journal of Energy Engineering
    • /
    • v.29 no.3
    • /
    • pp.25-33
    • /
    • 2020
  • In this study, flow and structural computational analysis were performed to investigate the structural safety of the lightweight butterfly valve disc designed by topology optimization. After flow analysis, as the opening angle increased, the flow coefficient increased non-linearly and showed a gentle slop. When the opening angle was 12 degree, the cavitation could be predicted. After FE analysis, all FE von-Misses stresses of the lightweight disc were smaller than the yield strength of the material, and all FE maximum deformations were also smaller than the conservative deformation of the previous study. Ultimately, it was confirmed that the structural safety of the lightweight valve disc based on computational analysis is effective.

Study of Flow Control Range according to Valve Type (밸브 형식별 유량제어범위 결정에 관한 연구)

  • Park, Jong-Ho;Park, Han-Yung
    • The KSFM Journal of Fluid Machinery
    • /
    • v.14 no.5
    • /
    • pp.39-47
    • /
    • 2011
  • Flow control range of valve, which is installed on pipeline, varies according to valve type, pipe diameter, pipe length, roughness, and elevation difference of both ends of pipeline. A lot of computation efforts and knowledge are needed to estimate flow control range of valve, considering above many parameters. The table of flow control range of each valve type is presented for convenience of pipeline design engineers who must make decision of valve size and type in this study. Also the reason that butterfly valve is recommended for flow control, and gate valve is forbidden is presented via quantification and figures in this study.

A Study on Estimation of Roughness Coefficient Using a Representative Grain Diameter (대표입경을 이용한 조도계수 산정에 관한 연구)

  • Jin, Jung-Woo;Lee, Do-Hun;Lee, Eun-Tae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.1731-1736
    • /
    • 2007
  • 본 연구에서는 체가름 시험을 통해 얻은 대표입경으로 조도계수를 산정하고 그 산정된 조도계수의 효용을 검정하고자 하였다. 체가름 분석을 통해 입도곡선을 작성하고 대표입경을 구함으로서 기 수립된 공식에 의한 조도계수를 산정하였다. 산정된 조도계수는 HEC-HMS의 하도추적 방법 중에 하나인 Muskingum-Cunge 8 point 방법과 HEC-RAS의 부정류 해석을 이용한 방법으로 얻은 조도계수를 비교하였다. HEC-HMS의 경우 대상유역인 오산천 유역에 대해 선행연구과정으로 저수지 방류량을 고려한 강우-유출 모형의 매개변수 추정에 관한 연구가 이뤄졌다(2006, 이아름). 선행연구에서는 계산된 유량과 실측 유량을 비교하여 Clark 단위도 방법의 매개변수를 추정하여 그 중 빈도가 큰 유출사상의 경우에 Sabol 식에 의한 모의 결과가 첨두유량의 재현성이 우수하게 나타남을 확인했다. 따라서 HEC-HMS 모형은 Clark 단위도 방법의 매개변수는 Sabol의 식에 의해 모형을 구성하고 2001년, 2002년, 2004년, 2005년의 사상에 대해 강우량, 기흥 저수지와 이동저수지의 실제 방류량을 이용해 유출량을 산정하였다. 이중 오산천 유역에 대해 선행연구에서 사용된 Muskingum의 하도추적 방법은 Muskingum-Cunge 8 point 방법으로 변경하여 대상유역에서의 조도계수를 산정하였다. HEC-RAS 모형의 부정류 해석은 2002년과 2005년의 사상으로서 상류단 경계조건으로 기흥 저수지의 방류량을 유량수문곡선으로 이용하였고, 하류단 경계조건으로는 회화수위관측소의 수위수문곡선을 이용했다. 대표입경을 이용해 얻은 조도계수를 HEC-HMS, HEC-RAS를 통해 검정한 결과 실측된 유량과 수위를 비교적 잘 재현해 내는 것으로 나타났으나, 조도계수의 보정을 통한 재현 유량과 수위를 비교했을 때, 대표입경을 통해 얻은 조도계수가 보정 조도계수보다 다소 작은 것으로 해석되었다.하고자 한다.해결책을 얻어내는 상호보완적인 결과를 추구한다. 그가 디자인하는 작품은 전형적인 이미지를 내포하지 않는다. 즉 그의 작품은 기존의 가치와 이념적인 것은 배제하고, 창의적인 개념을 도출하였다.형모서리는 건물 특화 성격이 강하므로 불가피할 경우 소형 액센트 광고 위치를 미리 벽면으로 할애하는 것이 경관 및 입면계획에 유리한 것으로 분석되었다. 불확실도 해석모형 등의 새로운 기능을 추가하여 제시하였다. 모든 입출력자료는 프로젝트 단위별로 운영되어 data의 관리가 손쉽도록 하였으며 결과를 DB에 저장하여 다른 모형에서도 적용할 수 있도록 하였다. 그리고 HyGIS-HMS 및 HyGIS-RAS 모형에서 강우-유출-하도 수리해석-범람해석 등이 일괄되게 하나의 시스템 내에서 구현될 수 있도록 하였다. 따라서 HyGIS와 통합된 수리, 수문모형은 국내 하천 및 유역에 적합한 시스템으로서 향후 HydroInformatics 구현을 염두에 둔 특화된 국내 수자원 분야 소프트웨어의 개발에 기본 토대를 제공할 것으로 판단된다.았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이를 보이지 않음을 알 수 있었다. 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는 효과를 발휘하는 것이 아닌가 해석된다. 이와 같은 연구결과를 통해 생다시마를 주원료로 개발된 생다시마차와 생다시마 음료가 만성 기능성 변비 증세를 개선하는 효능이 잠재적으로 있음을 확인하였다. 그러나 생약제재의 변비약 수준으로 변비 개선 효능을 증대하기 위해서는 재료 배합비의 개선이나 대장 운동기능을 향상시키는 유효성분의 보강 등이 필요하다는 점도 알 수 있었다.더불어

  • PDF