Pipelines have the highest capacity and are the safest and the least environmentally disruptive way for gas or oil transmission. Recently, failures due to corrosion defects have become of major concern in maintaining pipeline integrity. A number of solutions have been developed for the assessment of remaining strength of corroded pipelines. However, these solutions are known to be dependent on material properties and pipeline geometries. In this paper, a Fitness-For-Purpose type limit load solution for corroded gas pipelines made of the X65 steel is proposed. For this purpose, a series of burst tests with various types of corrosion defects are performed. Finite element simulations are carried out to derive an appropriate failure criterion. And then, further, extensive finite element analyses are performed to obtain the FFP type limit load solution for corroded X65 gas pipelines as a function of defect depth, length and pipeline geometry. And also, a window based computer program far the assessment of corrosion defect, which is named as COPAP(COrroded Pipeline Assessment Program) has been developed on the basis of proposed limit load solution.
The aim of this study was to analyze the slope stability relating to the failure of cut slopes and the characteristics of stress-strain relations obtained by limit equilibrium method, finite element method, and stereographic projection method for the reinforced cut slopes. The following conclusions were made : 1.To use stereographic projection method led to little possibility to take the toppling and wedge failure while to use the other methods led to the failure. It was recommended to reduce the slope inclination from 1:1 to 1: 1.5~1 :1.8 and adopt coir mesh method to protect the slope surface. position with the horizontal displacement after final excavation moved to the excavation base. The maximum shear strain values concentrated at the excavation base indicated the possibility to induce the local failure. 3. It was recommended that the slope inclination for blast rock with the slope height larger than l0m was 1: 0.5, 1:1, and 1: 1~1 :1.5 for hard rocks, soft and ordinary rocks, and ripping and soils, respectively. 4. Berm width criteria for blast rock with the slope height larger than l0m were recommended as follow : 2~3m per 20m slope height for hard rocks, 1 ~2m per l0m slope height for soft and ordinary rocks, 1 ~ l.5m per 5m slope height for ripping and soils.
본 논문에서는 골다공증성 척추압박골절에 대한 척추성형술시 골강화제인 PMMA 주입방법을 제안하였다. 척추성형술의 정량적 분석을 위해서는 유한요소해석을 사용하였으며 1m간격의 척추체 CT를 바탕으로 보다 정교한 척추체 모델을 제시함으로써, 단순화된 척추의 기하학적 형상과 간단한 재료 물성치를 사용하는 기존의 연구의 한계를 극복하고자 하였다. 본 연구 결과를 토대로 추체내 망상골에 주입되는 PMMA의 주입형태, 주입위치를 정량적으로 평가하여 이상적인 수술방법을 제시하였다. PMMA의 구입위치는 망상골의 앞쪽-위쪽에 많은 양이 집중하여 주입되었을 때, 가장 효율적으로 추체를 보완해 주는 것으로 나타났다.
본 연구에서는 고온 수열 콘크리트의 세공구조 변화를 평가하기 위하여 질소 흡착법을 이용한 분석을 실시하였다. 아울러 역학적 특성 및 염화물 이온 확산계수의 변화도 측정하였으며, 고온 수열 후의 내구성 변화가 RC조의 수명에 미치는 영향을 예측하기 위해 2차원 유한요소 모델을 구축하였다. W/C에 따라 각 시험체의 가열온도가 증가할수록 약 0.01${\mu}m$ 이하의 미세 공극량은 감소하고, 약 $0.01{\mu}m{\sim}0.1{\mu}m$크기의 세공공극은 증가하였다. 역학적 특성은 탈수가 발생하는 $200{\sim}600^{\circ}C$에서는 급격하게 감소하였으며 염화물이온 확산계수는 반대로 급격히 증가하는 경향을 나타내었다. 수치해석을 통하여 가열(화재)에 의하여 콘크리트 속 철근 위치가 발청 한계 농도에 도달하는데 소요되는 시간이 단축되는 것을 알 수 있었다.
A new forming technology has been developed to fabricate near-net shape components by using aluminum alloys with globular microstructure. The estimations of filling characteristic in the forging simulation with arbitrarily shaped dies of SSM are calculated by finite element method with proposed algorithm. The proposed model and various boundary conditions for arbitrarily shaped die are investigated with the coupling calculation between the liquid phase flow and the solid phase deformation. The simulation processes with arbitrarily shaped dies are performed on the isothermal conditions and axisymmetric problems. To analyze the forging process simulation with SSM, new stress-strain relationship for semi-solid behaviour is described, and forging the liquid flow. Furthermore, For the purpose of getting net shape of SSM, it is important to be obtain a solid fraction in forging process with arbitrarily shaped dies. To produce a automotive part which have good mechanical properties, the filling pattern in accordance with die velocity and solid fraction distribution has to be estimated for arbitrarily shaped die.
The flow accelerated corrosion (FAC) is one of significant aging and degradation mechanism and can affect structural integrity of CANDU feeder pipes. Pipe burst can occur under normal operation pressure (min. 10 MPa) if wall-thinning of the feeder pipe due to FAC is accumulated. Previous studies considered simple shapes of feeder pipe with local wall-thinning in order to conservatively assess structural integrity of wall-thinned feeder pipe. In this paper, a new FE model is developed, having an actual shape of the feeder pipe (double bent) as well as the actual wall-thinning shape and location based on the in-service inspection result. Then, the burst pressure assessment of the wall-thinned feeder pipe is performed using lower bound limit load analysis considering elastic-perfectly plastic material. In addition, an improved formulation to predict the burst pressure of the wall-thinned feeder pipe is presented and the safety margin is compared with an existing assessment method.
국내의 사회기반시설물인 교량이나 댐, 원전에 대한 내진 연구는 일찍부터 활발한 연구가 진행되어왔지만 화력발전소 구조물의 경우 사회적 중요성에 비해 지진에 대한 안전성 평가기술에 대한 연구가 미비한 실정이다. 이에 본 논문에서는 16개의 실제 발생한 지진파와 12개의 PGA에 대해 총 192회의 동적해석을 수행하였다. 그 결과 콘크리트의 압축강도와 연돌 구조물의 상대변위의 경우 적용한 지진파별로 PGA값이 증가함에 따라서 파괴확률이 증가하는 양상을 보여주었지만 지진파 별로 상이하였다. 이는 연돌의 고유치 해석 결과 주된 모드와 유사한 장주기 성분이 많은 지진파에서는 취약하기 때문인 것으로 분석되었다. 이를 바탕으로 취약도 곡선을 도출하여 우리나라 지역계수 0.22G를 기준으로 분석한 결과 콘크리트 압축이 한계상태에 도달한 비율은 25%이고 상대 변위가 한계상태에 도달한 비율은 13%이다. 따라서 지진이 발생했을 경우 상대 변위에 의해 붕괴될 확률보다 압축파괴에 의한 붕괴 확률이 높다. 이에 본 연구대상인 연돌에 대한 취약도 곡선은 지진이 발생했을 때 대상 구조물에 대한 한계상태를 판별하는 정량적 근거가 되고 화력발전 연돌 구조물의 지진에 대한 안전설계시 활용될 수 있다.
경상북도 안동시 임동면에 위치한 999번 지방도로 위리 지역에 고개 마루를 절취하여 도로 개설공사를 시행한 후, 강우량이 많을 때 산측이 침하하고 도로가 융기하는 등 사면이 불안정하게 활동하였다. 이 연구에서는 위리 지역의 변형 발생의 원인을 분석하고, 수치해석을 통하여 연구지역 사면의 안정성을 평가하였다. 연구지역은 백악기 셰일, 이암 및 사암으로 구성되어 있으며, 북북서 및 북북동 방향의 두 개의 단층이 분포하고 있다. 사면의 변형은 지하수위의 증가에 따른 단층 점토의 전단강도 감소, 간극수압의 증가, 단위중량의 증가 등으로 인하여 단층을 따라 사면이 이동하면서 발생하며, 위의 여러 요인 중에서 단층 점토의 전단강도 감소가 사면의 변형에 가장 큰 요인으로 밝혀졌다. 사면의 안정성 및 변형정도를 파악하기 위하여 사면에 8개의 단면을 설정한 후 한계평형법, 유한 요소법 및 유한 차분법을 이용하여 해석을 실시하였다. 해석 결과, 지하수위가 단층면 아래에 분포할 때 안전율은 1.7 이상이지만, 지하수위가 지표면까지 상승하면 안전율은 1.0 이하로 감소하고, 15~30cm의 변위가 발생하는 것으로 해석되어 위리 지역에 발생한 변형과 거의 유사한 결과를 보여준다. 안정화 공사가 끝난 현재에는 지하수위가 지표면에 도달하여도 각 단면의 안전율은 2.4 이상이고 2.8cm이하의 변위가 발생하여, 이 지역의 사면은 매우 안정한 것으로 판단된다.
절리가 발달한 암반의 거동평가를 위한 해석적 방법은 연속체 모델과 불연속체 모델을 사용하는 방법으로 대별할 수 있으며, 연속체 모델을 사용할 경우에는 유한요소법이나 유한차분법을 이용하는 방법이 주로 사용되고 있다. 불연속체 모델은 개별 블록들의 움직임을 일일이 계산하므로 매우 매력적인 방법이지만 현재의 지반조사 기술수준으로는 지반내의 발달된 절리를 개별적으로 정확히 파악하기가 매우 어려우며, 컴퓨터의 계산용량이 너무 과다해지는 단점이 있다. 더욱이 2조 이상의 주절리군을 갖는 절리암반의 경우, 개별 블록의 거동을 모델링하는 것은 불가능하다. 따라서, 불연속편을 포함한 암반을 연속체로 가정한 편재절리 모델(ubiquitous joint model)을 이용한 연구가 요구된다. 터널의 경우에는 사면의 경우와는 달리 파괴면의 형상을 사전에 가정하기 어렵기 때문에 한계평형법에 기초한 해석법등을 적용하여 안전율을 구하기가 곤란하다. 이러한 이유에서 터널을 대상으로 한 수치해석은 안전율을 구하기보다는 안정성을 평가하는 데만 제한적으로 사용되어 왔다. 본 논문에서는 2조의 절리군을 고려할 수 있는 편재절리모델을 이용하여 절리암반터널의 거동이 평가되었고, 수치해석에 의해 터널의 안전율을 구하는 방법이 제시되었다. 이를 위해, 강도감소기법이 사용되었다.
본 연구에서는 중심 축하중을 받는 H형강 기둥의 베이스플레이트의 지압응력의 분포와 설계에 대하여 조사하였다. 일반적으로 강구조 기둥의 베이스플레이트는 지압응력이 등분포하다고 가정하고 그 크기와 두께를 결정한다. 그러나 중심 축하중이 적으면 베이스플레이트의 크기도 작아지고 두께도 얇아지며 지압응력은 등분포하게 되지 않으며 기둥단면의 하부에 집중된다. 본 연구에서는 실험적 방법과 해석적 방법으로 지압응력의 분포에 대하여 조사하고 그 결과를 이용하여 설계법을 검토하였다. 7개의 H형강 기둥 베이스플레이트 시험체를 제작하여 실험을 수행하였다. 또한 유한요소해석프로그램인 ANSYS를 이용하여 베이스플레이트의 지압응력의 분포를 해석하였다. 연구결과 지압응력은 기둥단면의 하부에 집중되고 등분포하지 않아 강구조 한계상태 설계기준에서의 등분포한 지압응력의 가정은 적정치 않았다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.