• 한국전기전자재료학회논문지
• /
• 제37권6호
• /
• pp.619-629
• /
• 2024

Dielectric resonators with BT (BaTiO₃), TiO₂, and ZrO₂ powders without using the rare earth oxide powders were fabricated for the target relative permittivity of between 30 and 40 and the filter characteristics of metal cavity filter with the dielectric resonators inside were evaluated. Powder characteristics such as particle size distributions and specific surface areas were measured for the composing raw powders to evaluate the powder states. After measuring and comparing the relative permittivity and dielectric losses of the dielectrics of three different compositions, the specific composition was determined (BT:TiO₂:ZrO₂=1:4:1 in mole) and the dielectric resonators were fabricated with that composition, which shows relative permittivity of around 35. The powder characteristics of mixed powders with the determined composition were also evaluated to investigate any agglomerates possibly formed in the process of powder mixing. Dielectric resonators were fabricated by the powder compaction (compaction pressure: 31 MPa) and firing method. The peak firing temperature was 1,300℃ and the holding time at the peak temperature was 3 hours. After firing, cylindrical resonators with one end closed were mechanically machined to eliminate any size differences in dielectric resonator which can be caused by the shrinkage difference during each firing process of resonator fabrication. After measuring the resonator characteristic in the frequency range from 3.6 GHz to 3.8 GHz by changing the height of dielectric resonator, the height of the resonator was determined to be 11.7 mm. Finally, filter characteristics of TM (Transverse Magnetic) mode metal cavity filters with the dielectric inside were measured and evaluated. The metal cavity filters with the dielectric resonators showed the insertion losses of below 1 dB with the band widths of 200 MHz and over 20 dB return losses from 3.6 GHz to 3.8 GHz, whose filter characteristics well satisfied the requirements of the band pass filters for the base stations and it was proved that the dielectrics using the proposed composition could be used as dielectric resonator.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.125-129
• /
• 2000

In this paper, We designed and fabricated C-band bandpass filter using dielectric resonators. From waveguide cutoff frequency which applied the region between adjacent dielectric resonators, the height of cavity is determined. The cavity's diameter is determined to the twice of dielectric resonator's diameter considering the conductor loss. The resonant frequency of the DR-cavity is calculated with travelling wave mode analysis. Conventionally, circular cylindrical dielectric resonator is analysed by Cohn's model which use the evanescent mode in the region between dielectric resonator wall and circular cavity wall, which is an approximated method. The external quality factor, Q$_{ex}$ has found with simulation result using Ansoft's Maxwell simulation tool. The designed filter using dielectric resonators with dielectric constant of 45 has the passband center at 5.065GHz. The bandpass filter using dielectric resonators have about 1dB insertion loss. 20MHz bandwidth and more than 30dB attenuation at f$_{0}$$\pm$15MHz.z.z.

• Progress in Superconductivity
• /
• 제8권2호
• /
• pp.143-151
• /
• 2007

Accurate measurements of the microwave surface resistance (Rs) of high temperature superconductor (HTS) films are important with regard to applications of HTS materials for wireless communications. As the surface resistance values of HTS films are usually extracted from the measured unloaded quality factor ($Q_0$) of resonators made of HTS films, it is essential to measure the resonator $Q_0$ with accuracy. The $TE_{011}\;mode\;Q_0$ of sapphire resonators with the endplates made of $YBa_2Cu_3O_{7-{\delta}}$(YBCO) film on $LaAlO_3$ is measured by using the S-parameter circle-fit method at a frequency of about 19.6 GHz and temperatures of 30 K to 90 K, which is compared with the measured values by using the Lorentzian-fit method. Good agreements are found between the two sets of $Q_0$ values measured by using the two different methods whether the resonator is used in a weak-coupling scheme or a strong-coupling scheme, showing reliability of both methods fur measuring the resonator $Q_0$ accurately. The $Q_0$ of sapphire resonators with a gap between the top plate and the rest of the resonator is also discussed.

• 한국인터넷방송통신학회논문지
• /
• 제22권1호
• /
• pp.121-126
• /
• 2022

본 연구는 변형된 힐버트 커브 프랙탈 모노폴 구조를 단순화하여 육각형 대칭 패턴을 가지면서 모노폴 형태로 구현한 안테나에 대한 것이다. 힐버트 커브 프랙탈 모노폴 구조를 단순화하여 소형화했을 뿐 아니라 성능 개선을 모색하기 위해 복사기 구조를 육각형 대칭 패턴으로 구현했다. 기판 유전체의 비유전율은 4.7이며, 미앤더 형태로 대칭 구조를 갖는 총 선로길이는 59 mm이다. 안테나의 크기는 10 mm × 10 mm × 0.8 mm이고, 선폭은 0.4 mm이다. 안테나 측정 지그의 크기는 64 mm × 21 mm × 1 mm이다. 공진주파수는 1.57 GHz 이고, 주파수 범위는 1.51 ~ 1.615 GHz이다. 주파수대역폭은 105 MHz이다. 안테나 이득은 YZ-plane의 측정이득은 2.32 dBi 이고, XZ-plane의 경우 -1.03 dBi를 얻었다. 결과적으로 육각형 대칭 패턴 프랙탈 구조를 이용하여 안테나 소형화를 이루었으며, 복사기 구조 변화로 안테나 성능 개선이 용이함을 확인했다.

• 대한전자공학회논문지SD
• /
• 제43권9호
• /
• pp.64-68
• /
• 2006

본 연구에서는 Si bump를 이용해 기판의 기계적, 열적 특성을 개선한 MCM-D 기판공정을 개발하였고, 이를 system-on-package(SOP)-D개념의 system 구현에 적용하고자 하였다. 이 과정에서 밀리미터파 대역에 적용될 수 있는 필터를 설계하고 구현하여 그 특성을 관찰하였다. 두 가지 형태의 필터를 구현하였는데 첫 번째는 공진기간의 커플링을 이용한 구조로서 2층의 금속층과 3층의 유전체(BCB)를 이용하였다. 구현된 필터 특성은 중심주파수 55 GHz에서의 삽입손실이 2.6 dB이고 군지연이 0.06 ns정도로 우수한 특성을 나타내었다. 또한 일반적으로 알려진coupled line 형태의 필터를 구현하였는데 삽입손실이 3 dB, 군지연이 0.1 ns정도의 특성을 나타내었다. 이렇게 내장형 필터를 포함한 MCM-D 기판은 MMIC를 flip-chip 방법으로 실장 할 수 있어서 집적화된 밀리미터파 대역 초소형 system 구현에 적용되어 우수한 특성을 나타낼 것으로 기대된다.