• Proceedings of the Korean Society of Grassland Science Conference
• /
• 1999.06a
• /
• pp.81.2-82
• /
• 1999

본 연구는 사일리지용 옥수수의 정확한 수확시기를 결정하기 위하여 생육일수(출사 후 일수), 유효적산은도(GDD), 유선(milk line) 및 건물률을 비교하였다. 출사 후 수확시기(황숙초기)까지의 일수는 35-42일이 소요되었으며 파종시기가 지연될수록 단축되었다. 한편 유효적산온도는 출사 후 일수와는 반대로 높았다. 옥수수의 사초 수량과 사료가치를 함께 고려한 적정 수확시기를 건물률은 30∼36%이었으며, 이 시기 내에서 농가의 사정에 따라 적정 수화시기를 결정하는 것이 좋을 것으로 여겨진다.(중략)

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.335-339
• /
• 2005

Enterobacteria, named ${\lambda}-bacteria$ isolated from fusiform fish bearing higher antioxidative capacity with ORP values, ${\lambda}-28$ strain bore higher anti-angiogenesis effect than other ${\lambda}-species$. Optimum growth condition of ${\lambda}-28$ bacterium was $25^{\circ}C$, neutral pH, Glc as a C-source, ammonium chloride as a N-source, and not effected with organic N-source.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.69-78
• /
• 1993

A testing system has been developed to evaluate the seasonal variation of the resilient modulus of granular subgrade soils. Two sites were successfully instrumented with soil moisture-temperature cells to monitor over a period of one year, the field temperature and moisture content underneath the pavement. Multiple regression equations were developed to determine the resilient modulus under environmental conditions. It is noted that the use of the effective resilient modulus at the location of the Average Depth of Significant Stress (ADSS) provides a reasonable basis for determining subgrade properties. In addition, a theoretical model has been developed to predict the resilient modulus due to the change of temperature and moisture condition.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2010

A regional climate model (RCM) can be a powerful tool to enhance spatial resolution of climate and weather information (IPCC, 2001). In this study we conducted dynamical downscaling using Weather Research and Forecasting Model (WRF) as a RCM in order to obtain high resolution regional agroclimate indices over the Korean Peninsula. For the purpose of obtaining detailed high resolution agroclimate indices, we first reproduced regional weather for the period of March to June, 2002-2008 with dynamic downscaling method under given lateral boundary conditions from NCEP/NCAR (National Centers for Environmental Prediction/National Center for Atmospheric Research) reanalysis data. Normally, numerical model results have shown biases against observational results due to the uncertainties in the modelis initial conditions, physical parameterizations and our physical understanding on nature. Hence in this study, by employing a statistical method, the systematic bias in the modelis results was estimated and corrected for better reproduction of climate on high resolution. As a result of the correction, the systematic bias of the model was properly corrected and the overall spatial patterns in the simulation were well reproduced, resulting in more fine-resolution climatic structures. Based on these results, the fine-resolution agro-climate indices were estimated and presented. Compared with the indices derived from observation, the simulated indices reproduced the major and detailed spatial distributions. Our research shows a possibility to simulate regional climate on high resolution and agro-climate indices by using a proper downscaling method with a dynamical weather forecast model and a statistical correction method to minimize the model bias.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.325-333
• /
• 2016

This paper proposes controller design algorithms for a ceramic soldering iron temperature control system, and reports their effectiveness in a control experiment. Because the responses of the ceramic soldering iron temperature to the control input are non-linear and very slow, precise modeling and controller design is difficult. In this study, the temperature characteristics of a ceramic soldering iron are represented by TSK fuzzy models consisting of TSK fuzzy rules. In the fuzzy rules, the premise variable is the control input and the consequences are the transfer functions. The transfer functions in the fuzzy model were obtained from the step input responses. As the responses of the ceramic soldering iron temperature are very slow, it is difficult to obtain the complete step input responses. This paper proposes a genetic algorithm to obtain the transfer functions from an incomplete step input responses, and showed its effectiveness in examples. This paper also reports a fuzzy controller design method from the TSK fuzzy model and examples. The proposed methods were applied to the temperature control experiments of ceramic iron. The TSK fuzzy model consisted of 7 TSK fuzzy rules, and the consequences were PI controllers. The experimental results of the proposed fuzzy PI controller were superior to the linear controller and were as good as in previous studies using a fuzzy PID controller.

• Korean Journal of Materials Research
• /
• v.8 no.6
• /
• pp.493-498
• /
• 1998

CdTe films were deposited by close spaced sublimation with various substrate temperatures, cell areas, and thicknesses of CdTe and ITO layers and their effects on the CdS/CdTe solar cells were investigated. The resistivity of CdTe layers employed in this study was 3$\times$ $10^{4}$$\Omega$cm For constant substrate temperature the optimum substrate ternperature for CdTe deposition was $600^{\circ}C$. To obtain larger grain size and more compact microstructure, CdTe film was initially deposited at 62$0^{\circ}C$, and then deposited at 54$0^{\circ}C$. The CdTe film was annealed at 62$0^{\circ}C$ and $600^{\circ}C$ sequentially to maintain the CdTe film quality. The photovoitaic cell efficiency improved by the "two-wave" process. For constant substrate temperature, the optimum thickness for CdTe was 5-6$\mu m$. Above 6$\mu m$ CdTe thickness, the bulk resistance of CdTe film degraded the cell performance. As the cell area increased the $V_{oc}$ remained almost constant, while $J_{sc}$ and FF strongly decreased because of the increase of lateral resistance of the ITO layer. The optimum thickness of the ITa layer in this study was 300~450nm. In this experiment we obtained the efficiency of 9.4% in the O.5cm' cells. The series resistance of the cell should be further reduced to increase the fill factor and improve the efficiency.

• Korean Journal of Weed Science
• /
• v.30 no.1
• /
• pp.50-57
• /
• 2010

This experiment was conducted to investigate seedling emergence of Humulus japonicus in Seoul and Suwon and to predict its seedling emergence in various locations in Korea. Non-linear regression analysis to fit Gompertz model to accumulated seedling emergence of H. japonicus was performed to describe its seedling emergence. Parameter estimates from the non-linear regression and estimated effective accumulated temperature required for its seedling emergence were further used to predict seedling emergence of H. japonicus in 8 major geographical regions of Korea. Seedling emergence of H. japonicus versus effective accumulated temperature was well described by Gompertz model in both Seoul and Suwon. Effective accumulated temperatures required for the first seedling emergence and 50% of the maximum seedling emergence were estimated to be $56.7^{\circ}C$ and $76.3^{\circ}C$, respectively. Therefore, the dates for the first seedling emergence of H. japonicus were predicted to be 21 and 30 March in Daegu and Daejeon, while 4 and 6 April in Suwon and Chuncheon, respectively. The dates reaching 50% of maximum seedling emergence were also predicted to be 25 March in Daegu, while 3, 8 and 9 April in Daejeon, Suwon and Chuncheon, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.2
• /
• pp.122-125
• /
• 1990

Pearl millet (Pennisetum americanum (L.) Leeke) has been detected as an excellent and new forage crop in Korea. Thus the objective of the study was to determine optimum planting season, growing degree days and productivity by shifting the planting season of pearl millet. Days to emergence of Australia pearl millet inbred line were shortened from 12 days to 3 days by delaying planting season from April 15 to July 15 in Suwon, 1986, but their growing degree days remained relatively constant 32.1$^{\circ}C$ in average. Days to heading also were shortened from 96 days to 54 days by shifting the planting season, but their growing degree days varied little being 697$^{\circ}C$ in average. For grain crop, economic planting season was from early May to late June, and their harvest index also did not varied much, but suddenly reduced in the July 15 planting plot. For forage crop, economic planting season was from mid-May to mid-June with optimum planting time of mid-May. Particularly, when planted in early July, 1987 and 1988, green fodder yields of Suwon 1 pearl millet hybrid were very low being 54 percent as compared with optimum planting season's yield 10.8t/10a.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.52-59
• /
• 2001

The fixation characteristics of CCA and CCFZ in Japanese red pine, Japanese larch, and ezo spruce sapwood were compared at various temperatures and fixation conditions (drying and nondrying fixation). Fixation was monitored by the rates of reduction of hexavalent chromium to trivalent one, and optimal fixation time was estimated based on the results. The rate of fixation was highly temperature dependent, and the fixation rate of treated wood conditioned under nondrying conditions was much more faster than that under drying conditions, especially when the moisture content of treated wood was below fiber saturation point. Preservative types affected fixation; CCA-Type B had the highest fixation rate, followed by CCA-Type C and then CCFZ. The differences in fixation rates of preservative components were also observed among wood species; Japanese red pine fixed the fastest, followed by Japanese larch and then ezo spruce. Time required to complete fixation according to the fixation temperature could be predicted successfully using the regression equations between the temperatures and fixation time, regardless of conditioning methods, preservative types, and wood species.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.149-149
• /
• 2011

아르곤 기체의 방사세기 또는 그 세기 비는 플라즈마 공정 진단에서 일반적으로 사용된다. 본 실험에서는 100 mTorr 압력 조건하의 유도결합 플라즈마(13.56 MHz)에서 E-H 모드 전이 영역, rf 바이어스(12.5 MHz) 전력 인가 및 N2 혼합 시 단순화한 충돌-방사 모델에 기초한 광방사 세기비 방법을 적용하여 플라즈마 변수를 진단하였다. 개발 프로그램 기반의 분광기를 사용하여 아르곤 기체의 특정 파장(750.4, 751.5 그리고 811.5 nm)들을 관측하였고, 동일한 조건하에서 정전 탐침법으을 이용하여 전자 에너지 분포함수의 변화도 측정 하였다. 맥스웰 전자 에너지 분포를 가정하는 일반적인 경우와 비교하여 볼 때 실제적인 전자 에너지 분포함수의 측정은 전자의 가열 메커니즘에 대한 상세한 정보를 제공함과 동시에 플라즈마 재흡수에 대한 보정을 가능하게 해준다. 광방사 세기비법에 의해 측정된 결과에 의하면, 750.4 nm/751.5 nm는 높은 에너지(>13.08 eV)의 전자들의 유효 전자온도에 대한 정보를 나타내는 반면 811.5 nm/750.4 nm는 아르곤 준안정 준위 밀도(1s5)에 대한 정보를 제공하게 된다. 수행된 실험 조건하에서, 측정된 준안정 준위 밀도는 E-H 모드 전이 영역에서 최대값을 나타내었고 바이어스 전압 및 N2 기체 혼합 비율이 증가함에 따라 감소하는 결과를 얻었다. 유효 전자온도의 경우 광방사 세기비법과 정전 탐침법 모두 같은 결과를 보여 주었는데, E-H 모드 전이 영역에서는 전자온도는 거의 일정하였고 바이어스 전압 및 N2 기체 혼합 비율이 증가함에 따라 전자온도는 증가하였다. 이러한 실험 결과는 방전 모드 전이, 바이어스 인가 그리고 혼합 기체 사용하는 공정 플라즈마를 이해하는데 있어 이들 변수의 진단이 중요한 요소임을 보여준다.