| 1 |
R. Takata, Y. Li and V. Wong, 2006, "Effect of Liner Surface Texturing on Ring/Liner Friction in Large-Bore IC Engines," in Proceedings of ICEF06 ASME Internal Combustion Engine Division Fall Technical Conference, Sacrimento, CA
|
| 2 |
D. Richardson, 2000, "Review of Power Cylinder Friction for Diesel Engines," Journal of Engineering for Gas Turbines and Power-Transactions of the ASME, vol. 122, no. 4, pp. 506-519
DOI
ScienceOn
|
| 3 |
R. Takata, 2006, "Effects of Lubricant Viscosity and Surface Texturing on Ring-pack Performance in Internal Combustion Engines," MIT MS Thesis
|
| 4 |
G. Quian, T. Nakamura and C. Berndt, 1998, "The Effect of Thermal Gradient and Residual Stresses on Thermal Barrier Coating Fracture," Mechanics of Materials, vol. 27, pp. 91-110
DOI
ScienceOn
|
| 5 |
J. Heywood, 1998, "Internal Combustion Engine Fundamentals", McGraw-Hill, New York, pp. 906-910
|
| 6 |
F. Shabir, S. Authars, S.Ganesan, R. Karthik and S. Madhan, 2010, "Low Heat Rejection Engines - Review," SAE International Paper No. 2010-01-1510
|
| 7 |
J. Booker, 1965, "Dynamically Loaded journal Bearings: Mobility Method of Solution," ASME Journal of Basic Engineering, pp. 537-546
|
| 8 |
K. Hamai, T. Masuda, T. Goto and S. Kai, 1990, "Development of a Friction Model for High Performance Engines," Journal of the Society of Tribologists and Lubrication Engineers, vol. 47, no. 7 ,pp. 567-573
|
| 9 |
G. Livanos and N. Kyrtatos, 2006, "A Model of the Friction Losses in Diesel Engines," in SAE World Congress, Detroit, Michigan, SAE Paper No. 2006-01-0888
|
| 10 |
G. Livanos, 2011, "Development of a Simplified Instantaneous Friction Model of the Piston-Crank-Slider Mechanism of Internal Combustion Engines," SAE Paper No. 2011-01-0612
|
| 11 |
E. Ciulli, 1992, "A Review of Internal Combustion Engine Losses Part 1: Specific Studies on the Motion of Pistons, Valves, and Bearings," Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 206, no. 4, pp. 223-23
DOI
|
| 12 |
T. Tian, V. Wong and J. Heywood, 1996, "A Piston Ring Pack Film Thickness and Friction Model for Multigrade Oils and Rough Surfaces," in SAE International Fall Fuels & Lubricants Meeting & Exposition, SAE Paper No 962032, San Antonio, Texas
|
| 13 |
N. Patir and H. Cheng, 1979, "Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces," ASME Journal of Lubrication Technology
|
| 14 |
J. Greenwood and J. Tripp, 1971, "The Contact of Two Nominally Flat Surfaces," Proceeding of the Institute of Mechanical Engineering, vol. 185, pp. 625-633
|
webmaster
