• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.613-620
• /
• 2004

Traditionally, simulation method was used to test and evaluate the performance of communication protocol or functional elements for mobile communication service. In this Paper, PCSsim(Personal Communication System Simulator) was realized that can evaluate and review the call process of mobile communication service or to predict its performance by using the object-oriented simulation platform. PCSsim can simulate the base station and mobile host by considering the user's mobility, call generation rate and call duration time. In this paper, based on the simulation, presented the simulation results of hand-off generation ratio according to call generation, user's moving speed and call duration time both in residence area and commercial area, and it was confirmed that the hand-off rates in simulation and actual service environment have similar features. PCSsim can be used in adjusting the characteristics of base station fellowing the dynamic hand-off buffering or the characteristics of user's call in the design stage, and also can be used in building new mobile communication network by reflecting the characteristics of region where the base station is located and the mobility of the user.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.4
• /
• pp.232-239
• /
• 2003

This paper discusses the design and implementation of a human-oriented interface based on computer vision that efficiently controls presentation slides. The user does not have to be confined to a keyboard or mouse any more, and can move around more freely because slides for presentation can be up and down using a general laser pointer that is used for presentation. Regions for virtual buttons are set on the slide so that the user can conveniently point the buttons using the laser pointer. We have proposed a simple and efficient method that computes the button areas in the image without complicated calibration. The proposed method has been implemented based on Microsoft PowerPoint ; moreover it can be applied to other PowerPoint-like presentation softwares. Our method for human-centered slide control enables the user to give audiences a more interactive presentation in a natural way.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.1
• /
• pp.70-79
• /
• 2013

In this work, a steady-state performance modeling and off-design performance analysis of the 2-spool separate-flow turbofan engine named (BR715-56) which is a power plant for the narrow body commercial aircraft is carried out for engine performance behaviors investigation and condition monitoring using a commercial code MATLAB/SIMULINK. Firstly, the engine component maps of fan, high pressure compressor, high pressure turbine and low pressure turbine are generated from similar component maps using the scaling method, and then the off-design performance simulation model is constructed by the mass flow matching and the work matching between components. The model is developed using SIMULINK, which has advantages of easy steady-stare and dynamic modelling and user friendly interface function. It is found that the off-design performance analysis results using the proposed model are well agreed with the performance analysis results by GASTURB at various operating conditions.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.92-95
• /
• 1999

본 논문에서는 음성에 의해 구동되는 이동천화를 구현하기 위한 기초 실험으로서, 이동전화상에서 많이 사용되는 단어 데이터를 직접 채록하여 단어 인식 실험을 수행하여 인식기의 성능을 평가하였다. 인식 실험에 사용된 단어 데이터베이스는 서울 화자 360명(남성화자 180명, 여성화자 180명), 41상도 화자 240명(남성화자 120명, 여성화자 120명)으로 구성된 600명의 발성을 이용하여 구성하였다. 발성 단어는 이동전화에 주로 사용되는 중요 기능과 제어 단어, 그리고 숫자음을 포함한 55개 단어로 구성되었으며, 각 화자가 3회씩 발성하였다. 데이터의 채집환경은 잡음이 다소 있는 사무실환경이며, 샘플링율은 8kHz였다. 인식의 기본단위는 48개의 유사음소단위(Phoneme Like Unit : PLU)를 사용하였으며, 정적 특징으로 멜켑스트럼과 동적 특징으로 회귀계수를 특징 파라미터로 사용하였다. 인식실험에서는 OPDP(One Pass Dynamic Programming)알고리즘을 사용하였다. 인식실험을 위한 모델은 각 지역에 따라 학습을 수행한 모델과, 지역에 상관없이 학습한 모델을 만들었으며, 기존의 16Htz의 초기 모델에 8kHz로 채집된 데이터를 적응화시키는 방법을 이용하여 학습을 수행하였다. 인식실험에 있어서는 각 지역별 모델과 지역에 관계없이 학습한 모델에 대하여, 각 지역별로, 그리고 지역에 관계없이 평가용 데이터로 인식실험을 수행하였다 인식실험 결과, $90\%$이상의 비교적 높은 인식률을 얻어 인식시스템 성능의 유효성을 확인할 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.5
• /
• pp.65-72
• /
• 1996

A dynamic self-consistent method previously proposed and validated for the composites containing spherical inclusions is applied to the simplest two dimensional problems : SH wave propagation in unidirectional fiber reinforced composites. The self-consistent conditions for SH wave are derived without limitation on frequency and the wave speed and coherent attenuation are calculated for two composites. THe results of the present theory are compared with those of the multiple scattering theories and another self-consistent theory. At low volume fractions, the present theoretical results coincide with those of the multiple scattering theory using exact pair-correlation function, whereas the results based on another self-consistent theory deviate markedly from the others. As the volume fraction increases, the three theories give different results although they have qualitatively similar trends. The present theoretical results for composites considered in this paper exhibit less dispersion and physically realizable attenuation. An important observation is that the multiple scattering theory predicts vanishingly small attenuation at low frequency with volume fraction is high.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.3
• /
• pp.37-43
• /
• 1995

The procedure and the results of the full scale strain measurement of the long-range high-speed foil catamaran are described. The wave induced stresses at the center struts of the foils were measured during the sea trials in order to evaluate the hydrodynamic force acting on the foils and to verify the structural safety of the foil structures. From the statistical properties of the measured response of the stress, the most probable maximum values of the lift force and the stresses at the foils in service life of the ship are predicted and compared with the design parameters of the foils which were applied in the design of the subject ship. The available prediction processes of the measured stress are studied and the results of the applied processes are compared with each other.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.1
• /
• pp.45-52
• /
• 2001

The proximal isovelocity surface area (PISA) method is an effective way of measuring the regurgitant blood flow rate in the mitral valve. This method defines the modelling required to describe the geometry of the isotach of the PISA. In the normal PISA flow model, the flow rate is calculated assuming that the surface of the isotach is either hemispherical or non-hemispherical numerically. However, this paper evaluated the estimate flow rate using a direct surface subdivision flow model based on the height field after isotach extraction using a region-based scheme. To validate the proposed method, the various PISA flow models were compared using pusatile color Doppler images with flow rates ranging from $30\;cm^3/sec\;to\;60\;cm^3/sec$ flow rate. Whereas the hemispherical flow model had a mean value of $29\;cm^3/sec$ and underestimated the measured flow rate by 35%, the proposed model and non-hemispherical model produced a c;ame mean value of $45\;cm^3/sec$, moreover, both flow models produced a similar pulsatile flow rate.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.83-93
• /
• 2003

This research, in order to study the effects of initial shear stress of anisotropically consolidated sand that has 0.558% fines, performed several undrained static and dynamic triaxial test. To simulate the real field conditions, loose and dense samples were prepared. Besides, the cyclic shear strength of Nakdong River sand under various combinations of initial static shear stress, stress path, pore water pressure and residual strength relationship was studied. By using Bolton's theory, peak internal friction angle at failure which has considerable effects on the relative density and mean effective stress was determined. In p'- q diagram, the phase transformation line moves closer to the failure line as the specimen's initial anistropical consolidation stress increases. Loose sands were more affected than dense sands. The increase of consolidation stress ratio from 1.4 to 1.8 had an effect on liquefaction resistance strength resulting from the increase of relativity density, and showed similar CSR values in dense specimen condition.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5B
• /
• pp.287-293
• /
• 2012

This study suggests the topographic index-based methodology which can be used to represent the saturation of soil and thereby change of variable runoff area at basin scale. ${\infty}$-flow direction method is applied to estimate topographic index because of its freedom from the restriction of 8-flow direction method as well as possibility of the minimum flow dispersion. From the comparison of topographic index distribution with the existing result the methodology is shown to be a workable one. It is judged that the representation of variable runoff area may be a systematic tool to investigate the dynamic and non-linear property of rainfall-runoff process because it can provide the explicit way to spatial distribution of basin saturation.

• Journal of Korea Water Resources Association
• /
• v.46 no.1
• /
• pp.25-34
• /
• 2013

In this study, the development processes of multiple bars in the channels with erodible banks were investigated by double Fourier analysis. The initially straight channels in the experiment flume were widened with eroding the side banks, and the multiple bars were generated and grew due to stalling of the sediment on the bed. The bars migrated downstream and the size of the bars increased with time. The flow was separated around the bars, and the bed and banks near the bars were scoured due to the impinged secondary flow. The morphologic changes were accelerated by the bank erosion, which affected the fluctuations of sediment discharge downstream. The double Fourier analysis of the bed waves showed that 1-1 mode (alternate bar) was dominant at the initial stage of the channel development. As time increased, 2-3 mode (central or multiple bars) was dominant due to the increased width to depth ratio. Moreover, the number of bars in a cross section of the channel were increased due to the non linearity of alternate bars. The width to depth ratio was increased by the bank erosion, which affected the bar migration and the bar wavelength. However, the dimensionless tractive force was decreased by it.