• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.6-6
• /
• 2017

농용트랙터의 전방차축 현가장치는 노면으로부터 발생하는 진동의 영향을 줄일 수 있기 때문에 트랙터의 대형화, 고속화의 추세에 맞춰서 승차감과 조향감을 향상시키는 데 중요한 역할을 한다. 전방차축의 현가장치는 트랙터의 차체 무게에 의한 부하가 크고, 또한 유압 펌프를 비롯한 유압시스템이 존재하기 때문에 유압식 회로로 구성하는 것이 바람직하다. 하지만, 현가장치의 유압회로를 개발하는데 있어서 실제 시스템을 구성하여 실제 실험을 통한 개발에는 비용과 시간이 많이 필요하다. 본 연구에서는 유압식 전방차축 현가장치에 필요한 유압회로부 개발을 위하여 시뮬레이션 기법과 요인시험 장치를 이용 적정 유압회로를 설계하고자 하였다. 이를 위하여 어큐뮬레이터, 가변 오리피스, 릴리프밸브, 체크밸브 등으로 구성된 유압 현가요인 시험 장치를 설계 제작하였으며, 현가 부품인 실린더 행정, 속도, 전달되는 힘을 측정하고, 유압 해석 프로그램인 SimulationX를 이용 구성된 유압회로 부품에 측정값을 입력하여 실제 조건과 유사한 동특성을 나타내는 전방차축 현가요인 시뮬레이션 모델을 개발하였다. 개발된 시뮬레이션 모델을 이용하여 실제 시험조건과 같은 가진 조건을 부여하여 개발 현가장치의 특성 값 변동에 따른 현가 성능을 구명하였다. 이를 위해 시뮬레이션 상에서 120 마력 트랙터 무게의 50% 수준에 해당하는 2,000 kg의 부하가 존재하는 상태에서 현가장치의 유/무에 따른, 감쇠 계수의 변화에 따른 스프링상 질량의 RMS 가속도를 비교하였다. 입력 가진으로는 1 Hz, 4 Hz, 8 Hz의 진동수에 각각 10 mm, 6.4 mm, 3.2 mm의 진폭을 인가하였다. 시뮬레이션 결과, 1 Hz에서는 현가장치가 있는 경우 최대 55.9% 개선되었고, 4 Hz에서는 최대 3.9 % 개선되었고, 8 Hz에서는 최대 61.4%까지 개선되었다. 이는 4 Hz의 경우에는 2,000 kg의 부하에 해당하는 고유 진동수 대역에 해당하기 때문에 그 감쇠 효과가 없는 것으로 나타났다. 하지만, 다른 주파수 대역에서는 현가장치가 효과적으로 작동하는 것을 나타내었다. 설계한 전방차축 현가 유압회로부를 시뮬레이션을 통하여 분석한 결과, RMS 가속도의 개선이 명확하게 이루어지는 것을 확인하였으며 입력 주파수 변화에 따라 감쇠특성도 나타나는 것을 확인하였다. 추후 연구에는 설계한 유압회로부와 관련 부품을 설계 제작하여 실제 트랙터에 장착 그 성능을 검증할 예정이며, 노면조건에 따라 감쇠성능을 유지하기 위한 반능동형 또는 적응형 현가장치 제어 기술을 적용하여 개선된 현가성능을 확보하기 위한 연구를 수행할 예정이다.

• ICROS
• /
• v.5 no.1
• /
• pp.35-40
• /
• 1999

• 기계와재료
• /
• v.11 no.2 s.40
• /
• pp.22-29
• /
• 1999

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.3
• /
• pp.306-326
• /
• 1992

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.947-952
• /
• 2010

Components such as pressure vessel, hydraulic hose assembly, accumulator, hydraulic cylinder, hydraulic valve, pipe, etc., are tested under the impulse-pressure conditions prescribed in ISO and SAE standards. The impulse pressure test machine needs to have a high pressure, a precise control system and a long life. It should satisfy the requirements for fabrication of the impulse tester to generate ultra high pressure in the hydraulic system. In the impulse tester, a servo-valve control system is adopted; although the control application is convenient, it is expensive owing to the cost of developing the system. The type of the control system determines the pressure wave, which affects the components that are tested. In this study, the manufacturing process and the intensifier system design related to the flow, pressure, and the increasing rate of pressure are investigated. The results indicate the ultra high pressure waves in the system.

• Journal of the Korea Convergence Society
• /
• v.8 no.10
• /
• pp.193-199
• /
• 2017

Mechanical tappet is used to reduce the cost and friction loss compared with hydraulic tappet. But the mechanical tappet doesn't have the ability to control the clearance between cams and valves and is selected by measuring the distance between valves and cams in order to minimize the clearance of valves by considering thermal expansion of valves. So, the valve clearance is nearly zero after fully warming-up periods, but there is valve clearance before warming-up. Especially at cold condition, the clearance is relatively large and can bring about some problems. In this study, the valve motions like lift, velocity, seating velocity and bouncing height were studied at various valve clearance conditions by experiment and analysis. As the valve clearance increases, the ramp area becomes shorten and it causes the valve train motion to have bad effects.

• Journal of Drive and Control
• /
• v.13 no.2
• /
• pp.26-33
• /
• 2016

This paper describes of a mathematical and real experimental analysis for a walking robot which uses servo valve driven hydraulic actuator. Recently, many researchers are developing a walking robot based on hydraulic systems for the difficult and dangerous missions such as walking in the rough terrain and carrying a heavy load. In order to design and control a walking robot, the characteristics of the hydraulic actuators in the joint through the view point of walking such as controllability and backdrivability must be analyzed. A general mathematical model was used for analysis and proceeds to position and pressure changes characteristic of the input and backdrivability experiment. The result shows the actuator is a velocity source, had a high impedance, the output stiffness is high in contact with the rigid external force. So stand above the controller and instruments that complement the design characteristics can be seen the need to apply a hydraulic actuator in walking robot.

• Journal of Drive and Control
• /
• v.18 no.3
• /
• pp.8-15
• /
• 2021

A rear axle steering (RAS) system is attached to the rear of medium and large commercial vehicles that transport large cargo. The existing RAS systems are driven by electro-hydraulic actuator (EHA), and most commercialized EHAs consist of electric motors, hydraulic pumps, relief valves, prefill valves and cylinders. The prefill valve required for such EHAs is a type of check valve with extremely low cracking pressure that should not allow RAS to have noise or vibration, and the prefill valve prevents system negative pressure as well as unstable operation. Most papers on this topic rely on experiments to predict valve performance, and theoretically detailed modeling of valves or pipelines is performed, but it is very rare to evaluate hydraulic vibration characteristics by analysing everything from hydraulic pumps to valves comprehensively. In this study, we proposed an experimental circuit that can predict the performance of the prefill valve. The study also analysed the pressure-flow pulsation that is transmitted to the valve through the pipeline, and how the transmitted pressure-flow pulsation affects the valve vibration.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.157-160
• /
• 2004

In this paper, a performance characteristic pump and motor is investigated. The hydraulic pump and motor are axial piston type with swash plate. Proportional control valve which can control that plate is an important component for its performance characteristics. We will show the control characteristics for them Experiment results show that behavior can be shown with changing the various parameters.

• Tribology and Lubricants
• /
• v.29 no.5
• /
• pp.291-297
• /
• 2013

Hydraulic directional control valves actuated by solenoid are used to control emergency steering in general or hybrid electric commercial vehicles. In this study, a new lightweight hydraulic directional control valve was designed by flow and structural simulation, and was fabricated; the basic operation, pressure differentials, and inner leakage flow were evaluated experimentally. In the results, the new model showed comparable performance with an existing imported valve. New valve was 80% the weight of the existing valve and had few components. Installing this valve on a truck body is easier because of its compactness and small size.