• 제목/요약/키워드: 유체학

검색결과 1,372건 처리시간 0.025초

유도초음파기술을 이용한 배관 감육 평가 (Assessment of Pipe Wall Loss Using Guided Wave Testing)

  • 주경문;진석홍;문용식
    • 비파괴검사학회지
    • /
    • 제30권4호
    • /
    • pp.295-301
    • /
    • 2010
  • 원자력발전소 탄소강 배관의 유체가속부식은 주요 경년열화 현상이며 발전소의 성능 및 안전성을 저해할 수 있다. 유체가속부식 검사는 보온재 제거 및 설치로 상당한 비용이 수반되므로 최근에 보온재 제거가 필요 없고 원거리 검사가 가능한 유도초음파에 대한 관심이 점점 증가되고 있다. 유체가속부식 검출에 유도초음파 적용이 가능하다면 검사 비용 절감이 예상된다. 본 연구의 목적은 유체가속부식 손상 유무를 확인하고 결함 검출능을 결정하기 위함이다. 본 연구에서는, 실제 유체가속부식 손상 시험편의 엘보우 첫 번째 용접부와 두 번째 용접부의 진폭 감쇄비를 측정하기 위하여 3가지 검사 기법을 사용하였다. 연구 결과, 유체가속부식 손상을 검출하기 위한 최적의 검사 기법과 최소 결함 검출능을 도출하였다.

탄산염암 내 표면개질된 실리카 나노유체 주입 효과 분석 (Analysis of Effect of Surface Modified Silica Nanofluid Injection on Carbonate Rock)

  • 장호창
    • 한국가스학회지
    • /
    • 제26권2호
    • /
    • pp.1-8
    • /
    • 2022
  • 본 연구에서는 탄산염암 저류층에서 활용 가능한 GPTMS((3-Glycidoxypropyl)trimethoxysilane)-SiO2 나노유체를 제조하고 주입 효과를 분석하였다. 표면개질에 따른 나노입자의 구조적 변화를 확인하기 위해 푸리에변환적외선분광(Fourier transform infrared spectroscopy, FTIR) 분석을 수행했으며, 0.5 mmol/g 이상의 GPTMS 농도에서 실리카 입자의 표면개질을 의미하는 2,950 cm-1의 C-H 신축 진동(C-H stretching vibration)을 확인하였다. 또한, 친유성 상태로 에이징된 석회석과 백운석을 대상으로 나노입자의 농도와 주입률에 따른 GPTMS-SiO2 나노유체의 코어유동 실험을 수행하였다. 나노유체 주입에 따라 최대 18.9%의 오일이 추가로 회수되었으며, 암석의 접촉각과 투과도 변화를 확인할 수 있었다. 이는 나노입자가 탄산염암 표면에 흡착됨에 따라 습윤도를 개선함과 동시에 공극에 영향을 준다는 것을 의미한다. 따라서, 제조된 나노유체는 탄산염암 저류층을 대상으로 한 석유회수증진의 주입유체로 사용될 수 있으며 습윤도, 투과도 변화와 같은 유체 유동물성 개선에 활용될 것으로 기대된다.

입자법을 이용한 축대칭 탄자의 관통거동 수치해석 연구 (A Study on Numerical Perforation Analysis of Axisymmetric Bullet by the Particle Method)

  • 김용석;김용환
    • 한국군사과학기술학회지
    • /
    • 제11권6호
    • /
    • pp.164-171
    • /
    • 2008
  • A modified generalized particle algorithm, MGPA, was suggested to improve the computational efficiency of standard SPH method in numerical analysis of high speed impact behavior. This method uses a numerical failure mechanism than material failure models to describe the target penetration. MGPA algorithm was more effective to describe the impact phenomena and new boundaries produced during the calculation process were well recognized and treated in the target penetration problem of a bullet. When bullet perforation problems were analyzed by this method, MGPA algorithm calculation gives the stable numerical solution and stress oscillation or particle penetration phenomena were not shown. The error range in ballistic velocity limit is less than $2{\sim}13%$ for various target thickness.

SPH를 이용한 봉충돌 해석에서 구성방정식의 특성 (Characteristics of Constitutive Equations under Rod Impact Analysis by Smoothed Particle Hydrodynamics)

  • 김용환;김용석;이정민
    • 한국군사과학기술학회지
    • /
    • 제6권3호
    • /
    • pp.62-73
    • /
    • 2003
  • The characteristics of constitutive equations, for hydrocodes, were Investigated by the comparison between the smoothed particle hydrodynamcis simulation and the experiment of rod impact test which resulted in a deformation history of impacting front where high strain and high strain rate dominate. The constitutive equations used in the simulation Is J-C(Johnson-Cook) model, Z-A(Zerilli-Armstrong) model, and S-C-G(Steinberg-Cochran-Guinan) model. The modification of Z-A model, based on the increased effect of strain-rate hardening, showed better correlation with expriment.

케이싱을 고려한 홴의 유동 및 소음해석 프로그램 응용

  • 이덕주;전완호;정기훈
    • 소음진동
    • /
    • 제11권1호
    • /
    • pp.5-14
    • /
    • 2001
  • 송풍기나 홴과 같은 유체기계의 소음은 최근 들어 사람들의 관심을 끌면서 많은 사회적 문제가 되고 있다. 이러한 문제는 유체기계가 제품의 구매요구를 결정할 뿐만 아니라 환경소음의 규제와도 관계가 깊다. 이런 홴이나 송풍기 소음은 축 편심에 의한 진동 소음과, 유동에 의한 유동소음이 있는데 대형 송풍기는 진동 소음과 유동 소음이 동시에 존재하지만 중소형 송풍기는 유동 소음이 우세하다. 유동 소음은 공력음향학이라는 학문의 한 분야로 유동에 대한 정보가 있어야 정확한 소음원을 파악하고, 특성도 예측이 가능하다. 유동과의 강한 연관성 때문에 지금까지 송풍기의 유동 소음에 대한 연구가 미약하였다.(중략)

  • PDF

수직 기포류 수치해석을 위한 2유체 모델 검증 (Validation of the Two-fluid Model for Vertical Bubbly Flows)

  • 김명호;김병재
    • 한국가시화정보학회지
    • /
    • 제16권1호
    • /
    • pp.37-41
    • /
    • 2018
  • The two-fluid model is widely used for practical applications involving multi-phase flows in chemical reactor, nuclear reactor, desalination systems, boilers, and internal combustion engine. There are several modeling terms in the two-fluid model, which must be determined properly. This study suggests the best models for turbulent vertical bubbly flow.