• Journal of the Korea Concrete Institute
• /
• v.15 no.4
• /
• pp.513-521
• /
• 2003

Existing tests results have shown that confining the concrete compression region with closed stirrups improves the ductility and load-carrying capacity of beams. However, only few researchers have attempted to utilize the beneficial effects of the presence of these stirrups in design. This paper presents the result of experimental studies on the load-deflection behavior and the strengthening effect of laterally confined structural high-strength concrete beam members in which confinement stirrups have been introduced into the compression regions. Fifteen tests were conducted on full-scale beam specimens having concrete compressive strength of 41 MPa and 61 MPa. Different spacing of stirrups(0.25∼1.0d) and amount of tension steel($0.55{\sim}0.7{\rho}_b$) as major variables were investigated. And also, this study present an appropriate shear equation for decision of ultimate failure modes of high-strength concrete beams according to stirrup spacing. The equation is based on interaction between shear strength and displacement ductility. Prediction of failure mode from presented method and comparison with test results are also presenteded

• Journal of Life Science
• /
• v.18 no.10
• /
• pp.1325-1330
• /
• 2008

Salix koriyanagi is a deciduous shrub and native to Korea. The spatial distribution of multilocus allelic frequencies and geographical distances of the natural population in upper swampy area at the Namgang River in Korea were studied. The species showed a significant positive and negative spatial autocorrelation according to geographical distances as measured by Moran's I. Genetic similarity of individuals was found among subpopulations at up to a scale of a 12 m distance, and this was partly due to a combination of allelic frequencies, and therefore, a significant spatial autocorrelation was composed of a scale of 12 m intervals. Within S. koriyanagi in swampy area at the Namgang River, a strong spatial structure was observed for allozyme markers, indicating a migration within subpopulations.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.12
• /
• pp.3175-3184
• /
• 1997

To support large storage capacity and real-time characteristics of continuous media storage systems, we need to improve the performance of disk I/O subsystems. To improve the performance, we exploited buffer sharing scheme that reduces the number of disk I/Os. We utilized the advance knowledge of continuous media streams that is used to anticipate data demands, and so Promoting the sharing of blocks in buffers. In this paper, we proposed a buffer replacement algorithm that enables subsequent users requesting the same data to share buffer efficiently. The proposed algorithm manages buffers by utilizing reference interval information of blocks. In order to verify validity of the proposed algorithm, we accomplished simulation experiments and showed the results of performance improvements compared to traditional buffer replacement algorithms.

• Journal of Life Science
• /
• v.18 no.11
• /
• pp.1465-1470
• /
• 2008

Salix koriyanagi is a deciduous shrub and native to Korea. The spatial distribution of multilocus allelic frequencies and geographical distances of the natural population in upper swampy area at the Namgang River in Korea were studied. The species showed a significant positive and negative spatial autocorrelation according to geographical distances as measured by Moran's I. Genetic similarity of individuals was found among subpopulations at up to a scale of a 12 m distance, and this was partly due to a combination of allelic frequencies, and therefore, a significant spatial autocorrelation was composed of a scale of 12 m intervals. Within S. koriyanagi in swampy area at the Namgang River, a strong spatial structure was observed for allozyme markers, indicating a migration within subpopulations.

• Journal of Korean Association for Spatial Structures
• /
• v.6 no.4 s.22
• /
• pp.35-44
• /
• 2006

The form-resistant Systems like a dome and shell are used more widely than post-beam structure system in large space structure. Single layer latticed dome system, one of the form-resistant system, has great merits in manufacturing and constructing but the failure mechanism is not clarified yet. The purpose of this paper is to find out the buckling characteristics of single-layer latticed domes with square network by using the experimental method. Major test parameters are the stiffness of lattice member and space of square lattice. The specimens are applied uniform loading of snow type.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1098-1099
• /
• 2015

${\bullet}$ 시험대상: 영월태양광 4,990kW(998kW ${\times}$ 5호) ${\bullet}$ 13.07.31 연계기술검토의뢰 ${\bullet}$ 13.08.28 한전검토결과: 인근변전소 영월S/S(40MW) 초과로 10.8km 지점의 평창 D/L 평창간 347호 주진S/S에 다음의 보완대책과 연계 권고 ${\cdot}$ 문제점: 적정전압이탈 및 순시전압변동률 유지불가 ${\cdot}$ 연계기준만족을 위해 한전에서 제시한 보완대책 : 계통용량증설(설비보강), 연계용량 감소 및 전용선로 연계 ${\bullet}$ 14.01.09 분산형설치자의 용역사(에이스기술단)에서 송배전용전기설비 이용규정과 연계기준 만족을 위한 보완대책 제안 ${\cdot}$ 태양광발전시스템 인버터 자동전압(역률/무효전력) 조정기능 및 감시설비 구비 ${\cdot}$ 최적 공통연결점 선정: 분산형전원으로 부터 전기적으로 가장 가까운 영월D/L 영월S/S측에 개폐장치설치 하고 주진S/S 측으로 연계 ${\bullet}$ 14.01.29~06.19 한전(전력연구원)의 유효성 검토 ${\cdot}$ 보완대책 기술적 유효(실증시험 시행 후 시행공문 발송 예정) ${\bullet}$ 14.08.08 송배전용전기설비 이용규정 개정에 따른 협의 ${\cdot}$ 변압기 대당 20MW에서 25MW ${\cdot}$ 변전소 전체 60MW에서 75MW까지 허용 ${\cdot}$ 영월 S/S 측 문곡/영월 D/L 연계 공사 협의 ${\bullet}$ 14.10.04 사용전검사, 한전계통연계운전 시작 ${\bullet}$ 인버터 고정역률(99.9~100%) 운전 시험 ${\cdot}$ 14.11.21 22.9kV 계전기(SEL-751) 5대, 15분 간격 자료저장 ${\cdot}$ SEL-751/USB to RS232C/노트북 15분간격 측정(첨부) ${\bullet}$ 14.03.07 인버터 역률 95.0% 조정 15분간격 측정(첨부) ${\bullet}$ 변압기탭 선정과 인버터전압조정협조시험 계획 ${\cdot}$ 변압기탭을 현장에서 상하 1탭씩 변경 ${\cdot}$ 인버터역률을 인버터공급사에서 원격조정 ${\cdot}$ 22.9kV 보호계전기 SEL-751, 15분 간격 측정 ${\cdot}$ 인버터 370V 계전기 K-PAM DG3000/현장감시설비 연계 ${\cdot}$ 15분 간격 측정 저장 ${\cdot}$ 현장감시설비/인터넷 연결 원격측정(첨부예정)

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.86-92
• /
• 1999

A rigorous modal transmission-line theory (MTLT) based on effective dielectric method (EDM) is introduced and developed for the design of optical directional couplers with rib-type. This approach provides a rigorous numerical algorithm that takes all the possible guided components into consideration, and thus may serve as an appropriate reference to access the accuracy of such simplified methods as effective index method (EIM) and perturbation theory. Consequently, to search the optical parameters for maximum power coupling of the optical couplers, we evaluate the operating wavelength, the interval S between rib guides and the thickness t of a cladding layer.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.699-704
• /
• 2005

합리식(rational formula)은 일정한 강우강도를 갖는 호우로 인한 소유역의 첨두홍수량을 결정할 때 대표적으로 사용되고 있다. 기존의 합리식 틀 안에서 유역의 기하학적인 형상이 타원의 형태와 비슷하다면 유역의 형상을 고려한 수정된 합리식으로 첨두홍수량을 결정할 수 있다. 수정된 합리식에서는 강우가 전체 지속시간 동안 유역에 균등하게 분포한다는 기존의 합리식의 가정과는 달리 강우가 유효우량주상도의 각 시간간격에 균등하게 분포한다고 가정한다. 이러한 가정은 강우 지속시간이 도달시간 보다 작은 경우에도 합리식을 적용할 수 있음을 나타낸다. 따라서 본 연구에서는 유역의 기하학적인 형상이 타원형에 가까운 예곡천 유역에 합리식과 수정합리식을 적용 한 후 그 결과를 비교 분석하였다. 그 결과 수정합리식에의한 첨두유량이 합리식보다 상당히 적게 산정되었다. 이는 합리식이 식생이 발달한 투수유역에서 첨두유량을 과다 산정한다는 기존 연구결과와 일치하는 것이다. 따라서 수정합리식은 합리식 가정의 한계를 보완하면서 비교적 단순한 프로세스를 유지하고 있어 조건이 부합되는 소유역에서 유용할 것으로 판단되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2B
• /
• pp.151-157
• /
• 2004

In this paper, we investigated ultra high speed wireless communication cell backbone net of city using of wireless communication transceiver for millimeter wave band. A new type of 60GHz wave band wireless transceiver using NRD waveguide. This 60㎓ transceiver has excellent signal's absorption characteristics of oxygen molecule than the other millimeter wave bands. We constructed to wireless networks interval within 500m to 3km on wireless backbone node using 60GHz transceivers, and did it so that city type wireless communication cell backbone networks of 155.52MbpsATM(OC-3) may be possible. Therefore, if use transceiver, it is possible that city type ultra high speed wireless communication cell backbone networks construction of 100Mbps, 155.52Mbps, 622Mbps, 1Gbps, and 1.2Gbps degrees.

• Explosives and Blasting
• /
• v.17 no.4
• /
• pp.18-31
• /
• 1999

The explosive forming has been used for many year to expand tubes into tubesheets. this process has demonstrated ability to direct carefully the energy of an explosive to expand tubes into tubesheet holes without damaging the tubesheet and without causing the excessive cold work at the tube I.D. that is normally associated with mechanical expansion. The success of explosive tube expansion provided the background for the development of the explosive tube plug. The main results are as follows : (1) The optimum explosives and explosive qualities are PETN, RDX, HMS and about 18~31gr/ft of explosive plugging in nuclear steam generator. (2) Explosive plugging's thickness is 0.9~1.8mm. If groove of 0.4 mm formed in plug outside, For the hydraulic leakage is go up, explosive plugging of formed groove are applicate tube and tubrplate. (3) Sheath is designed on the polyethylene of low density, In thermal impact test of the $430^\circ{C}$, hydraulic leakage is $300kg/cm^2$. (4) About 10~60mm oxide inclusions are existed on the space of explosive plug and tube protect to the leakage.