• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.643-646
• /
• 1997

Gear trains are used in many machinery for variable speed ratios. Typical shapes of gear trains are tivo categories : simple gear trains and planetary gear trains. This paper presents the kinematic ctraracteristics for planetary gear trains. The characteristics are the constraints of geometric relationships, number of gears, speed of each gear. and speed ratio of the train. The objective goal of this paper provides the CAI) software, which is the academic tool for understanding the kinematics of the planetary gear trains.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.108-116
• /
• 2005

Transplanting accuracy of a rice transplanter mainly depends on the trajectory of the hoe for picking, conveying and transplanting of seedlings as well as the return motion. The trajectory can be decided and prescribed to be suitable in treating seedlings fur a prevailing soil condition. For the purpose of the transplanting accuracy, the design of a transplanting mechanism would be carried out using a planetary-gear-train system instead of the four bar linkage system. In this study, a design method of transplanting mechanism is theoretically proposed by synthesizing a noncircular planetary-gear-train system fur the tool (hoe) to trace a prescribed trajectory. The method utilizes an optimization approach to decide the lengths of an arm and a tool, the inverse kinematics to figure out the configuration angles of the two links, the roll contact condition in transmitting motion between the gears, and a linearization approach to obtain the shapes of the gears. Based on the proposed method, the shapes of the gears and the lengths of the tools of the planetary-gear-train system are determined fur three prescribed trajectories. A kinematical simulation with a commercialized package program is also carried out to confirm that the gear-train system synthesized with the proposed method is able to trace the prescribed trajectory.

• 대한기계학회논문집A
• /
• 제36권9호
• /
• pp.953-960
• /
• 2012

풍력발전기용 증속기의 유성기어열에서 한단 지지 캐리어에 유연 핀을 적용하여 유성 축과 유연 핀의 변형에 의한 자기 정렬 효과가 증속기 유성기어열의 수명에 미치는 영향에 대한 연구를 수행하였다. 유성기어열의 하중 분배 효과를 분석하기 위하여 오일러 이론과 상용 프로그램을 이용하였다. 풍력발전기용 증속기에 한단 지지 캐리어와 유연 핀이 사용됨에 따라 유성기어의 미스얼라인먼트, 치면 하중분포 계수 및 요구수명이 만족할 만한 성능 향상을 가져왔으며, 특히 요구수명에 있어서 증속기가 요구하는 20년 보증 수명을 만족하는 것으로 확인되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.387-390
• /
• 2007

The gearbox for wind turbine have been increased the size by the wind turbine is needed to produce bigger power. The optimal sizing for gearbox is demanded because of limited space on the nacelle. The volume and weight for the gearbox are influenced especially for size of it. Therefore, the purpose of this study investigates the design characteristics considering types of gear train structure for optimizing the volume and weight of the gearbox.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.206-212
• /
• 1999

In this paper, the transmission error of a atar type Epicyclic Gear Train (EGT) has been studied. Dynamic analysis has been executes calculate the rotation angle of the input and output shafts at various loads. Transmission Error of EGT has been measured to compare with the analysis results. There are qualitative similarity between the experimental and analytical results.

• 기계저널
• /
• 제27권2호
• /
• pp.99-108
• /
• 1987

국내에서 개발중인 인공심장으로는 서울대학교 공과대학 기계설계학과와 서울대학교병원 의공학과에서 공동으로 개발중인 전기-기계식 인공심장이 있다. 모우터가 내장된 실린더가 모우터의 정.역전에 따라 통 안에서 좌.우로 움직이면서 좌.우심실을 교대로 압축한다. 모우터가 들어 있는 실린더의 위치가 통 안에서 고정되어 있지 않고 움직이므로, 한쪽 심실이 팽창할 때 실린더가 다른 한쪽 심실 공간을 차지하여 결국 전체 체적은 하나의 심실 공간과 모우터 공간만 있으면 되므로 모우터의 위치가 고정된 형식에 비해 체적 감소가 가능하다. 에너지 변환기를 구성하는 기계요소로는 2단의 유성기어열과 랙(rack)뿐으로서 비교적 구조가 간단하여 고장의 가능성이 낮다. 따라서 기존 모델들이 지니고 있는 단점들이 거의 극복 되었다. 현재 모의 순환실험에 성공하고 동물 실험을 준비 하고 있다.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2619-2627
• /
• 2000

In this paper, the vibrational characteristics of a foot mount type gearbox for epicyclic gear train have been studied. The modal parameters and mode shapes of a gearbox have been computed using AN SYS code. Modal testing was carried out to verify the FEM analysis model. It has been shown that the analysis results are in good agreements with the experimental results. Harmonic analysis has been executed to verify the effect of thickness variance of gearbox housing on the modal response. Analyzing the calculated results, some guides for optimal vibration response has been deduced.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.837-842
• /
• 2000

In this Paper, the vibrational characteristics of a gearbox for epicyclic Rear train have been studied The modal parameters and mode shapes of a gearbox have been computed using ANSYS code. Modal testing was carried out to verity the FEM analysis model. It has been shown that the analysis results are m good agreements with the experimental results. Harmonic analysis has been executed to verify the effect of thickness variance of gearbox housing on the modal response. Analyzing the calculated results, some guides fer optimal vibration response has been deduced.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1775-1780
• /
• 2003

A hybrid finite element analysis was used to analyze the influence of ring gear rim thickness and spline number on the static properties of an epicyclic gear system with manufacturing errors. Both of these parameters affected the bearing force and critical stress. The effect of changes in the rim thickness on the load sharing between the gears depended on the type of manufacturing error. Ring flexibility improved the load sharing between planetary gears only in systems with planet tooth thickness or planet tangential errors; for other types of error, ring flexibility worsened the load sharing. To improve load sharing, rim thickness and spline number should be controlled within a specific range. The effect of the ring gear boundary condition was more apparent in a system with errors than in a normal system.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.491-498
• /
• 2003

In this paper, dynamic characteristics of an epicyclic gear train considering Coriolis effect have been studied. High speed transmissions such as in an aircraft engines will be strongly influenced by Coriolis effect. Gear meshes were modelled as springs and dampers with periodically varying mechanical constants with time. The loci of planet gear, sun gear. and carrier were analyzed. Maximum values of mesh forces between sun gear and planet gear(S/P) as well as between planet gear and ring gear(P/R) have been simulated as function of rotating speed.