• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.213-229
• /
• 2017

Recently, in urban areas there is a tendency to construct more complex network-type tunnels including entrance and exit ramps. At the same time, various one-dimensional programs based on the network theory have been proposed for tunnel ventilation analysis. This paper aims at developing a program that can analyze the ventilation flow rate and pollutants concentration in complex network-type tunnels based on the none hardy-cross method. The flow analysis in the branch was carried out on the basis of the Gradient method, while for the concentration analysis a new logic has been developed to calculate the inflow and outflow concentration automatically in a complex network-type structure. Additionally, in the tunnel segments showing low flow rate, proper grid interval sizes were proposed to reduce numerical error. To verify the applicability of the program, flow rates predicted in the straight tunnels were compared with the classical velocity-diagram method by Stokic and the TVSDM program. The results showed that the errors were within 1%. In addition, the program was applied to the recent ventilation system adopted in the complex network-type urban tunnels.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.4
• /
• pp.165-173
• /
• 2005

Field observations have been conducted to investigate the physical environment around oyster farms in Gamak Bay. Tidal waves near the two channels at the northeast and south of the bay had almost the same amplitudes and phases. Water temperature responded sensibly to the tides, rising at high water and falling at low water, except for the northwest region. The currents more regularly varied in accordance with a tidal period as long as they are at the faster-flowing region. A considerable flow has been found near the seabed of the northwest of the bay, normally known to be a stagnant area, and also the flow was opposite to the surface flow. Average moving speeds and directions of the flow at each station coincided well with patterns of the residual currents computed by Lee ef al. [2004], except for the northwest region. The discrepancy for the northwest region is not clear but it may have resulted from the facts that the computed flow pattern represents only the case of spring tide and in addition, a northwesterly wind prevailed all the observation time.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.568-577
• /
• 2002

The spreading Cocuoainim polykikoides bloom in the southern coastal waters of Korea was simulated using numerical model including the physical processes of water flow and the chemical processes of increasing cell of C. polykikoides by uptake of dissolved nutrients. The circulation of sea water was simulated by two dimensional tide model reflecting the main four tidal components of $M_2,\;S_2,\;K_1,\;O_1$, and permanent current was driven by inflow/outflow across open boundaries. According to the result of model which tidal and permanent current were reflected simultaneously, eastward flows entering the southern waters from the western waters of Korea are dominant but westward flows are weak relatively. These result suggest that it is difficult for initial C. polykikoides bloom generated in the coastal waters of Goheung to move to the western coast of Korea through Jeju Strait. For spreading model of C. poiyhikoides, the range of generating distribution and the generating time of C. polykikoides bloom in coastal area are similar to those of observation data in the field. Wind is the most important factor in moving and distribution of red tide. Permanent current flowing eastward is also considered to be important factor and tidal current was a little influenced.

• Journal of Korea Water Resources Association
• /
• v.52 no.2
• /
• pp.149-161
• /
• 2019

In this study, the effect of the fluid flow characteristics on the length distribution of the fracture elements composing the fracture network is analyzed numerically using the 3D fracture crack network model. The truncated power-law distribution is applied to generate the length distribution of the fracture elements and the simulations of fluid flow are carried out with the exponent ${\beta}_l$ from 1.0 to 6.0. As a result of simulations, when the exponent ${\beta}_l$ increases, the length distribution of the fracture elements gradually decreases, and the connectivity between the fracture elements affecting the permeability of the fracture network becomes weak. When we analyzed the distributions of flow rate calculated at each fracture element with the exponent ${\beta}_l$, the mean flow rate at ${\beta}_l=1.0$ was estimated to be about 447 times larger than that at ${\beta}_l=6.0$ and for the flow calculated at the outflow boundary of the fracture network, the case of ${\beta}_l=1.0$ was estimated to be 6,440 times larger than that of ${\beta}_l=6.0$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.655-662
• /
• 2021

This study aimed to estimate exploitable groundwater for the sustainable supply of groundwater in the Jinju region of South Gyeongsang Province. As an integrated hydrologic analysis model, SWAT-MODFLOW was used to estimate the distributed groundwater recharge in consideration of land use and soil distribution. As a result of calibration of the model, the coefficient of determination between the observed flow and the simulated flow was 0.75-0.80, which was good. The simulated groundwater recharge rate showed a spatio-temporal distribution due to heterogeneous watershed characteristics. The amount of groundwater recharge shows lower values over winter and spring, but it increases according to the pattern of precipitation in summer and autumn. The calculated average annual groundwater recharge was compared with the result using the baseflow separation method of natural flow, and the deviation of both results was small, within 3 %, confirming the validity of the estimated groundwater recharge. Exploitable groundwater is defined as the amount of recharge corresponding to low flow with 10 years of return period. Therefore, in this study, 14.2 % of the annual precipitation was found to be exploitable as a result of calculating the amount of recharge at a 10-year frequency using a statistical frequency analysis technique.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.340-340
• /
• 2021

가뭄의 특성상 시점과 종점을 명확하게 정의하기 어렵기 때문에 기준수문량을 설정하고 부족량과 지속기간을 정의하는 것이 일반적이다. 대상 수문량은 강우나 유출량을 사용할 수 있지만, 두 성분간 지체와 감쇄효과로 인하여 빈도해석의 결과는 차이를 보일 수 밖에 없어, 사용 목적에 따라 선별적으로 적용해야 한다. 가뭄빈도해석은 강우를 기반으로 지속기간과 심도를 정의하여 빈도를 해석하는 연구가 선행되어왔지만, 기본적으로 강우의 간헐적 발생특성과 체감도의 한계가 문제로 지적되고 있다. 본 연구에서는 댐 유입량의 Run 시계열 특성을 이용하여 다양한 유황을 기준유량으로 활용하여 가뭄의 시점과 종점에 대한 가뭄사상을 추출하고 지속기간과 누적부족량을 계산하여 가뭄빈도해석의 변수로 설정하였다. 두 변수간의 복잡한 상호 관계를 해석하기 위해 Copula 함수를 이용한 이변량 가뭄빈도해석을 진행하였다. 먼저 소양강댐('74-'19) 유입량, 충주댐('86-'19) 유입량을 연구대상지역으로 설정하여, 두 유역의 유입량의 추세분석을 통해 시간의존성을 파악하였다. 유황분석에 사용되는 분위량중 평수량을 기준값으로 사용하여 각 년별 최대 지속기간과 누적부족량을 추출하였다. Copula 가뭄빈도해석을 수행하기 전에 지속기간에는 GEV, 누적 부족량에는 Log-normal 분포를 적용해 단변량 누적확률분포를 계산하여 재현기간을 도출하였다. 이변량 빈도해석에 Clayton Copula 함수를 적용하여 가뭄빈도해석을 진행하였고, Copula 이변량 재현기간과 SDF곡선을 도출하였다. Clayton Copula를 이용한 이변량 가뭄빈도해석의 결과로 소양강댐의 가장 극심한 가뭄은 1996년으로 단변량 재현기간은 지속기간 기준 9.11년, 누적부족량 기준 17.26년, Copula 재현기간은 141.19년 이며 충주댐의 가장 극심한 가뭄은 2014년으로 단변량 재현기간은 지속기간 기준 17.76년, 누적부족량 기준 18.72년, Copula 재현기간은 184.19년으로 단변량 가뭄빈도해석을 통한 재현기간보다 Copula 재현기간이 높은 결과가 도출되었다. Run 시계열을 바탕으로 한 기준유량의 임계값 기준 Event 산정과 Copula를 이용한 빈도해석은 가뭄분석에 이용되는 자료의 상관관계와 분포특성을 재현하는데 효과적인 특징이 있다. 이를 미루어 보아 Copula 함수를 이용한 가뭄빈도해석의 재현기간은 보다 현실적인 재현기간을 도출할 수 있는 것으로 판단된다. 임계값의 조정을 통해 가뭄빈도해석의 변수의 양이 늘어나면, 보다 정확도 높은 재현기간을 도출하여 수문학적 가뭄을 정의할 수 있을 것이라고 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.219-219
• /
• 2021

서해안 중부 아산만 안쪽에 위치하는 평택·당진항에서 장래 개발 예정인 면적 6.9km²의 내항2공구 수역은 내항2공구 외곽호안 - 내항가호안 - 내항2공구 중앙 분리호안으로 둘러싸여 있으며, 투수성 제체인 내항가호안 사석 공극을 통하여 해수가 유통되어 조석 현상이 나타나고 있다. 2020년 8~9월의 2개월간 내항2공구 외곽호안 내·외측에서 조석 관측 결과, 2공구 수역의 최대 조차는 1.97m로서 외측 해역 최대 조차 9.79m의 20.1%이고 내·외측의 순간 수위차는 최대 5.82m에 달한다. 내항가호안은 내항2공구 개발이 거의 완료되는 시기까지 유지될 예정이므로 2공구 개발에 따른 내측 조차와 내·외측 수위차의 변화를 정확하게 예측하는 것은 내항가호안 제체 안전에 매우 중요하다. 이 연구의 목적은 장래 개발단계별 변화 예측에 앞서, 관측이 이루어진 2개월간의 실시간 내측 조석과 내·외측 수위차 시계열을 Delft3D-Flow를 이용하여 기 구축된 아산만 수치모델에서 재현하는 것이다. 내항가호안 제체 통과 유량은 내·외측 수위차에 비례하는 것으로 가정하고, 수위차 - 유량 관계식을 도출하였다. 수위차는 평택 조위관측소와 내항2공구 수역의 1분 간격 관측 조위로부터 산출하였고, 제체 통과 유량은 내측 조위(z, 평택항 DL 기준, m) - 수용적(V, 10⁶m³) 관계식으로 계산하였다. 내측 조위 - 수용적 관계식은 수심측량 성과로부터 V = 0.28z² + 3.73z + 2.96 (r²=1.00)으로 얻어졌다. 다양한 함수식의 적합성을 검토한 결과, 다음과 같은 수위차(𝚫z, m) - 제체 통과 유량(Q, m³/s) 관계식을 도출하였다. [내항가호안 내측으로 유입시] $Q_{IN}=\{\begin{array}{lll}{\exp}\{0.54\;{\ln}({\Delta}z)+6.00\}&&\text{; }{\Delta}z{\leq}1.8\\219.82{\Delta}z+158.56&&\text{; }{\Delta}z>1.8\end{array}\;\;(r^2=0.86)$ [내항가호안 외측으로 유출시] Q_OUT = -exp{0.44 ln(-𝚫z) + 5.70} (r²=0.59) 매 𝚫t 마다 제체 통과 유량을 계산하는 알고리즘을 Delft3D 소스 코드에 추가하고, 8개 분조 합성조석(M₂, S₂, K₁, O₁, N₂, K₂, P₁, Q₁)을 외력조건으로 설정하여 2개월간 조석 수치모델링을 수행하였다. 내항2공구 수역의 매 시별 조위 관측치와 모델치를 비교한 결과, 오차는 -0.37~0.37m의 범위이고, 오차 평균은 0.02m, 절대오차 평균은 0.08m로 상당히 정확하게 실시간 조위 변동을 모의하였다. 보정·검정된 이 모델을 이용하여 향후 내항2공구 개발에 따른 내측 조석과 내·외측 수위차 변화에 대한 예측모의를 진행할 예정이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4B
• /
• pp.345-354
• /
• 2006

Drought brings on long term damage in contrast to flood, on economic loss in the region, and on ecologic and environmental disruptions. Drought is one of major natural disasters and gives a painful hardship to human beings. So we have tried to quantify the droughts for reducing drought damage and developed the drought indices for drought monitoring and management. The Palmer's drought severity index (PDSI) is widely used for the drought monitoring but it has the disadvanges and limitations in that the PDSI is estimated by considering just climate conditions as pointed out by many researchers. Thus this study uses the SWAT model which can consider soil conditions like soil type and land use in addition to climate conditions. We estimate soil water (SW) and soil moisture index (SMI) by SWAT which is a long term runoff simulation model. We apply the SWAT model to Soyang dam watershed for SMI estimation and compare SMI with PDSI for drought analysis. Say, we calibrate and validate the SWAT model by daily inflows of Soyang dam site and we estimate long term daily soil water. The estimated soil water is used for the computation of SMI based on the soil moisture deficit and we compare SMI with PDSI. As the results, we obtained the determination coefficient of 0.651 which means the SWAT model is applicable for drought monitoring and we can monitor drought in more high resolution by using GIS. So, we suggest that SMI based on the soil moisture deficit can be used for the drought monitoring and management.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.2
• /
• pp.103-114
• /
• 2013

The Korea Atomic Energy Research Institute has developed a performance assessment model implementing the A-KRS concept, which was constructed with the GoldSim. In the A-KRS concept, spent nuclear fuel produced from pressurized-water-reactor operations would be pyroprocessed to reduce waste volume and radioactivity. The wastes to be disposed of in a geologic repository are comprised of metal and ceramic waste forms. In this study, results of simulations conducted to establish credibility and build confidence for the A-KRS model are presented. Specifically, release rates and breakthrough times simulated using the A-KRS model were compared to corresponding results from the U.S. NRC SOAR model. In addition, the A-KRS model results were compared to published release rates from the SKB repository performance assessment. This comparison of the A-KRS model results to other independent performance assessments is expected to form part of a suite of model verification and validation activities to provide confidence that the A-KRS model has been implemented appropriately.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.691-698
• /
• 1997

The risk assessment model for dam and levee is applied to a river where two adjacent dams are located in the upstream of the watershed. "A" dam is proven to be safe with 200-year precipitation and unsafe with PMP condition, whereas "B" dam to be safe with 200-year precipitation and PMP condition. The computed risk considering the uncertainties of the runoff coefficient. initial water depth and relevant data of the dam and spillway turn out to be equivalent results in Monte-Carlo and AFOSM method. In levee risk model, this study addresses the uncertainty of water surface elevation by Manning's equation. Monte-Carlo simulation with the variations of Manning's roughness coefficient is calculated by assuming that it follows atriangular distribution. The model can be used for preparing flood risk maps, flood warning systems, and establishing nation's flood disaster protection plan.