• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.209-212
• /
• 2011

본 논문에서는 평판(plate) 형태를 갖는 부유식 해상구조물의 유탄성해석에 관한 연구를 수행하였다. 유체력 산정을 위해 포텐셜을 입사, 방사, 산란으로 구분하여 계산하였던 기존의 방법 대신 전체 포텐셜을 직접 계산하는 방법을 사용하여 최근의 경향을 반영하였다. 선형 유탄성해석의 특성을 고려하여 해석시간을 감소시키기 위해 일반적으로 사용되고 있는 주파수 영역에서의 해석 기법을 적용하였다. 구조체의 모델링에 소요되는 요소수를 줄이고, 휨 변형 시 전단변형률에 의한 잠김현상을 해소하기 위해 MITC 기법을 적용한 평판 유한요소를 사용하였으며, 3차원 Green 함수법을 적용해 유체력을 산정하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.4
• /
• pp.32-41
• /
• 2002

Present study aims to investigate draft effects on hydro-elastic response of pontoon type VLFS(Very Large Floating Structure). A three dimensional higher-order boundary element method(HOBEM: Hong et al;1999, Choi, Hong and Choi; 2001) is extended to analyze elastic response of structures. Intensive numerical calculations were carried out for box type structure to investigate the draft effect on hydrodynamic forces on pontoon type VLFS. Main attention was paid to wave run-up along the waterline for various cases of draft scantling. It is found that the draft effects on the hydro-elastic response of pontoon type VLFS are important especially in short wave range and shallow water region.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.903-910
• /
• 2015

The purpose of this research is to develop a full-spectral fatigue analysis program, based on rigid-body ship motion analysis, in order to perform a full-spectral fatigue analysis that considers hydroelasticity effects. To gain credibility, fatigue analysis results of two ship types, performed by the developed program, were compared with those of a classification society, and it was found that both are identical. Full-spectral fatigue analysis considering hydroelasticity effects would be developed in further studies by including flexible-body ship motion analysis results and by supplementing the developed program with a wide-band fatigue damage model.

• Computational Structural Engineering
• /
• v.22 no.5
• /
• pp.78-85
• /
• 2009

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.631-634
• /
• 2011

본 연구에서는 규칙 파랑 중에 있는 부유식 구조물의 유탄성 거동을 해석 하고, 수치모델의 수렴성을 살펴본다. 부유식 구조물은 보로 모델링 하며, 유체는 이상유체로 가정하여 문제를 해결한다. 보 모델의 경우 Euler-Bernoulli 보 모델과 Timoshenko 보 모델로 나누어 그 특성을 비교 해 본다. 문제의 해석법에 있어서 부유식 구조물의 경우는 유한요소법을, 유체의 경우는 경계요소법을 이용하여, 상호 연성된 방정식을 이끌어 낸다. 상호 연성된 방정식을 토대로 Euler-Bernoulli 보 모델과 Timoshenko 보 모델의 거동 특성을 살펴보고 제시된 수치 모델을 기준으로 수렴성을 분석해 본다.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.5
• /
• pp.53-59
• /
• 2003

Ocean space utilization using VLFS(Very Large Floating Structures) can provide environmental impact free space by allowing sea water flow freely through the floating structure. Use of Pontoon type VLFS for that purpose needs employment of breakwaters for reduction of wave effects. Therefore, in order to maximize advantage of environmental impact free structure, the breakwater should be the one that can allow water flow freely through it, too. In this paper hydroelastic response of a pontoon type structure is analyzed considering breakwaters which allow water flow through its opening at bottom of the breakwaters. Mode superposition technique is used for solving equation of flexible body while interactions between the pontoon and breakwaters is considered based on generalized mode concept. Bi-quadratic nine node higher-order boundary element method is adopted for more accurate numerical treatment near sharp edged body shape. Performance of various combinations of breakwaters is investigated.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.13-20
• /
• 1996

해양공간 활용을 위해 예상되는 부유식 해양구조물은 단위구조들이 결합된 형태의 초대형 구조물로서 단위 구조물간의 탄성변형 문제가 매우 중요시되고 있으며 이에 따라 단위구조물간의 상호작용이 고려된 유체력 산출과 탄성응답이 고려된 해석법의 개발이 전세게적으로 활발히 이루어지고 있다. 독립 부유구조물 자체의 크기가 대형화될 때 발생하는 탄성 변형 또한 구조 해석 및 진동관점에서 중요한 고려사항이며, 이는 조선공학분야에서 유탄성 해석기법에 바탕을 두고 연구가 활발히 진행중이다. 본 고에서는 부유구조물의 설계에 있어 핵심기술중 하나인 파랑응답 해석기술의 현황에 대해 살펴보고 현재 한국기계연구원에서 수행중인 국책연구개발사업 "해양공간이용 대형 복합플랜트 개발"의 세부과제인 "부유구조물 파랑응답 해석기법 개발"의 추진내용에 대해 환경 하중/응답해석기술, 계류시스템 설계/해석기술, 유탄성응답 해석기술로 나누어 소개하고자 한다. 해석기술로 나누어 소개하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3B
• /
• pp.315-324
• /
• 2010

We developed a design chart for very large floating structures through intensive hydroelastic analysis. Using this chart, one can predict the hydroelastic response of very large floating structures preliminarily at design stage without the cost-demanding hydroelastic analysis. This paper presents two new design charts based on the theory of VLFS. The purpose of the first design chart is to determine RAOs of the maximum longitudinal stress of VLFS considering properties of waves and structures. The design chart I can be applied to any sizes of VLFS in same aspect ratios and dimensionless stiffness parameters. The second design chart is developed to take into account the actual wave condition by using the Bretschneider spectrum with Beaufort sea state.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.3
• /
• pp.285-292
• /
• 2016

In this study, FE-BE direct coupling methods of 1D and 2D problems are considered for the pontoon-type floating structure and the difference of the modeling dimensions is investigated for the hydroelastic response. The modeling dimensions are defined as the 1D problem consisting 1D beam-2D fluid coupling and the 2D problem consisting 2D plate-3D fluid coupling with zero-draft assumption. For case studies, hydroelastic responses of the 1D Problem are compared to those of the 2D Problem for a wide range of aspect ratio and regular waves. It is shown that the effects of the elastic behavior are increased by decreasing the incident wavelength, whereas the effects of the rigid behavior are increased by increasing the incident wavelength. In 2D problem, the incident wave angle can be considered, and slightly more accurate results can be obtained, but the computational efficiency is lower. On the other hand, in 1D problem with plate-strip condition, the incident wave angle cannot be considered, but when the aspect ratio is large, the overall responses can be analyzed through a simplified model, and the computational efficiency can be improved.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.83-92
• /
• 2007

There are many numerical methods to solve large-scale fluid-structure interaction(FSI) problems. However, these methods require very fine mesh to achieve the reasonable numerical accuracy and stability due to the concentrated and volatile hydrodynamic pressure caused by the liquid sloshing. Consequently, the numerical analysis targeting for the long-period time response with the desired numerical accuracy Is very highly time-consuming. The aim of this paper is to suggest a new method to analyze the hydroelastic behavior of the LNGC containment by using the global-local numerical approach. The reliability of the presented method is firstly examined, and then its efficiency is demonstrated by presenting that the long-period local responses of the LNGC containment are obtained with relatively short CPU time.