• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.114.1-114.1
• /
• 2005

• The Korean Journal of Rheology
• /
• v.3 no.2
• /
• pp.117-123
• /
• 1991

현탁액에 대한 기본적인 유변학적 특성을 조사하기 위해 입자의 부피분율에 따른 점도의 변화를 측정하였고 현탁액의 Die Swell 현상에 대해 실험적으로 규명하였다. 뉴톤성 특성을 조사하기 위해 입자의 부피 분율에 따른 점도의 변화를 측정하였고 현탁액의 Die Swell 현상에 대해 실험적으로 규명하였다. 뉴톤성 특성을 갖는 Silicone 오일을 현탁 매질 로 사용하였고 미세한 유리 구슬이 filler로써 사용되었다. 현탁액의 점도는 Couette 점도계 와 모세관 점도계를 사용하였다. 관의 입구와 출구에 대한 보정을 위해서 Bagley의 방법을 이용하였으며 중력으로 인한 Swell의 감소효과를 제거하기 위해서 분사 유체와 유사한 밀 도를 지니며 분사 유체와 섞이지 않는 유체를 담은 부력용기가 사용되었다. Die Swell 현상 은 사진을 찍고 이를 정밀한 확대경을 통해 관찰함으로써 수치적으로 값을 얻었다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.4
• /
• pp.377-385
• /
• 2007

Drivers passing through a tunnel fare some difficulties caused by the visual differences between outside and inside of the tunnel. The blackhole phenomenon at a tunnel entrance lone severely decreases the driver's visibility during the daytime. A counterbeam lighting is generally recommended for the prevention of it. This paper simulates an entrance zone with a blackhole phenomenon to verify the effect of counterbeam lighting. Even though the tunnel lighting is important, It Is not easy to consider many lighting alternatives at the stage of tunnel design due to the complexity of tunnel renditions. This paper is expected to contribute improving the visibility in tunnels, especially at the entrance zone.

• The Journal of Engineering Geology
• /
• v.20 no.2
• /
• pp.147-153
• /
• 2010

Cut-off wall with a low permeability can be constructed to prevent groundwater seepage in spillway tunnel areas. Three spillway tunnels are constructed in Im-ha multipurpose dam region and three types of cut-off walls with a variety of directions and scales are designed. As a result of MODFLOW modeling to assess the effect of cut-off wall for three types, groundwater inflows to the tunnels range from 64.26 $m^3/day$ to 65.49 $m^3/day$ and also they through a cut-off wall section from a reservoir do from 44.08 $m^3/day$ to 45.31 $m^3/day$ and it does not show any significant difference among them. Therefore, a construction process and an environmental conservation rather than the effectiveness of cut-off wall need to be considered to select the best cut-off wall in this region.

• Journal of Korea Water Resources Association
• /
• v.46 no.12
• /
• pp.1157-1167
• /
• 2013

Sayeon dam is the one that is structured in 1965 and supplying residential water in Ulsan. The hill located within the reservoir near the entrance of the dam spillway plays a role as a natural Dike. According to the recent surveys on change of sediment and effective volume of water kept in store, the latter that decreased 2.92% from twenty million tons and the former increased just 1.65 m. In this survey we examined the application of SED-2D model using measured data of Sayeon dam sediment. In addition we surveyed the inflow control and the water depth to be kept when installing small hydraulic structure similar to Dike around the dam reservoir entrance. To do this, we simulated the hydraulic effects and sediment on the conditions eliminating the hill or installing the structure higher than it. The controlling effects of present hill or adding small hydraulic structure on it was found, though the changes of the measure was not large.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.4
• /
• pp.124-137
• /
• 2012

Climate analysis is important in urban planning for human comfort. Synoptic weather conditions can only resolve the 30% of local variance of wind conditions whereas 70% of the variance arise from local terrain, buildings, and other small scale thermal conditions. Climate Analysis Seoul (CAS) was developed to resolve such micro-scale climate. The Local-scale air temperature Deviation (LD) analysis map from CAS showed the co-existence of built-up and suburban areas in the study region (CR, Cold-air analysis Region) despite its small extent. Temperature, humidity, wind speed, and wind direction were monitored in CR. Hourly observed cooling rate agreed well with LD. Cold air production, transportation, and stagnation was visualized by the observed Vertical Temperature Gradient (VTG) along the small stream in CR. VTG observed at the upper-most stream can be divided into two components: radiative cooling and cold air inflow from outside. Radiative cooling exists regardless of the wind speed whereas cold air inflow occurs only with calm wind. From the regression analyses based on the wind speed, the inflow portion was determined as 84% of radiative cooling. Climate analysis in the future will be able to characterize the changes in cold air by urban development plan to support the human comfort.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.1
• /
• pp.9-18
• /
• 2013

Two-phase vapor-liquid flows exist in many shell and tube heat exchangers such as condensers, evaporators, and nuclear steam generators. To understand the fluid dynamic forces acting on a structure subjected to a two-phase flow, it is essential to obtain detailed information about the characteristics of a two-phase flow. The characteristics of a two-phase flow and the flow parameters were introduced, and then, an experiment was performed to evaluate the pressure loss in the tube bundles and the fluid-dynamic force acting on the cylinder owing to the pressure distribution. A two-phase flow was pre-mixed at the entrance of the test section, and the experiments were undertaken using a normal triangular array of cylinders subjected to a two-phase cross-flow. The pressure loss along the flow direction in the tube bundles was measured to calculate the two-phase friction multiplier, and the multiplier was compared with the analytical value. Furthermore, the circular distributions of the pressure on the cylinders were measured. Based on the distribution and the fundamental theory of two-phase flow, the effects of the void fraction and mass flux per unit area on the pressure coefficient and the drag coefficient were evaluated. The drag coefficient was calculated by integrating the measured pressure on the tube by a numerical method. It was found that for low mass fluxes, the measured two-phase friction multipliers agree well with the analytical results, and good agreement for the effect of the void fraction on the drag coefficients, as calculated by the measured pressure distributions, is shown qualitatively, as compared to the existing experimental results.