• Journal of Drive and Control
• /
• v.18 no.4
• /
• pp.98-103
• /
• 2021

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.73-80
• /
• 2019

In this paper, the basic design of the electric hydraulic sliding deck system was developed to develop the electric hydraulic sliding deck which can easily upgrade the loading and unloading of the agricultural machinery by modifying the load of the existing 5ton cargo truck. Through the kinematic analysis, The length and structure of the specimens were designed and the materials were selected for safety and economical efficiency through structural analysis. For the basic design of the sliding deck system, we surveyed the agricultural machinery to be transported and selected necessary elements. And have devised a system using a hydraulic cylinder that can meet selected factors. Through the simplified modeling and kinematic diagram, the operating structure of the sliding deck system was grasped and the minimum length and structure of the sliding deck were devised, In order to select the sliding deck material satisfying, four representative materials used in the automobile structure were selected. Selected the parts to be analyzed and compared the stresses and deformation amounts according to the material under the conditions of maximum load through simplified modeling. As a result, SS41P material was used to reduce the unit cost and to achieve safety. The winch system was designed and applied for moving up and down of the farm machinery which can not be operated.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.211-216
• /
• 2015

Large hydraulic excavator weighted 90 tons used the several pumps installed in parallel to use the hydraulic pump driving gearbox to improve fuel consumption by improving the energy efficiency of the hydraulic system. Gearbox connected to hydraulic pump supply the mechanical output to the high pressure and low pressure pump to be supplied by torque and rotation, which are the mechanical power, through a input shaft connected to large size engine of the excavator. So, gearbox connected to hydraulic pump is same as main artery in the human body and is required long life because it operates the hydraulic pump continuously during operating the engine. This study had used oil contamination analysis method to check the wear characteristics of the gearbox and frequency response characteristic analysis method to check the failure of the teeth failures of gearbox, while the test equipment adopted by the electrical feedback method to reduce the energy consumption was operating for the life assessment, in which the required power was 600 kW input power.

• Journal of the KSME
• /
• v.33 no.1
• /
• pp.22-32
• /
• 1993

본드선도는 물리적 등가가 적용되는 모든 상사 시스템을 대단히 조직이며 일관성 있게 모델링할 수있을 뿐만 아니라 시스템의 동적 방정식을 제어동역학 관점에 유리한 상태방정식으로 직접 유도할 수 있다. 또한 본드선도는 모델링 단계에서 무시된 각 요소들의 동적 특성 즉, 기계시스 템에서 회전축의 탄성처짐이나 운동 물체들 사이의 마찰 효과 전기 . 자기시스템에서 자속유출량, 그리고 유체 . 유압시스템에서 밀봉부분의 유량손실이나 압축성 유체 특성 등을 기곤에 구성된 본드선도의 변경 없이 각 특성들이 나타나는 본드상에 적절한 접합요소와 함께 단순히 첨가하여 고려할 수 있기 때문에 모델링 과정을 다시 반복하지 않고도 무시된 동적 특성들이 전체시스템에 미치는 영향을 파악할 수 있다. 특히 본드선도가 에너지 변환 장치나 에너지 유동 메카니즘이 복잡한 다에너지역 시스템 등에 거동이 전체시스템에 미치는 효과를 시각적으로 보다 세밀히 파악할 수 있을 뿐만 아니라 구성된 본드선도에 인과관계를 할당하여 본드선도의 접합요소를 통하여 유도된 최종적인 동적 방정식이 현실적으로 실현 가능한 물리시스템인지 파악할 수 있어 본드선도 모델링 단계에서 시스템을 묘사하는 동적 방정식의 옳고 그름을 평가할 수 있다. 이와 같이 본드선도는 기계, 전기 . 자기, 유체 . 유압, 열 시스템 및 이들이 조합된 복잡한 다에너지역 시스템 등을 효과적으로 모데링할 수 있는 매우 유용한 동적 시스템 모델링 방법이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.581-584
• /
• 1995

The frequency response of a electro-hydraulic servo(EHS) system is studied. The frequensy response characteristics of the EHS system obtained by linerization method, nonlinerar simulation method, and experimentation are compared ane another. It is found that the frequency response of the EHS is consistent when input signal applied is very small, but that is deviated as input signal becomes large.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.441-443
• /
• 2010

본 논문은 거대 동물에 적용 가능한 유압 기반의 목 메커니즘 설계 및 제작에 관한 내용으로서 향후 애니메트로닉스 응용 분야에 활용될 것이다.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.9
• /
• pp.70-76
• /
• 2003

In this study, the hydraulic breaker system was analyzed and simulated using. The simulation result was certified comparing with the experimental result. From the parametric analysis, the effects of each factor were revealed. Through the simulation with varying parameters, the method to reduce the return line pressure fluctuation was presented.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.44-48
• /
• 2010

Hydraulic cylinder is one of many part on the hydraulic excavator working. Cushion has the important function of protecting cylinder against the shock when the piston comes at end position. Also, the cushion of cylinder has a great effect on the operator's comfortable. In this study, we have done a comparative analysis through computer simulation and experimental value on pressure that occurs on a cylinder moving excavator.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.164-170
• /
• 2007

In this paper, the development results of electromechanical TVC actuation system is described in the aspect of design, analysis, manufacturing and test. The kinds of prime power for TVC actuation system is classified by the variety of propulsion system of launch vehicle. The electric power by battery is the sole candidate for prime power of TVC actuation system at the view point of feasible domestic infra technologies for the present. The characteristic analysis study is performed between electromechanical and electrohydraulic actuation system with respect to power efficiency, performance and weight efficiency. The electromechanical actuation system has superiority of power and weight efficiency according to less opportunity of power conversion process.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1075-1080
• /
• 2007

In order to reduce energy consumption, secondary controlled system has been applied to many types of equipments. In lifting equipments or press machines using hydraulic cylinder, a hydraulic transformer is used as a control component instead of a valve for motion control and a component for recovering potential energy of load. The transformer is a combination of a variable displacement pump/motor as a secondary controlled element and a fixed displacement pump/motor. In this paper the effect of transformer is studied. Multiple closed loop controllers with displacement feedback of variable pump/motor, speed feedback and position feedback of cylinder are used. The efficiency and energy consumption when cylinder is driven up and down is calculated by simulation. Simulation results show that considerable energy saving is achieved by choosing load ratio, circuit type and supply pressure.