• Journal of Korea Water Resources Association
• /
• v.36 no.4
• /
• pp.521-531
• /
• 2003

Pollutant load to Yongdam Reservoir considering rainfall effect is estimated using data collected during dry and wet days between Dec 1998 and Oct. 1999. Limit of significant rainfall was assumed to be as 10 mm/day and numbers of days of significant rainfall for each month were counted using 10 years of meteorological data of the study area. Water quality input concentrations were estimated by taking weighted averages of concentrations in dry and wet days in each month. The resulting concentrations were used as inputs for water quality modeling of Yongdam Reservoir. When rainfall effect was included average reservoir concentrations of BOD, TN and TP were increased by 70％, 5％ and 27％, respectively Considering the fact that Korea is under the significant influence of monsoon effect during the summer, it should be important to include rainfall effect in estimating pollutant input to receiving waters. This method is expected to increase reliability of annual water quality modeling results by providing realistic input data.

• Journal of Korea Water Resources Association
• /
• v.39 no.11 s.172
• /
• pp.935-946
• /
• 2006

This study proposed a new procedure of sustainable water resources planning to prevent the urban streamflow depletion, based on the Heathcote's study in 1998: (1) to understand the watershed component and processes, (2) to identify and quantify problems within the watershed, (3) to set clear and specific goals, (4) to develop a list of management options, (5) to eliminate infeasible options, (6) to test the effectiveness of remaining feasible options, and (7) to develop the final options. PSR(Presure-State-Response) concept was used for the determination of indicators of PSD(Potential Streamflow Depletion; step 2) and effect equation (step 7) and composite programming for the calculation of PSD. The instreamflow requirement was proposed as clear and specific goal (step 3) and was determined by the larger of the PHABSIM's environmental flow and the drought flow. A continuous rainfall-runoff model is necessary to test the effectiveness of alternatives. It should estimate not only the exact runoff but also the effect of landuse change, reservoir, infiltration facility and so on like SWAT(Soil and Water Assessment Tool). The proposed procedure will be applied on the corresponding paper.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.218-224
• /
• 2000

The antimicrobial activities of chitosan oligosaccharide(chitohexaose) and two types of chitosans M.W.(10,000 and M.W. 100,000) were examined against Escherichia coli O157 : H7(ATCC 43894), Staphylococcus aureus(ATCC 144458) and Candida albicans(KFRI 432). Chitosan with molecular weight of 10,000 showed the strongest antimicrobial activities to E. coil O157 : H7 and S. aureus, whereas chitohexaose acted most strongly against C. albicans. The most effective concentration of chitosan was measured to be 0.1 mg/mL for E. coil O157 : H7 and S. aureus, and that of chitohexaose to be 1 mg/mL for C. albicans. Antimicrobial activities of chitosans and chitohexaose were maintained for 60 min after their treatment. They were found to induce leakage of intracellular proteins and nucleic acids from treated microorganisms. The efflux determined by assaying the ${\beta}-galactosidase$ leaked from the lactose-induced E. coli O157 : H7 cells was observed to reach the highest level within 60 min after treatment with the antimicrobial agents and chitosan with 10,000 molecular weight gave the highest ${\beta}-galactosidase$ activity. Therefore, it is supposed that the antimicrobial activity of chitosan with its unique polycationic nature might be caused by its binding to anionic component(s) of the cell envelope and thereby inhibiting the membrane metabolism and/or leaking intracellular materials.

• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.536-548
• /
• 2019

In order to quantify the effect of the newly established the Total Water Load Management System in Sapgyo watershed, this study predicted the achievement of the target water quality at each unit watershed and the water quality according to the flow section. The HSPF model, which is the watershed runoff model, was constructed and operated based on 2015, and the water quality was predicted by inputting the loads in final target year(2030). The Load Duration Curve (LDC) was created using the simulated results of base year and target year. As a result of plotting water quality by flow conditions, it was simulated to be close to the BOD target with a difference of 0.1 ~ 0.2 mg/L in all three watersheds during the mid-range flow interval (40 ~ 60%). In case of T-P, although the target water quality was not set, the water quality was improved by Cheonan A 46%, Kokgyo A 29% and Namwon A 25%. The Muhan and Sapgyo river basins meet the target grade of middle-watershed standards. The improvement effect will be positive, as water quality, which achieves the target of Total Load Management System and the target grade of the middle-watershed standards will be expected to flow into the Sapgyo lake.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.1
• /
• pp.11-20
• /
• 2003

The pollution loads flowing into Mokpo harbour from land in dry case were estimated on the bases of the seasonal flow rates and the seasonal water qualities of streams and effluents located around Mokpo harbour. Average daily amount of fresh water Stowing into Mokpo harbour obtained by the inflow rate data of 4 seasons was found to be about 5.5×10/sup 6/㎥/day and annual inflow rate to be about 2×10/sup 9/㎥/year. The seasonal flow rates of effluents iron Yongsan lake were above 90％ of total flow rates of all inflows in 4 seasons. The concentrations of COD, TSS, TIN and TP at 9 inflow stations Iron streams and effluents in 4 seasons were shown to be in the ranges of 2.87~42.69㎎/ℓ, 3.65~1080.32㎎/ℓ, 0.083~89.744㎎/ℓ and 0.028~6.926㎎/ℓ, respectively. The average loads of COD, TSS, TIN and TP into Mokpo harbour estimated by the data of 4 seasons were found to be about 37 ton/day, 64 ton/day, 13 ton/day and 1.2 ton/day, respectively. The loads of COD, TSS, TIN and TP into Mokpo harbour in summer were shown to be about 82 ton/day, 159 ton/day, 14 ton/day and 2 ton/day, respectively. The main source of pollution loads into Mokpo harbour was found to be the effluent of Yongsan lake.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.1
• /
• pp.79-88
• /
• 2010

준분포형 모형인 SWAT 모형은 소유역내 수문학적 반응단위 별로 유출, 유사 등의 발생을 평가하는데 이때 Hydrological Response Unit (HRU)의 지형정보가 활용된다. 현재 SWAT 모형의 인터페이스 구조는, 각 소유역의 평균 지형인자 값이 각 소유역내의 모든 HRU의 지형정보로 사용된다. 그러므로 각 소유역내의 HRU에 있는 지형인자를 정확하게 추출하기 위해서는 수계를 자세하게 나누어야 하며, 이를 위해서 더욱 자세한 소유역 수계 인터페이스가 필요하다. 현재 SWAT 모형 인터페이스에서는 수계를 나눌 때 임계값의 최소값은 최대 flow accumulation 값의 0.1 %가 사용된다. 따라서 HRU의 지형인자를 추출하기 위해 아주 자세한 정도로 소유역의 수계를 나눈다는 것은 불가능하다. 본 연구에서는 사용자가 원하는 임계값과 농경지 경계를 근거하여 소유역 경계를 추가로 수계를 나눌 수 있는 Dual Watershed Delineation Module (DWDM) 을 개발하였다. 기존 SWAT의 수계추출 모듈로 유량을 모의한 결과 $27,219\;m^3$/month 가 산정되었고, DWDM 을 적용한 결과 $26,172\;m^3$/month 로 약 3.8 %의 미미한 차이가 생겼다. 하지만 유사의 경우 DWDM을 적용하기 전에는 0.779 ton/month, 적용 후에는 2.688 ton/month 로 약 245 %의 차이를 보였다. 즉 농경지를 추가적으로 수계를 나눌 때 유사의 가장 민감한 요소인 경사장을 실제지형에 맞게 고려함에 따라 좀 더 정확한 유사 산정을 할 수 있었다. 농경지에서의 정확한 수문 및 유사 평가 시 본 연구에서 개발한 모듈이 적용 되어야 한다고 사료된다.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.3
• /
• pp.33-37
• /
• 2004

Soil samples used in this study were taken from the site at which diesel spill accident had occurred in 1995. It was confirmed that all of soil samples were contaminated with diesel which was going on weathering. The concentrations of diesel in soils were determined by Korea standard method revised in July 1999 (Method 1) and US EPA method 8015b (Method 2). Some additional soil samples were analyzed with Korea standard method revised in July 2002 (Method 3) to compare the accuracy and reproducibility with Method 2. The only four of forty-six samples were determined when the analysis carried out according to Method 1 while forty-three of forty-six samples had the value above criterion (2000mg kg$^{-1}$ ) according to Method 2. There were no significant differences between the results of the analysis by Method 2 and Method 3. Based on these results, Method 2 and 3 were more appropriate than Method 1 for the determination of weathered diesel in soil. Method 2 had almost equivalent accuracy and reproducibility to Method 3.

• Journal of Korea Water Resources Association
• /
• v.41 no.10
• /
• pp.969-982
• /
• 2008

As hydrological models have been progressively developed, they are recognized as appropriate tools to manage water resources. Especially, the need to evaluate the effects of landuse and climate change on hydrological phenomena has been increased, which requires powerful validation methods for the hydrological models to be employed. As measured streamflow data at many locations may not be available, or include significant errors in application of hydrological models, streamflow data simulated by models only might be used to conduct hydrological analysis. In many cases, reducing errors in model simulations requires a powerful model validation method. In this research, we demonstrated a validation methodology of SWAT model using observed flow in two basins with different physical characteristics. First, we selected two basins, Gap-cheon basin and Yongdam basin located in the Guem River Basin, showing different hydrological characteristics. Next, the methodology developed to estimate parameter values for the Gap-cheon basin was applied for estimating those for the Yongdam basin without calibration a priori, and sought for validation of the SWAT. Application result with SWAT for Yongdam basin showed $R_{eff}$ ranging from 0.49 to 0.85, and $R^{2}$ from 0.49 to 0.84. As well, comparison of predicted flow and measured flow in each subbasin showed reasonable agreement. Furthermore, the model reproduced the whole trends of measured total flow and low flow, though peak flows were rather underestimated. The results of this study suggest that SWAT can be applied for predicting effects of future climate and landuse changes on flow variability in river basins. However, additional studies are recommended to further verify the validity of the mixed method in other river basins.

• Journal of Korea Water Resources Association
• /
• v.39 no.1 s.162
• /
• pp.79-88
• /
• 2006

An accurate prediction of inflow water temperature is essentially required for real-time simulation and analysis of rainfall-induced turbidity 烈os in a reservoir. In this study, water temperature data were collected at every hour during the flood season of 2004 at the upstream of Daecheong Reservoir to justify its characteristics during rainfall event and model development. A significant drop of river water temperature by 5 to $10^{\circ}C$ was observed during rainfall events, and resulted in the development of density flow regimes in the reservoir by elevating the inflow density by 1.2 to 2.6 kg/$m^3$ Two types of statistical river water temperature models, a logistic model(DLG) and regression models(DMR-1, DMR-2, DMR-3) were developed using the field data. All models are shown to reasonably replicate the effect of rainfall events on the water temperature drop, but the regression models that include average daily air temperature, dew point temperature, and river flow as independent variables showed better predictive performance than DLG model that uses a logistic function to determine the air to water relation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1996.01a
• /
• pp.1-95
• /
• 1996

전국에 산재한 수위관측지점의 관측개시 이후의 모든 홍수위 자료를 구성하고 주요 지점의 개별 홍수사상에 대한 단위도를 유도하여 지점별 대표단위도를 작성하였다. 또한 유도된 대표단위도를 이용하여 미계측 지점에 대한 단위도와 첨두홍수량을 추정하였다. 연구 결과를 요약하면 다음과 같다. 1991년과 1992년에 이어서 1993년에도 홍수위자료의 수집과 정리에 역점을 두어 관업을 수행하였으며 조선하천조사서, 조선하천조사연보, 한국수문조사연보 등의 각종 문헌에 수록되어 있는 주요 홍수사상의 수문곡선을 판독하여 전국 220개의 수위관측지점에 대하여 총 5,735개 사상의 홍수위 자료를 구축하였으며 이를 자료집으로 구성하였다. 홍수사상에 대한 단위도를 유도하기 위하여 시우량자료는 기상청 자료를 중심으로 구성하였으며 효율적이고 안정적인 능형회귀방법을 이용한 단위도 유도 방법을 적용하여 사용자가 화면을 통해서 홍수사상과 유도된 1mm-1hr 단위도를 보고 적합한 단위도를 선택할 수 있도록 단위도 유도 프로그램을 개발하였다. 대부분의 홍수사상이 지정홍수위 이상인 범위만이 정리되었는데 지정홍수위 이하의 부분은 일수위로부터 읽은 값을 참고로 하고 대수보간을 하여 자료를 구성하도록 하였다. 개발된 단위도 유도 프로그램을 사용하여 지점별 홍수사상별로 단위도를 유도하여 유역별로 총 65개 지점에 대하여 952개의 단위도를 유도하였는데 한강 유역은 16개 지점에서 263개의 단위도를 유도하였고 낙동강 유역은 28개 지점에 460개 단위도를, 금강 유역은 7개 지점 82개 단위도를, 영산강 유역은 7개 지점에서 88개 단위도를, 섬진강 유역은 7개 지점에서 59개의 단위도를 유도하였다. 유도된 단위도들을 지점별로 평균하고, 이를 참고로 하여 Nash 모형을 이용한 지점별 대표단위도를 유도하여 정리하였다. 또한 유도된 대표단위도를 유역에 따라서 지점별로 비교하여 상하류간의 관계를 분석하였으며 신뢰할만한 결과로 판단되었다. 유도된 대표단위도의 첨두유량 및 첨두시간을 유역면적 등과 비교하여 그 관계를 검토하였다. 유역면적과 첨두유량 및 유역면적과 첨두시간의 관계는 비교적 일정한 경향을 보여주었으며 이를 이용하여 미계측 유역의 1mm-1hr 단위도를 추정하였다. 2년 빈도의 설계강우량에 대해서 유역면적이 50, 100, 1,000, 10,000, 20,000$\textrm{km}^2$인 경우 첨두홍수를 추정하였으며 유출률을 0.9로 할 때 4장에서 분석, 제시된 지점별 평균연최대홍수와 비슷한 값을 보여주었다. 따라서 미계측 유역에서는 설계강우량만 주어진다면 본 연구에서 추정된 미계측 유역의 단위도 추정 방법을 이용하여 첨두홍수를 추정할 수 있을 것으로 판단된다. 본 연구의 단위도 유도 대상 지점은 전국의 수위관측지점이었으나 5대강을 제외한 기타 수계에 있어서는 수위자료뿐만 아니라 유량측정성과도 미비하여 단위도 유도를 하지 못하였다. 또한 유역면적 500$\textrm{km}^2$ 이하에서는 홍수위 자료는 있어도 유량측정성과가 없는 지점이 많았고 육량측정성과가 수 회에 불과한 지점이 대부분이었기 때문에 단위도를 유도할 수 없었다. 따라서 분석된 결과를 소유역으로 연장하는 것은 다소 무리가 따르며 대략 어느 정도가 될 것이라는 참고자료로 이용하는 것이 바람직하다고 본다. 현재의 여건에서는 소유역의 유량측정성과를 확충하는 일이 급선무일 것이다. 유역면적이 작은 수위 관측 지점에 대한 지속적인 유량측정이 절실히 요구된다.