• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.1
• /
• pp.1-9
• /
• 2021

Trawl fishing is a fishing method in which a large, motorized trawler tows a bag-shaped net to catch fish living at the bottom or middle layers. For a trawl gear, it is of utmost importance to select the gear size and towing speed suitable for the effective horsepower (EHP) of the trawler in the design stage. In general, the power required to move an object is proportional to the product of the object speed and resistance; therefore, there are various choices for the gear resistance and towing speed given the effective horsepower of the trawler. However, there have been few studies on the gear design of an appropriate scale for the towing speed given the effective horsepower of the trawler. In this study, the resistance and shape of three types of midwater trawl gears were analyzed using SimuTrawl, a computer simulation tool. In addition, the relationship between the propulsion force and speed of the ship was clarified when the size and effective horsepower of the trawler were determined. Finally, we suggested the relationship between the towing speed and the resistance of the gear when the trawler towed the net was investigated, and a specific method of selecting the gear size according to the towing speed.

• Journal of Power System Engineering
• /
• v.16 no.6
• /
• pp.11-18
• /
• 2012

대형 상용 엔진에서 발생하는 유효 도시 마력의 약 4~15%는 마찰 손실을 통해서 사라지며 마찰 손실 중 약 40~55%는 엔진 실린더와 피스톤 사이의 마찰에 의하여 발생하여, 엔진 전체에서 발생하는 마찰 손실 중 가장 많은 부분을 차지하고 있다. 이 연구에서는 엔진 실린더 라이너의 온도 분포 개선을 통해 라이너를 따라 유막을 형성하고 있는 윤활유의 적정 점성을 유지시키는 방법을 제시하고자 한다. 피스톤-라이너에서 발생하는 마찰 특성은 피스톤의 행정 위치에 따라서 접촉 마찰과 유막에 의한 마찰로 구분되며 이에 따라 요구되는 윤활유의 점성 특성 또한 달라진다. 먼저 해석 모델을 통하여 실린더 라이너 내부 온도 분포 특성을 확인한 후 피스톤 마찰 특성을 고려한 적정 온도 분포를 고찰하며 실린더 라이너에 열저항 코팅을 통해서 이를 구현하였다. 또한 실린더-피스톤 간의 마찰/윤활 해석을 통하여 열저항 코팅의 마찰 개선효과를 확인하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.497-504
• /
• 2000

This paper presents a method for the equivalent-circuit parameters and torque characteristics calculation of squirrel-cage induction motors. The measurment of motor parameters were calculated by the stator resistance test, the blocked rotor test and no load test through T type equivalent-circuit method. Especially, this paper describes the test results obtained by using hall sensor and strain gage for the current and the torque characteristics of induction motors. 1(HP), three-phase squirrel cage induction motor has been used during the test and the parameters are compared with those obtained by the maker parameters of simulation results and experiment.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.21 no.3
• /
• pp.1-10
• /
• 1984

The computer programs of effective horsepower estimation of small fishing boat were developed, which was based on the statistical analysis of model test results. From the EHP estimation by these program and experimental model tests of practical fishing boats, the estimation accuracy was verified with maximum deviation of about 10 percent. Also, the EHP estimation accuracy was practically applied to initial design of four small fishing boats, and after the tank tests, the EHP reduction of the order of 15 to 25 percent was confirmed, as compared with existing ships. Moreover, a computer aided design procedure of fishing boat's hull form has been proposed in this study. The practical use of this procedure of fishing boat's hull form has been proposed in this study. The practical use of this procedure was demonstrated with the hull form design results of several fishing boats.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.1-11
• /
• 1991

A hull form for an Aframax tanker whore form parameters cover the values of $C_B{\simeq}0.8,\;L/B{\simeq}5.5\;and\;B/d{\simeq}3.5$ has been developed by applying a composite stern frameline concept and its excellent performance has been evaluated through a series of model tests at the Korea Research Institute of Ships and Ocean Engineering. The tests showed that this concept was very much promising in the cases of wide breadth and shallow draught vessels and suitably applicable to the stern frameline shape. For the comparison, a hull form developed by Japanese 'H' yard has been selected and the performances of two hull forms were evaluated by model tests and theoretical calculations. The comparison shows that Daewoo hull form requires less effective power by 10% and less delevered power by 5-6% at both full load and ballast conditions. In addition, it is suggested that Hushes method can give better correlationthan Froude method because the full scale resistance extrapolated by Froude method would be very much optimistic in case of the hull form with very low value of form factor.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.6
• /
• pp.597-603
• /
• 2012

It is necessary to accurately evaluate the resistance performance and estimate the towing power of a tugboat for safety towing operation at actual seas. In this study, we have carried out the model tests firstly to investigate the resistance performance and flow characteristics around the tugboat in still water. The experiments are performed in infinite depth in circulation tank using 1/33.75 scaled model from 5kts to 10kts(designed speed 7kts) considering the effect of adverse and favorable current. Then the numerical calculations are executed to analyze the response amplitude operator and added resistance on tugboat due to the waves. The results obtained by the present computation are compared with the those acquired from the experiments in still water. As a result, it is noted that the added resistance become larger at head sea and higher speed conditions. We can also observe that the EHP increase 70 percent in comparison with those in still water.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.316-322
• /
• 2017

The primary objective of the current study is to develop outstanding hull form on resistance performance by using numerical analysis code. Model tests were conducted to assess the resistance performance of the developed hull form. The investigation of an existing vessel was performed for validating the actual ship design based on the drawing. The operating displacement and speed were mainly confirmed through investigation of the existing vessel. The resistance performance of the existing vessel was analyzed using numerical code. The developed vessel was derived through studies on wave improvement of the bow shoulder, the balance of displacement distribution, the modification of the frame shape, and the size and shape change of the center skeg. Based on the results of a computational fluid dynamics analysis, the resistance performance of the developed vessel showed an improvement of 15% over the existing vessel at a speed of 11 knots. Resistance tests were conducted to evaluate the performance of the existing vessel and the developed vessel in the towing tank. Finally, the effective horsepower of the developed vessel showed an improvement of 17% over the existing vessel.

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.417-422
• /
• 2010

In this study, the resistance performances of barge are analyzed by model tests and computation using CFD to investigate the flow characteristics around a barge in still water. The model tests are carried out in infinite depth in Inha Technical College Circulation Tank to observe the resistance and the numerical simulations based on VOF(Volume of Fluid) method are performed to analyze the flow around the barge. We have selected two barge models to investigate the flow characteristics according to the different type of barges. The experiments are carried out with the models from 5kts to 10kts(designed speed 7kts) considering the effect of adverse and favorable current. The numerical simulations are performed to analyze the flow and resistance characteristics of barge in the full loaded condition with the target speed and compared with the experimental data to confirm the reliability of the numerical method. The result was that the difference of resistance with 25% occurred at low speed and EHP increased rapidly from 7kts.

• Journal of Korea Ship Safrty Technology Authority
• /
• no.7 s.25
• /
• pp.47-63
• /
• 2008

저항성능 측면에서 한국 어선선형의 특성을 파악하기 위하여, 본 연구에서는 한국과 일본에서 건조되어진 대표적인 어선을 한 척씩 선정하여 두 어선의 선형적 특성을 비교하였다. 또한 한국 어선의 선형적 특성들, 즉 일부 대표적인 선형요소들과 이를 제외한 기타의 국부적 선형특성들을 일본어선의 선형을 참고로 보정함으로써 우리나라 어선들의 저항성능을 향상시킬 수 있는 방안에 대하여 연구하였다. 한국어선과 일본어선은 해양환경과 어업의 종류가 다를 뿐만 아니라 관습적인 이유 등으로 선형의 차이가 있게 되며, 이것은 한국 어선이 일본 어선에 비하여 같은 배수량을 가지더라도 배 길이가 짧은 반면 폭이 넓으며 흘수가 얕은 대표적인 선형요소들의 차이로 확인할 수 있다. 이러한 차이를 고려하여, 일본어선들에 대한 유효마력 추정프로그램을 한국어선들에 맞게 보정.개발하는 과정을 통하여 양국 어선의 저항성능 차이를 확인할 수 있었으며, 보정된 프로그램을 이용하여 연구대상의 한국어선에 대한 저항저감효과를 줄 수 있는 선형요소들을 도출함으로써 선형요소들의 변화에 따른 저항성능 효과를 확인할 수 있었다. 그러나 선형요소들의 보정에도 불구하고 한국어선의 저항성능은 여전히 일본어선의 그것보다 떨어짐을 확인하여, 본 연구에서는 대표적인 선형요소들뿐만 아니라 국부적 선형특성 즉, 선수부에서 차인선(chine line) 경사도, 용골의 형상, 선미길이(용골 끝에서 선미단까지의 거리)를 각각 보정해 봄으로써 보다 더 큰 저항성능의 개선효과를 확인하였다. 본 연구결과는 앞으로 저항성능이 우수하면서도 실용 가능한 개량된 한국 어선선형의 개발에 기초적인 자료로서 활용이 가능할 것으로 사료된다.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.11-18
• /
• 1998

This study describes sea trial tests for a waterjet propulsion system attached in the hybrid super high speed cargo ship named "Narae". A measuring technique of jet velocity, gross thrust and impeller torque for the waterjet system is explained. From the measured data in sea trial test, performance of the waterjet propulsion system is analyzed and compared with model test results of a similar waterjet system which was carried out in 1996. The erective horse power estimated from sea trial tests shows a good agreement with resistance test results of the model ship. The optimum rising height is estimated as 0.75 m, and the overall efficiency of the waterjet system is predicted as 0.315 at 15 knots. Useful data such as the pump performance, the jet efficiency, the losses of inlet duct and nozzle were obtained. Test results show a similar behavior to the model test results.