• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.78-81
• /
• 1995

본 연구에서는 슬라이딩 모드를 전기유압식 심실보조기의 직류모터제어기의 속도와 위치제어에 적용하였다. 슬라이딩 모드 컨트롤은 가변구조시스템(varaiable sturucture system)의 일종으로 적절한 내부스위칭 논리를 갖는 연속적인 부시스템(subsystem)의 모임으로 구성된다는 접에서 고정된 제어구조를 갖는 일반적인 제어시스템과 다르다. 이 시스템은 불연속적인 동적시스템이나 시변적인 요소를 갖는 시스템등에서 사용되고 있다. 이 논문에서는 슬라이딩 모드 제어를 적용하여 좌심실보조기를 제어하는 경우에 넓은 작동범위에서도 시스템이 안정적이며 혈류역학적인 외란에 대해서도 기준입력에 대한 속도의 추종이 잘 이루어지는지의 여부를 실제의 구현에 앞서 컴퓨터모델을 통해 검증하고 문제점들을 조사하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.1062-1070
• /
• 1995

The study deals with controlling the velocity of hydraulic motor with PI controller through the control of displacement pump which has higher efficiency than valve-controlled system. This was done as follows. First, we modified original displacement pump and designed this electrohydraulic puma system. Second, after experimenting static and dynamic characteristics, we identified system parameter of approximated model. Lastly, to control the velocity of hydraulic motor we controlled the angle of the swash plate of displacement pump. Test carried out in the laboratory shows that transient and steady state response could be improved by PI controller reducing power loss.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.3
• /
• pp.171-178
• /
• 2008

Pressure control of hydraulic pump using SRM with pressure predictor and direct torque control method is presented in this paper. Nowadays, high efficiency and high performance motor drive is much interested in hydraulic pump system. But the hydraulic pump system has an inherent defect that its dynamic behavior causes by interaction between the sensor and hydraulic load. It will make low performance of whole system, even unstable and oscillatory. Proposed system integrates pressure predictor and direct instantaneous torque control (DITC). The pressure predictor includes Smith predictor, which is easy to improve unstable or long oscillation in traditional negative feedback control and popular PID control architectures. And DITC method can reduce inherent torque ripple of SRM, and develop smooth torque to load, which can increase stability and improve the torque response of SR drive. So high dynamic performance and stabilization can achieved proposed hydraulic system. At last, the proposed hydraulic system is verified by simulation and experimental results.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.148-154
• /
• 2000

In this study, the static and the dynamic characteristics of the load-sensitive hydraulic pump control systems of a hydraulic excavator were analyzed using the developed analysis tool. The results were compared with the experimental ones. To improve the static performance of the system, the system parameter effects on the controllable region and the pump pressure variation were studied. The parameters enhancing dynamic characteristics were also considered.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.292-301
• /
• 2014

This paper describes development of distributed type independent electro-hydraulic ballast valve remote control system with diagnostic function based on fuzzy inference using redundant Modbus communication and ethernet Modbus TCP/IP. Diagnostic function estimate degradation of system components and diagnose system faults, which results in shortage of fault maintenance time and improvement of system safety. Slave devices which control each valve and master device which command, monitor and diagnose slave system are developed. Slave devices are connected to master device with redundant Modbus networks and master device is connected to ship's integrated control system with Modbus TCP/IP. Also this paper describes development of simulator to test and confirm whether developed system can be integrated with ship's integrated control and monitoring system.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.25-33
• /
• 1997

This study deals with controlling the velocity of Electr-Hydraulic servo system through the non-stan-dard PIC control. This was done as follows. First, we modeled nonlinearised model and linearised model, second designed analytic program for electro-hydraulic servo system velocity control Lastly, to im- prove dynamic characteristics of system we designed non-standard PID contoller and verifed throughth experi- ment and MATLAB program, commercial used software.

• Journal of Aerospace System Engineering
• /
• v.11 no.3
• /
• pp.8-15
• /
• 2017

In this paper, an equivalent brake hydraulic circuit with a piezoelectric hydraulic pump was constructed, and load pressure control for better pressurization/depressurization characteristics was conducted. To understand pressurization/depressurization characteristics of the equivalent hydraulic circuit, the relation between the load pressure and the input voltage was revealed experimentally. Experiments were also conducted to observe effect of the solenoid valve on depressurization characteristics. In the pressurization experiment, it was validated that transient response time required to achieve desired load pressure may be reduced through voltage control to change pressurization gradient. By applying the valve on/off time control and voltage control, it was also possible to reduce response time in the depressurization process. Therefore, transient response time may be improved within 10ms for pressurization and within 30 ms for depressurization using the control technique suggested in this study. The load pressure control method proposed in this study is useful for controlling load pressure of a hydraulic brake system with the piezoelectric hydraulic pump.

• Journal of KSNVE
• /
• v.11 no.1
• /
• pp.96-103
• /
• 2001

Past research has repeatedly demonstrated the fact that hydraulic semiactive systems, if operated Properly, can provide levels of control authority in structural vibration control systems that are comparable to a fully active hydraulic damper. The performance of the semiactive system when used to provide vibration mitigation for a laboratory test structure is described in this paper Numerical and experimental verification of the effectiveness of the proposed bistate controller which relies on a Lyapunov approach that seeks to dissipate the energy of the system is also presented. The results based on the bistate control are compared with those of two different control strategies. The work indicates that hydraulic semiactive actuator provides a reliable, and inexpensive means of achieving structural control.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.174-178
• /
• 2001

선박내의 발전장치로는 독립된 디젤기관으로 구동되는 발전장치를 사용하는 것이 일반적이자만, 근래에는 에너지 절약과 관리, 보수의 편의를 목적으로 축발전(Shaft Generator) 시스템이 연구, 개발되고 있다. 본 연구에서는 비교적 가격이 저렴하고, 설치 공간이 적으면서고 양질의 교류전력을 얻을 수 있어 소형선박에서 사용하기에 적합한 축발전 시스템으로, 마이크로컴퓨터에 의하여 제어되는 유압구동식 축발전시스템을 제안하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.221-230
• /
• 1988

In the microcomputer-based velocity control for an electro-hydraulic servo system, the effects of control methods and control hardware on the performance of the system were investigated. Experiments were carried out with PID and deadbeat controllers using 8 or 16 bit microprocessor and 8 or 12 bit A/D and D/A converters. It is found that the transient response of the system is better with PID controller than with deadbeat controller. When the number of bits of the microprocessor and converters are small, it is also found that amplitude quantization due to limited word-length gives significant effects on transient responses of the system. Analytically predicted step responses are in good agreement with experimental ones.