• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.47
• /
• pp.193-209
• /
• 1998

The objective of this paper is to present a methodology for design of the FMS by using a new modeling tool which is called SE&TPN(Safe Extended & Timed Petri Net). A FMS, which consists of various machine groups, may produce machine parts in different physical dimensions and lot size. The approach involves the SE&TPN modeling by Petri-nets. The proposed algorithm can handle determining of firing count vector by incidence matrix and adjustment of conflict using the marking of SE&TPN. The SE&TPN is defined as nets that can have at most one token in one place and can have elements such as permissive arcs and inhibitor arcs in addition to elements. The SE&TPN with permissive arcs and inhibitor arcs are intuitively direct approach to increase the modeling power of the SE&TPN. Finally, this paper is to develop a modulation to optimize the system problems of FMS using SE&TPN which describes exactly features of Petri Nets.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.127-137
• /
• 1999

This study is concerned with the loading problems in flexible manufacturing system(FMS). The loading problem in FMS is a complex one, when the number of machine and job is increased. It may be time-consuming and even impossible to achieve an optimal solution about this problem mathematically. Thus, a heuristic method is recommended in order to gain near-optimal solutions in a practically acceptable time. A new loading algorithm is developed with a multi-criterion objective of considering the workload unbalance, and maximizing the machine utilization, throughput for critical resources such as the number of tool slots and the number of working hours in a scheduling period and so on. The results of SAS analysis indicated that true average throughput of proposed heuristic loading statistically exceeds that of Shanker and Srinivasulus loading algorithm at the significance level of 0.1.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.209-219
• /
• 1999

This paper presents an efficient operational technique of material feeding process, trainning for multi-operations, machine conditions, and role of foreman and material-supplying man, for constructing the flexible assembly cells in the domestic electronic industries. And an practical method for computing the number of economical cells is also presented by the cost-effective model that compares the additional assembly machine requirement with the four reductive effects including WIP/finished goods inventory, the troubles in the assembly line, the opportunity loss for small order quantity, and amounts of production management due to the introduction of cell line. An case study is introduced in for a domestic electronic assembly line at the end.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.191-201
• /
• 1999

There have been a huge volume of researches concerning dispatching rules in job shop environments. Strangely, studies all but one pay no attention to multiple identical jobs due to the existence of production orders each of which calls for a fixed quantity, called an order size, of a specific part. Jobs arrive in the form of production orders in most, if not all, job shop type flexible manufacturing systems. This paper presents simple processing-time-based dispatching rules, and shows experimentally based on simulation that the rules with order-size considerations perform consistently well for tardiness and utilization measures. Several alternative strategies for rule specifications are examined.

• Annual Conference of KIPS
• /
• 2003.05a
• /
• pp.247-250
• /
• 2003

웹 기반 교육시스템에 컴포넌트 개념을 도입하여 재사용하는 연구는 소프트웨어 재사용 측면에서 생산성 증대에 기여한다. 이 논문에서는 웹 기반 교육시스템에 컴포넌트 개념을 도입하여 재사용성을 높이는 연구의 연장으로 컴포넌트를 인터넷상에 개방하면서 그 컴포넌트에 대한 검색을 하거나 컴포넌트를 이해하고자하는 사용자들에게 도움이 되는 정보들이 상세하게 기술되어야 함을 전제로 개발자의 WBI에서 요구 사항에 부합되는 컴포넌트를 검색하기 위한 컴포넌트 명세 모델과 아키텍쳐에 기반한 컴포넌트 검색 모델을 XML형태로 명세하고 클래스 다이어그램으로 표기하였다. 컴포넌트에 대한 표준명세서가 정의되지 않았기 때문에 본 시스템에서는 정의된 명세서 이외의 다양한 컴포넌트 명세서를 수용할 수 있는 유연성을 가진 검색 방법을 사용하였다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.54
• /
• pp.77-85
• /
• 2000

One form of job shop scheduling problem in contemporary automated manufacturing such as flexible manufacturing systems (FMS's) is presented which we call the FMS dispatching priority problem. The FMS dispatching priority problem seeks the best dispatching priority of parts and operations, and is essentially a combinatorial optimization problem. Because of the complicated mechanism of the system, the performance of a given dispatching priority must be evaluated via simulation. Simulated annealing have been applied to the problem, and it is found that appropriate parameter setting will be desirable to get good, if not the optimal, solutions within a limited amount of time under the presence of heavy computational burden due to simulation. More specifically, experiments reveal that initial temperature is the single most important factor among other parameters and factors, and that the appropriate initial temperature depends on the allowable computer time in such a way that the less time one can afford to spend, the lower the appropriate initial temperature should be.

• Annual Conference of KIPS
• /
• 2004.05a
• /
• pp.237-240
• /
• 2004

소프트웨어 개발에서 시스템 설계의 빈번한 변화와 그에 따른 프로그래밍의 어려움으로 인해 항상 시스템 설계와 구현 사이에 불일치하는 부분이 생기게 된다. 본 논문에서는 설계 모델을 영속적인 메타데이터로 저장하여 관리하며 추후에 설계의 변경이나 수정이 필요한 경우나 같은 영역의 시스템 개발 시에 적용할 수 있으며, 설계 모델로부터 코드를 생성하여 주는 도구의 개발을 통하여 설계와 구현사이의 불일치를 줄이고 소프트웨어 개발의 생산성과 유연성을 증대시킬 수 있는 방법을 제안하고자 한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.199-201
• /
• 2024

최근 병원에서는 빅데이터, 지능형 사물인터넷(AIoT) 등 인공지능 기반 기술들을 활용하여 환자 진료 및 치료 영역은 물론 의료산업 및 의료 시설 등과 관련된 다양한 영역에서의 활용방안을 모색하고 있다. 지능형 사물인터넷(AIoT, Internet of Things)은 AI와 IoT의 기술적인 결합으로 산업의 혁신을 가져와 국가 전체의 생산성을 높일 수 있을 뿐만 아니라 삶의 질의 변화는 물론 병원의 의료 환경에 있어서도 많은 파급 효과를 가져다 줄 것으로 예상하고 있다. 본 논문에서는 병원의 효율적인 공간관리를 위한 AIoT 기반의 가변 스마트 진료실 예약 시스템에 대한 설계 및 구현을 통하여 병원의 주요 자산인 공간이라는 개념을 효율적으로 이용하고 병원 내 소통과 협업을 위한 유연한 진료 환경을 제공함으로서 병원의 규모와 진료 전문성에 맞추어진 가변적 공간 기능을 통해 병원의 경쟁력을 높이는 것을 그 목적으로 하고 있다.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.133-142
• /
• 2008

AGV systems are widely used to increase the flexibility and the efficiency of the material handling systems. AGV systems are one of critical factors which determine the overall performance of the manufacturing systems. To this end, the optimal design for AGV systems is essential. Commercial simulation software is often used as an analysis tool during the design of AGV systems, however a series of procedures are desirable to simplify the analysis processes. In this paper, we present and develop the architecture for unidirectional AGV systems simulator which is able to consider approximate optimal unidirectional flow path and various operational parameters. The designed AGV systems simulator is based on JAVA, and it is developed to support designing approximate optimal unidirectional network by using Tabu search method. In addition, it enables users to design and evaluate AGV systems and to analyze alternative solutions easily. Simulation engine is consists of layout designer, AGV operation plan designer, and integrated AGVS layout designer. Users enter their system design/operation information into input window, then the entered information is automatically utilized for modeling and simulating AGV systems in simulation engine. By this series of procedures, users can get the feed back quickly.

• Journal of Adhesion and Interface
• /
• v.12 no.3
• /
• pp.99-104
• /
• 2011

Currently, automotive pre-primed coatings has been developed to overcome environmental regulations and to reduce manufacturing cost in automotive industry. By these reasons, an automotive pre-primed system has been investigated to remove the wash and pre-treatment process using a roll coating application. It is required to develop non-weldable pre-primed system for automotive structural adhesives, because pre-primed sheet coated with organic compounds is hard to be assembled by welding process. Primer 1 (polyester type) and primer 2 (urethane type) were designed to satisfy flexibility and formability for non-weldable pre-primed system. According to the results of physical property test of the primers, adhesion test such as single-lap shear test and T-peel test, primer 1 (polyester type) had better physical properties such as pencil hardness, solvent resistance, flexibility and adhesion with automotive adhesive than that of primer 2 (polyurethane type). In addition, the possibility of the non-weldable pre-primed system was applicable to automotive assembly process in place of welding process.