• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.110-110
• /
• 2020

최근 낙동강유역에서는 여름철 폭염 및 가뭄의 영향으로 조류대경보가 발령되고 있으며, 급격한 수질환경적 변화가 이루어지고 있다. 본 연구대상유역인 낙동강에서도 가뭄으로 인해 녹조가 발생하여 조류경보가 발령되었다. 남조류의 대발생은 대량 번성 및 사멸에 따라 수체 내 산소 고갈 및 유기물 증가와 같은 문제를 야기하고 있다. 또한 남조류가 분비하는 독성물질 또한 수생태계와 인체에 유해하다. 그리고 인체에는 무해하다고 밝혀졌지만 수돗물 등에서 흙냄새와 같은 좋지 않은 냄새를 유발하는 냄새물인 지오스민, 2-MIB을 분비하여 정수공급체계의 악영향을 미친다. 본 연구대상 지점인 낙동강은 다기능 보 건설로 인해 하천 수심이 증가하고 유속이 느려지면서 정체성 수역 특성을 나타내고 있다. 이는 호소성 수역 특성을 나타내고 있음과 동시에 녹조발생과 같은 수질환경적 변화가 이루어지고 있다는 것을 의미한다. 본 연구에서 시각화 분석을 통해 낙동강 하류 남조류 발생현황을 분석하였으며, 랜덤포레스트를 이용하여 지점별 남조류 발생 주요 영향인자를 도출하였다. 조류경보제 발생 등급은 발령기준으로 관심, 위험, 대발생으로 구분된다. 학습데이터로 관심단계 기준인 남조류세포수 1,000 cell/mL 보다 작게 측정된 데이터들은 관심미만의 데이터로 Normal 등급으로 구분하였다. 구분된 발생등급을 범주형 변수로 설정하여 학습 데이터를 통해 모형을 구축하고 검증 데이터를 이용하여 모형 정확성을 평가하였다. 본 연구를 통해 조류발생 주요 영향인자를 도출하고 변수별 중요도를 평가를 통해 지점별 녹조 발생특성을 비교 분석하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.10
• /
• pp.756-766
• /
• 2011

In order to investigate the degree of apartment parking lot dust contamination, total 72 samples of parking lot dust (36 from ground parking lots and 36 from the underground parking lots) were collected in Daegu city from the end of March to the early June 2010. The dust samples were sieved below $100{\mu}m$, and analysed by ICP for 14 elements after an acid extraction. Results obtained from the source assessment of trace element using enrichment factor showed that Fe, K, Mg, Mn, Na and V were influenced by natural sources, while Cd, Cr, Cu, Ni, Pb and Zn were influenced by anthropogenic sources in both the ground parking lot and the underground parking lot. And results showed that Ca were influenced by natural sources in the ground parking lot, but influenced by anthropogenic sources in the underground parking lot. The measured values were remarkably higher in components from natural sources than in components from anthropogenic sources. Underground parking lot dust was more affected by anthropogenic sources and contaminated compared with the ground parking lot dust. Pollution index of heavy metals revealed that underground parking lot dust was 5.5 times more contaminated with heavy metal components than the ground parking lot dust. The results of correlation analysis among trace elements indicated that components in the ground parking lot were more correlated than those in the underground parking lot, and especially more correlated with natural sources-natural sources. Analysis for correlations between components and influencing factors in the underground parking lot showed that concentrations of heavy metals were higher with smaller number of parking spaces and no ventilation system, and older apartments in last paint and cleaning had relatively higher contents of heavy metals than those of recently painted and cleaned.

• The Journal of the Korea Contents Association
• /
• v.11 no.9
• /
• pp.26-44
• /
• 2011

The Study was carreid out to see whether the intensity of electromagnetic waves in each floor of a building where the sharing base station has been established is harmful to a human body, and to expect the intensity of the waves in the building. The investigate was performed on both of sharing base station either with many scatterers or without any of them. To satisfy the international standard and the domestic TTA standard, rms for each of the electromagnetic wave of every floor in the building with the station was measured from 3 location of 3 heights(1.1m,1.5m, and 1.7m). Max of the measured rsm from the each of the frequencies in the nine location was confirmed to be 48.12%(the rooftop measured value) at most, compared to the human body protection standard. The value was confirmed to satisfy the human body protection standard for each frequency. And the total value of the calculated exposure indexes for each frequency was determined to be more than 7 times lower at most, which was 0.1445, compared to the 1 standard. Since P value in both of 868MHz and 2.14GHz electromagnetic waves intensity for each base station and floor was less than 0.05, it was revealed to be meaningful, and since R-Sq(adj) value showed a value more than 50%, the regression equation was determined to fully absorb the data information. However, although the P value of both of 868MHz and 2.14GHz electromagnetic waves intensities under the integrating terms of the base station data and the floor data was showed to be less than 0,05, since R-Sq(adj) value of 868MHz electromagnetic waves intensity presented a value smaller than 50%(34.15%), it was determined that the 868MHz electromagnetic waves intensity is very much influenced by an environment with a base station. Because the electromagnetic waves intensity of 2.14GHz show R-Sq(adj) value bigger then 50%(51.8%), The regression equation model of 2.14GHz electromagnetic waves intensity was confirmed to be proper. It also turned out not to be effected by the surrounding environment near a building with the base station and the intensity of electromagnetic waves for each floor of such building was expectable by the regression equation.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.2
• /
• pp.108-117
• /
• 2021

BACKGROUND: Dichlobentiazox is a newly registered pesticide in Korea as a triazole fungicide and requires establishment of an official analysis method for the safety management. Therefore, the aim of this study was to determine the residual analysis method of dichlobentiazox for the five representative agricultural products. METHODS AND RESULTS: Three QuEChERS methods were applied to establish the extraction method, and the EN method was finally selected through the recovery test. In addition, various adsorbent agents were applied to establish the clean-up method. As a result, it was found that the recovery of the tested pesticide was reduced when using the d-SPE method with PSA and GCB, but C₁₈ showed an excellent recovery. Therefore this method was established as the final analysis method. For the analysis, LC-MS/MS was used with consideration of the selectivity and sensitivity of the target pesticide and was operated in MRM mode. The results of the recovery test using the established analysis method and inter laboratory validation showed a valid range of 70-120%, with standard deviation and coefficient of variation of less than 3.0% and 11.6%, respectively. CONCLUSION: Dichlobentiazox could be analyzed with a modified QuEChERS method, and the method determined would be widely available to ensure the safety of residual pesticides in Korea.

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.3
• /
• pp.203-207
• /
• 2015

The majority of food drying processes are based on the use of thermal energy. However, such methods may deteriorate the quality of the final product. Freeze-drying is one of the most useful processes for drying thermosensitive substances. Food that contains beneficial bacteria, for example, is susceptible to heat treatment, but during freeze-drying beneficial bacteria are preserved in these food items. The primary goals of this study were to develop yogurt snacks and to compare the viability of lactic acid bacteria (LAB) in yogurt snacks under different freeze-drying temperatures. In addition, the survival of LAB during storage was investigated. Survival of LAB in freeze-dried yogurt snacks gradually decreased over 16 weeks of storage. LAB had a residual viability of 25.5% after 16 weeks of storage at room temperature. LAB survived better in freeze-dried plain yogurt snacks than in freeze-dried strawberry yogurt snacks during storage. Freeze-dried yogurt snacks contained 11.9% fat, 57.1% carbohydrate, and 18.7% protein. In conclusion, the viability of LAB in freeze-dried yogurt snacks depends on the temperature during freeze-drying: the higher the freeze-drying temperature, the lower the viability of LAB in yogurt snacks. The viability of LAB in yogurt snacks was also dependent on the moisture content and nutritional value.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.510-518
• /
• 2014

Conflicts between humans and wild boars (Sus scrofa) have increased because of causing crop damage and appearing in downtown. Management to reduce population size has mostly been implemented on pests, but knowledges about ecological values are very rare. Rubbing trees by wild boar was investigated to figure out characteristics and for management ecologically from July to October 2013 in a mixed forest, Geochang, Gyeongnam Province, Korea. Pinus rigida was most frequently founded, and rubbing trees, both conifers and deciduous, were mainly located in 200~600 m above sea level. DBH was no significant difference between rubbing and control trees. The use intensity of conifers was higher than that of deciduous. The coverage of foliage layers and the number of woody plants within a radius of 2.5 m of trees (rubbing and control) were also investigated and compared to determine ecological characteristics. There were 1,332 individuals founded from 25 families. In the coverage of foliage layers, the understory and midstory showed statistically significant, but not in the subover and overstory. The number of Shrubs and saplings are higher in rubbing trees than those of control, but no difference in stems. Total individuals, the number of species, species diversity index(H') within a radius 2.5 m is considerably higher in rubbing trees with high intensity than those of low intensity and control. Our results show that wild boar mainly selected and used conifers more frequently as rubbing trees. Wild boar also modified the physical environments around rubbing trees. Consequently, the positive effects such as species diversity is increase. Thus the conservation policies is required after the intensive population reduction every 3-4 years for forest ecological management rather than annual sustainable hunting.

• Fire Science and Engineering
• /
• v.29 no.4
• /
• pp.49-56
• /
• 2015

Toxic gases from five types of interior building materials were investigated according to Naval Engineering Standard (NES) 713. The materials were plywood, indoor wall coverings (wood wall plate members and pine wood), reinforced Styrofoam insulation, laminate flooring, and PVC. Specimens were measured using an NES 713 toxicity test apparatus to analyze the hazardous substances in combustion gas from the materials. We used the US Department of Defense standard (MIL-DTL, Military Standard) to calculate the toxicity index of the combustion gas. Emissions of $CO_2$ from all specimens did not exceed the NES 713 limit of 100,000 ppm. The amount of CO gas emissions from reinforced Styrofoam insulation was 6,098 ppm. 25 ppm and 49 ppm of formaldehyde were released from the reinforced Styrofoam insulation and PVC flooring, respectively. These values were less than the limit of 400 ppm. The highest emissions were from $NO_X$ emitted by plywood and were above the limit of 250 ppm. The toxicity index of the specimens were calculated as 5.19 for plywood, 4.13 for PVC flooring, 2.35 for reinforced Styrofoam insulation, 2.34 for laminate flooring, and 1.22 for indoor wall coverings (pine wood). Our research helps us to understand the properties of these five interior materials by analyzing the combustion gas and explaining the toxicity of constituents and the toxicity index. Also, it would be useful for giving fundamentals to guide the safe use of interior materials for applications.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.4 s.44
• /
• pp.574-586
• /
• 1993

This study was to examine the actual conditions and contributing factors of absenteeism in manufacturing workers. Subjects were 1,184 workers employed in Taejon city and the observation period for absenteeism was 3 months (June to August), 1992. We obtained the following results. 1. Percentage of the absentees among the studied subjects were 21.1% in gross absence and 6.9% in sickness absence. Gross absence rate of subjects was 1.2% and sickness absence rate was 0.5%. 2. In the group of absentees, mean days of absence was 2.8 days and those of sickness was 4.4 days. Mean days of sickness absence due to injury was higher than that of illness, but the total days of sickness absence was high in extremity injuries, trunk injury, general fatigue, head injury, musculoskeletal problem in that order. 3. Variables contributing to the absence were job classification, education level, working hours per day, exposure of noxious factor, worker classification. 4. In the group of absentees, variables influencing the gross absence rate were working atmosphere, body mass infer, working environment, working hours per day but those of the sickness absence were working hours per day, education level and working atomosphere.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.60-61
• /
• 1996

염색폐수를 처리하기 위하여, 일반적으로 물리.화학적 공정과 호기성 생물학적 공정을 조합한 방법들을 사용하고 있다. 하지만 호기성 생물학적 공정은 난분해성 물질의 제거능력이 낮고, 염색폐수의 주된 오염원인 염료분자가 호기성 미생물에 대한 에너지원으로 적합하지 않아 분해되기 어려우며, 물리.화학적 공정을 이용한 처리방법으로도 높은 처리효율을 얻을 수가 없다. 이러한 문제점을 극복하기 위하여 염색폐수 처리에 혐기-호기공정을 이용하며, 혐기성 공정에서 생물학적으로 분해되기 어려운 고분자 물질들을 가수분해하여 생물학적으로 분해가능한 저분자물질로 전환시키고, 호기성 공정에서 저분자 물질을 효과적으로 처라할 수 있기때문에 기존의 염색폐수 처리공정에 비하여 훨씬 높은 처리효율을 얻을 수 있다. 특히, 혐기성 미생물은 호기성 미생물에 비하여 난분해성 물질에 대한 분해력이 높고, 생물독성 물질에 대한 내성이 강하기 때문에 수중생물에 유해한 염료를 함유한 염색폐수의 색도제거에 효과적인 것으로 기대된다. 또한, 막분리 공정은 유기물 및 미생물이 막표면에 축적, 증식함으로써 막세공에 막힘현상을 초래하여 역세척 등의 물리적인 방법이나 화학약품을 이용한 화학적 세척 방법으로도 투과플럭스의 회복이 불가능한 상태를 유발함으로 막의 수명을 단축시키는 원인이 된다. 따라서, 혐기-호기공정과 조합하면 색도성분 제거 및 막 오염의 원인이 되는 유기물 및 용존성 고형물을 제거하고, 막 오염의 억제를 통한 후 수염의 연장은 물론, 처리수의 수질향상에 활용될 수 있을 것으로 사료된다.1로 강구와 함께 공구강 vial에 장입 후, Spex mixer/mill을 이용하여 기계적 합금화 하였다. 기계적 합금화 공정으로 제조한 분말에 대한 X-선 회절분석과 시차 열분석으로 합금화 정도를 분석하였다. (Bi1-xSbx)2Te3 및 Bi2(Te1-ySey)3 합금분말을 10-5 torr의 진공중에서 300℃∼550℃의 온도로 30분간 가압소결하였다. 가압소결체의 파단면에서의 미세구조를 주사전자현미경으로 관찰하였으며, 상온에서 가압소결체의 열전특성을 측정하였다. (Bi1-xSbx)2Te3의 기계적 합금화에 요구되는 공정시간은 Sb2Te3 함량에 따라 증가하여 x=0.5 조성에서는 4 시간 45분, x=0.75 조성에서는 5 시간, x=1 조성에서는 6 시간 45분의 vibro 밀링이 요구되었다. n형 Bi2(Te1-ySey)3 합금분말의 제조에 요구되는 밀링시간 역시 Bi2Se3 함량 증가에 따라 증가하였으며 Bi2(Te0.95Se0.05)3 합금분말의 제조에는 2시간, Bi2(Te0.9Se0.1)3 및 Bi2(Te0.85Se0.15)3 합금분말의 형성에는 3시간의 bivro 밀링이 요구되었다. 기계적 합금화로 제조한 p형 (Bi0.2Sb0.8)2Te3 및 n형 Bi2(Te0.9Se0.1)3 가압 소결체는 각기 2.9x10-3/K 및 2.1x10-3/K 의 우수한 성능지수를 나타내었다.ering)가 필수적이다. 그러나 침전법에서 얻게 되는 분말은 매우 미세하여 colloid를 형성하게 되며, 이러한 colloid 상태의 미세한 침전입자가 filte

• Journal of the Korean earth science society
• /
• v.24 no.8
• /
• pp.657-667
• /
• 2003

Deep-drilled core sampling and high-resolution seismic survey were carried out to identify a Holocene-late Pleistocene boundary in Gyeonggi Bay, western coast of Korea. Analysis of core sections revealed the existence of an oxidized and semi-consolidated sediment layer, Iying immediately below a Holocene horizon (Unit I) and being developed at the top of a late Pleistocene deposit (Unit II). The oxidized sedimentary layer (uppermost part of Unit II) is characterized by semi-consolidated, yellowish sediments showing signs of desiccation and alteration such as high N value, low water content, periglacial cryogenic structure, depletion of smectite, and high geochemical weathering index (Ba/Sr ratio). This feature, together with radiocarbon ages, suggests that the layer has formed as a result of prolonged subaerial exposure of Unit II sediments during the late Wisconsin sea-level lowstand, producing a regional unconformity. Such unconformitic-bounding surface corresponds to a prominent near-surface reflector (R), which is observed in seismic profiles obtained across the drilled-core sections in the study area. Consequently, the buried oxidized-sedimentary layer associated with the seismic reflector possibly plays a key horizon for the understanding of late Quaternary environmental changes as well as evidence of the emergence of the Yellow Sea shelf during the late Wisconsin sea-level lowstand.