• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.276-281
• /
• 1989

Comparison 3-port servo system with 4-port is made to obtain optimal design for heavy and unidirectional hydraulic system, It is concluded that 3-port servo system it more adequate than 4-port for the heavy load system which is usually operated at lower frequencies. High performance electro-hydraulic position controller is designed using 3-port servo valve. It includes dynamic pressure feedback as a inner loop and position feedback as a outer loop.

• 한국정밀공학회지
• /
• 제18권3호
• /
• pp.90-98
• /
• 2001

In this paper, the development of exclusive control valve for improving the performance of truck cab tilting system is discussed. Cab tilting system is implemented to the heavy truck for the convenience of driver. However when tilting up or down, sudden swing of cab has brought discredit on user. To improve this phenomena it is inevitable to use counter balance valve. But because of high pressure and low flow characteristic, general counter balance valve is unsuitable to cab tilting system. Therefore, this paper presents the developments of exclusive return pressure control valve which prevents sudden swing of cab and verify the validity of design through the computer simulation.

• 유공압시스템학회논문집
• /
• 제1권4호
• /
• pp.15-21
• /
• 2004

High speed on-off electro-magnetic valves have been used for pressure control or flow control in automotive or construction machine servomechanisms. These systems require quicker valve switching speed to improve control preciseness. The authors designed and manufactured an electric valve driver with quick response characteristics by using 3 power source type valve driver concept. In experiments by using a hydraulic system incorporating the new valve driver, the new driver shortened the switching lag time from 5 ms to 1.3 ms. And also the new driver showed excellent position tracking control performances.

• 유공압시스템학회논문집
• /
• 제1권4호
• /
• pp.1-8
• /
• 2004

The optimum design parameters of several hydraulic systems are obtained using the complex method that is one kind of constrained direct search method. First, the parameters of lead-lag controller of the direct drive servovalve is designed using the complex method to satisfy the steady-state error requirement. Second, the optimum locating point of hydraulic cylinder Is determined to minimize the cylinder force in the operation range of rotational sluice gate. For the third application case, the optimum piston area of hydraulic cylinder is determined to minimize the man power to elevate the manually operated sluice gate.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.167-174
• /
• 1997

In this paper, the mathematical model of the hydraulic control valve is formulated, that is, this dynamic modeling which includes the motion equations and continuity equations can analyze the dynamic characteristics of the hydraulic control valve. The control valve for the transmission has the Over Speed Protection to protect a hydraulic travel motor. Therefore, this simulation shows the over speed protection and researches the main design parameters. The results of the computer simulation were assured through the experiment. From the comparison between both results, it is shown that this simulation program is useful and effective.

• 한국항공우주학회지
• /
• 제45권4호
• /
• pp.349-357
• /
• 2017

최근 전술유도무기 분야는 대부분 전기식 구동장치를 채용하고 있으나 주어진 공간조건과 무게 제한 아래 상대적으로 부하가 크며 작동시간이 짧고 동시에 빠른 응답성이 요구될 경우에는 무게 및 공간 조건을 맞추기 위해서 반드시 유압식 구동장치를 적용해야 할 경우가 발생한다. 본 논문에서는 소형 유압식 구동장치 시스템을 대상으로 수학적 모델링과 시뮬레이션을 수행하였다. 수학적 모델은 고압용기, 압력조절밸브, 저유기, 유압작동기로 나누어 구성하였으며 실험 결과와 비교하여 모델의 타당성을 검증하고 고찰하였다. 본 연구를 통하여 소형 유압식 구동장치 시스템 설계에 유용한 수학적 모델을 수립하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제15권1호
• /
• pp.16-27
• /
• 2018

Hydraulic torque load simulator is essential to test and qualify the performance of various angle control systems. Typically a flapper-type second stage servovalve is applied to the load simulator, but here the direct drive servovalve, which is a kind of one-stage valve and affected by the large flow force, is applied. Since the torque load is applied not to the stationary shaft but to the rotating shaft of the angle control system, the controlled torque of load simulator is not accurate due to the rotating speed of the angle control system. A feedforward compensator is designed and applied to minimize the disturbance-like effect. A mathematical model is derived and linearized to analyze the stability, accuracy and responsiveness of the torque load simulator. The parameter effects of a controller, servovalve, hydraulic motor, rotating spring shaft are analyzed and summarized. The goodness of the linear analysis is verified by the digital computer simulations using both the linear and nonlinear mathematical models.

• 유공압시스템학회논문집
• /
• 제1권2호
• /
• pp.8-14
• /
• 2004

Abstract: In the oil hydraulic piston pumps the clearance between the valve plate and cylinder block plays an important role for volumetric and overall efficiency. Thus, adequate lubricational fluid film is needed for the interface. In this study, fluid film thickness is measured by a gap sensor and a slip ring under operational conditions to observe the behavior of the lubrication mechanism in detail. To investigate the effect according to the valve plate types in view of the fluid film, three different types were designed. Leakage flow rate and shaft torque were also measured to clarify the effect according to the valve plate types. A broad range of experiments were conducted to provide reasonable data on the effect of fluid film. In this experiments two main parameters were found, of which the one is the discharge pressure and the other is valve plate geometry. As a result, we found that the spherical valve plate could get more stable fluid film thickness, maintain good efficiency for high pressure range than the other types.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.565-568
• /
• 1995

This paper presents the position control of a closed-loop cylinder system using ER(electro-rheological)valve actuators. Following the field-dependent pressure analysis of the ER valve actuators on the basis of Bingham model of ER fluids, a 3 d.o.f. close-loop sylinder system having the heave, roll and pitch motions is proposed. The governing equations of motion are derived using Lagrange's equation, and a control model is established by considering system uncertain parameters such as load conditions. A sliding mode controller which has inherent robustness to system uncertainties is adopted to achieve robust tracking control performance. Tracking control results for sinusoidal trajectory were presented in order to demonstrate the effectiveness of the proposed control system.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1282-1289
• /
• 1988

본 연구에서는 형태와 특성이 다른 솔레노이드 밸브를 사용한 위치제어 시스 템에 위에서 언급한 두가지 단속적 제어 방법을 적용하여 이들 밸브의 형태와 특성이 시스템의 응답특성에 미치는 영향을 실험적으로 규명하고 실린더 내의 압력 변화에 미 치는 영향도 조사하였다.