• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1741-1745
• /
• 2006

본 연구에서는 하천에 유입되는 오염물질 중 대부분을 차지하는 비보존성 오염물질의 확산거동을 예측하기 위해 2차원 수심평균된 이송분산방정식에 유한요소모형을 적용하였다. 수치모형 구성을 위해 Galerkin법을 이용한 가중잔차법을 사용하였으며, 복잡한 하천경계를 보다 정확히 재현할 수 있도록 삼각 및 사각요소망의 혼용이 가능하도록 하였다. 모의대상 수질인자는 BOD, DO, 질소화합물, 인화합물, 수온, pH 및 대장균군수이며, 이 가운데 BOD와 DO는 상호 쌍을 이루는 방정식을 풀어야 하는 특수한 형태이므로 별도로 취급하였다. 순간주입 및 연속주입에 의한 비보존성 오염물질의 확산거동을 모의하였으며, 시간에 따른 민감도를 분석하기 위해 보존성 오염물질의 확산거동과 비교하였다. 해석해를 이용해 순간주입된 오염물질의 오염운을 구하는 식을 유도하고 해석해와 본 연구에서 개발한 수치모형에 의한 수치해를 비교하였다.

• The Korean Journal of Applied Statistics
• /
• v.30 no.1
• /
• pp.57-68
• /
• 2017

Clustering algorithms attempt to find a partition of a finite set of objects in to a potentially predetermined number of nonempty subsets. Gibbs sampling of a normal mixture of linear mixed regressions with a Dirichlet prior distribution calculates posterior probabilities when the number of clusters was known. Our approach provides simultaneous partitioning and parameter estimation with the computation of classification probabilities. A Monte Carlo study of curve estimation results showed that the model was useful for function estimation. Examples are given to show how these models perform on real data.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.236-240
• /
• 2017

다양한 분야에서 복합재료의 중요성이 강조되면서 각각의 재료 특성에 따른 물성을 미시역학적으로 구하는 것에 대한 다양한 방법이 제시되고 있다. 본 논문에서는 5개의 혼합 법칙을 선정하여 전산구조해석을 통한 유한요소해석을 비교 검증한다. 그 과정에서 산출된 결과를 통하여 복합재료의 탄성거동의 오차가 1% 미만인 것을 확인하였고, 프로그램의 해석이 적절하다는 것을 검증하였다. 또한 프로그램과 가장 유사한 혼합 법칙이 무엇인지 확인하고, 체적 비에 따른 오차를 비교하여 가장 적합한 체적 비를 선정하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.89-96
• /
• 2007

Finite failure NHPP models presented in the literature exhibit either constant. monotonic increasing or monotonic decreasing failure occurrence rates per fault. Accurate predictions of software release times. and estimation of the reliability and availability of a software product require quality of a critical element of the software testing process : test coverage. This model called Enhanced non-homogeneous Poission process(ENHPP). In this paper, exponential coverage and S-type model was reviewed, proposes modified(the superosition and mixture) model, which make out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method. model selection based on SSE statistics for the sake of efficient model, was employed.

• The Korean Journal of Applied Statistics
• /
• v.32 no.2
• /
• pp.199-211
• /
• 2019

This paper is concerned with issues in the finite mixture of regression modeling as well as the simultaneous selection of the number of mixing components and relevant predictors. We propose a penalized likelihood method for both mixture components and regression coefficients that enable the simultaneous identification of significant variables and the determination of important mixture components in mixture of regression models. To avoid over-fitting and bias problems, we applied smoothly clipped absolute deviation (SCAD) penalties on the logarithm of component probabilities suggested by Huang et al. (Statistical Sinica, 27, 147-169, 2013) as well as several well-known penalty functions for coefficients in regression models. Simulation studies reveal that our method is satisfactory with well-known penalties such as SCAD, MCP, and adaptive lasso.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6B
• /
• pp.507-514
• /
• 2011

A numerical model has been developed by employing a finite element method to simulate the depth-averaged 2-D dispersion of the heat pollutant, which is an important pollutant material in natural streams. Among the finite element methods, the Streamline Upwind/Petrov Galerkin (SUPG) method was applied. Also both linear and quadratic elements can be applied so that irregular river boundaries can be easily represented. To show the movement of heat pollutants, the reaction term describing heat transfer was represented as an equation in which sink/source term is proportional to the difference between the equilibrium temperature and water surface temperature. The equation was expressed so that the water surface temperature changes according to the temperature transfer coefficient and the equilibrium temperature. For the calibration of the model developed, analytic and numerical results from a case of rectangular channel with full width continuous injection have been compared in a steady state. The comparisons showed that the numerical results were in good agreement with analytical solutions. The application site was selected from the downstream of Paldang dam to Jamsil submerged weir, and overall length of this site is about 22.5 km. The change of water temperature caused by the discharge from the Guri sewage treatment plant has been simulated, and results were similar to the observed data. Overall it is concluded that the developed model can represent the water temperature changes due to heat transport accurately. But the verification using observed data will further enhance the validity of the model.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.4
• /
• pp.667-680
• /
• 1995

튜브 내의 입구영역에서 난류 유동에 의한 대류와 비회복사(non-gray radiation)가 동시에 일어날 때의 열전달특성을 수치해석적으로 연구하였다. 작동유체는 이산화탄소, 수증기, 질소의 혼합가스라고 가정하였다. 지배방정식을 계산하기 위해 유한차분법이 이용되었고, 복사전달방정식을 이차편미분방정식으로 바꾸기 위해 P-1 근사법이 사용되었다. 그리고 혼합가스의 비회흡수계수(non-gray absorption coefficient)는 지수광폭밴드모형(exponential wide band model)을 이용해서 구하였다. 열전달특성에 대한 온도조건의 영향을 조사하기 위해 튜브의 축방향에 대한 평균 온도와 뉴셀트수(Nusselt number)의 변화를 몇 가지 다른 온도조건에 대해 나타내었다. 또한, 가스의 성분조성에 대한 영향을 조사하였으며, 이러한 결과에 기초해서 튜브 내에서 난류유동에 의한 대류와 비화복사가 동시에 일어날 때의 복사 뉴셀트수를 쉽게 예측할 수 있는 방법을 제시하였다.

• Water for future
• /
• v.29 no.4
• /
• pp.187-198
• /
• 1996

A numerical model for unsteady dispersion of horizontal line source in turbulent shear flow is developed. A fractional step finite difference method is used which splits the unsteady two-dimensional advective diffusion equation into the longitudinal advection and the vertical diffusion equations, and solves them alternately for half time intervals by the Holly-Preissmann scheme and the Crank-Nicholson scheme, respectively. The developed numerical model is verified using a semi-analytic solution for steady dispersion in turbulent shear flow. Dispersion of an instantaneous plane source in turbulent shear flow is analyzed using the model. The degree of mixing at the same dimensionless time is almost the same regardless of the friction factor, and the travel distance required to reach a certain degree of mixing is inversely proportional to the square root of the friction factor.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.184-197
• /
• 2008

This study was to investigate the influence of combining composite resins with different elastic modulus, and occlusal loading condition on the stress distribution of restored notch-shaped non-carious cervical lesion using 3D finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity was modeled and filled with hybrid, flowable resin or a combination of both. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. Results showed that combining method such that apex was restored by material with high elastic modulus and the occlusal and cervical cavosurface margin by small amount of material with low elastic modulus was the most profitable method in the view of tensile stress that was considered as the dominant factor jeopardizing the restoration durability and promoting the lesion progression.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.184-197
• /
• 2008

This study was to investigate the influence of combining composite resins with different elastic modulus, and occlusal loading condition on the stress distribution of restored notch-shaped non-carious cervical lesion using 3D finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity was modeled and filled with hybrid, flowable resin or a combination of both. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. Results showed that combining method such that apex was restored by material with high elastic modulus and the occlusal and cervical cavosurface margin by small amount of material with low elastic modulus was the most profitable method in the view of tensile stress that was considered as the dominant factor jeopardizing the restoration durability and promoting the lesion progression.