• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.968-973
• /
• 1998

The critical micelle concentrations($CMC^*$) of the mixed surfactant systems of cationic surfactant cetylpyridinium chloride(CPC) and nonionic surfactant Triton X-100(TX-100) in aqueous solutions of salts(KCl and $Na_2CO_3$) and isomeric butanols(tert-butanol, iso-butanol and n-butanol) were determined by UV spectroscopy method. The various thermodynamic values in aqueous solutions of salts and isomeric butanols were compared with the values in pure water, calculated by means of the equation derived from the pseudo-phase separation model. Thermodynamic parameters($X_1$, $\beta$, ${\gamma}i$, $ai^M$, $C_i$ and ${\Delta}H_{mix}$) were found to have great effects of salts and isomeric butanols on the mixed micellization of CPC/TX-100 mixtures, and also in good agreements with the nonideal mixed micelle model. They showed all negative deviations from the ideal mixed micellar behavior.

• The Korean Journal of Quaternary Research
• /
• v.13 no.1
• /
• pp.25-33
• /
• 1999

The relationships between climate (monthly precipitation and temperatures) and tree-ring growth of Korean fir (Abies koreana) growing at subalpine (1,600∼l,700m) zone on the south slope, Joong-Bong and the north slope, Changgun-Bong in the Cheonwang-bong area in Chiri mountains in the southern Korea were analyzed. Two cores from each of 10∼12 trees were extracted. The relationship between tree-ring(standardized) chronologies and climate was analyzed by the response-function method. Climate variables could explain 45.9∼53.8% of total variance in the chronologies. The precipitation response function of Korean fir were similar at both sites in overall ; positive for March∼May and August, and negative for February and July. The south-slope fir of Joong-Bong possessed higher negative temperature response function for February and August than north-slope one. The positive response function for April temperature was significant for both sites. In contrary to other subalpine species (e.g., Pinus koraiensis and Taxus cuspidata) in South Korea, whose growths are positively correlated with temperature in most seasons, the growths of Korean fir trees in Mt. Chiri appeared to be mainly limited by the moisture regime of spring prior to the cambial growth and early growing season.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.135-146
• /
• 2015

To provide the data necessary to determine the design wind speed for calculating the wind load acting on a greenhouse, we measured the wind speed below 10m height and analyzed the power law exponents at Buan and Gunwi. A wind speed greater than $5m{\cdot}s^{-1}$ is appropriate for calculating the power law exponent necessary to determine the wind speed distribution function according to height. We observed that the wind speed increased according to a power law function with increased height at Buan, showing a similar trend to the RDC and JGHA standards. Therefore, this result should be applied when determining the power law function for calculating the design wind speed of the greenhouse structure. The ordinary trend is that if terrain roughness increases the value of power law exponent also increases, but in the case of Gunwi the value of power law exponent was 0.06, which shows contrary value than that of the ordinary trend. This contrary trend was due to the elevations difference of 2m between tower installed and surrounding area, which cause contraction in streamline. The power law exponent started to decrease at 7 am, stopped decreasing and started to increase at 3 pm, and stopped increasing and remained constant at 12 pm at Buan. These changes correspond to the general change trends of the power law exponent. The calculated value of the shape parameter for Buan was 1.51, confirming that the wind characteristics at Buan, a reclaimed area near the coast, were similar to those of coastal areas in Jeju.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.5
• /
• pp.27-33
• /
• 2017

In this research, laboratory tests were carried out to investigate the engineering properties of Light-Weight Air Foamed Soil (LWAS) based on silty clays with the animal foaming agent and cement. LWAS has been used as an embankment material over soft ground for road and side extension of the existing road. In field, unit weight and flow value is measured right after producing in mixing plant in order to control the quality of LWAS, and laboratory tests are carried out to confirm the quality through compressive strength of LWAS as well. In this research, direct estimation of the specification requirement of strength using flow values in field is the main purpose of the study together with other characteristics. From the test results, it can be seen that flow values increase with the initial water content and unit weight increases with the depth due to material segregation. Compared to the upper specimen, lower end of 60 cm specimen shows about 2 times higher compressive strength. Relationship between flow values and normalized factor presented by Yoon & Kim (2004) was presented. With that relationship, compressive strength can be predicted from flow values in field. From the relationship, the normalized factor was calculated. Thereafter calculated compressive strengths according to the flow values were compared to measured strengths in the laboratory. The higher the initial water content of the dredged soil has, the better relationship between predicted and measured shows. Therefore it is necessary to predict the compressive strength in advance through the relationship between the flow value and the normalized factor to reflect it in the design stage.

• Geophysics and Geophysical Exploration
• /
• v.18 no.2
• /
• pp.85-90
• /
• 2015

Orientation corrections for Korean seismic stations were calculated by using ambient noise cross-correlation. This method uses Rayleigh waves extracted from ambient noise cross-correlation instead of teleseismic waveforms from earthquakes, which have been generally used for previous studies. The theoretical background of the method is that the phase of radial-vertical cross-correlation function should be the same as that of $90^{\circ}$ phase-shifted vertical-vertical cross-correlation function. The results calculated from stacked cross-correlograms from Jan. 2007 to Sep. 2008 are comparable to the previous results obtained from teleseismic waveforms. In addition, overall the standard deviations of orientation corrections are less than $5^{\circ}$. The temporal variation in orientation corrections calculated for every 30 days shows no significant change and also standard deviations of them are mostly less than $5^{\circ}$. This means that the orientations of stations used in this study have been kept constant during the period. The sensitivity test for stacking period of the ambient noise cross-correlation method shows that continuous ambient noise record of at least about 30 days is required for estimating reliable orientation corrections.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.1
• /
• pp.1-10
• /
• 2003

In this paper, the laboratory test results with middle-sired ,soil box test in modeling the in-situ installing of horizontal drains are discussed the estimation of the optimum negative pressure. The test was carried out in the different vacuum pressure conditions together with the measurement for the settlement and volume change of drained water by the installed drains during the consolidation process. After the test, the water content was measured to both directions of lateral distance from the drain and depth of the soil, to find out the distribution of ground improvement and strength enhancement. From the analysis on the distribution of water content, the gradual application of vacuum pressure to higher level by pre-determined stages starting from low vacuum pressure is found to be effective and desirable. In the comparison of the degrees of consolidation with elapsed time, the calculated value by the prediction method based on the Barren's conventional theory showed a good agreement with the measured value. With this, It is positively considered that the applicability of the prediction method based on Barren's theory to the practical design of horizontal drains can be justified such as in the calculation of drain spacing and consolidation period.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.2
• /
• pp.16-27
• /
• 2011

Embryo is a very early stage of the development of multicellular organism such as animals and plants. It is an important research target for studying ontogeny because the fundamental body system of multicellular organism is determined during an embryo state. Researchers in the developmental biology have a large volume of embryo image databases for studying embryos and they frequently search for an embryo image efficiently from those databases. Thus, it is crucial to organize databases for their efficient search. Hierarchical clustering methods have been widely used for database organization. However, most of previous algorithms tend to produce a highly skewed tree as a result of clustering because they do not simultaneously consider both the size of a cluster and the number of objects within the cluster. The skewed tree requires much time to be traversed in users' search process. In this paper, we propose a method that effectively organizes a large volume of embryo image data in a balanced tree structure. We first represent embryo image data as a similarity-based graph. Next, we identify clusters by performing a graph partitioning algorithm repeatedly. We check constantly the size of a cluster and the number of objects, and partition clusters whose size is too large or whose number of objects is too high, which prevents clusters from growing too large or having too many objects. We show the superiority of the proposed method by extensive experiments. Moreover, we implement the visualization tool to help users quickly and easily navigate the embryo image database.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.35-44
• /
• 2000

In this paper, we propose a new trajectory model for characterizing segmental features and their interaction based upon a general framework of hidden Markov models. Each segment, a sequence of vectors, is represented by a trajectory of observed sequences. This trajectory is obtained by applying a new design matrix which includes transitional information on contiguous frames, and is characterized as a polynomial regression function. To apply the trajectory to the segmental HMM, the frame features are replaced with the trajectory of a given segment. We also propose the likelihood of a given segment and the estimation of trajectory parameters. The obervation probability of a given segment is represented as the relation between the segment likelihood and the estimation error of the trajectories. The estimation error of a trajectory is considered as the weight of the likelihood of a given segment in a state. This weight represents the probability of how well the corresponding trajectory characterize the segment. The proposed model can be regarded as a generalization of a conventional HMM and a parametric trajectory model. The experimental results are reported on the TIMIT corpus and performance is show to improve significantly over that of the conventional HMM.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.223-235
• /
• 1993

요통(Lowback Pain)을 유발하는 주요원인으로 알려져있는 MMH(Manual Materials Handling) 작업에 있어서 작업조건의 변화가 근육의 활동과 피로도에 미치는 영향을 평가하기 위해 4가지 서로 다른 작업조건하에서 몸통부위(Trunk)의 주요근육에 대한 EMG 파형분석을 실시 하였다. 본 연구에서의 분석대항작업은 실제 작업조건과 유사하레 설계된 120분간의 단속적인 인양(Lifting)/하역(Lowering) 작업으로서 작업중량은 작업자의 MVIS(Maximum Voluntary Isometric Strength)를 기준으로 설정되었으며, 매 10분 간격으로 EMG 측정이 이루어졌다. 작업물이 작업자의 정면에 위치한 대칭형(Symmetric) 작업의 경우 배면부(Dorsal) 근육인 천극근(Erector Spinae)과 활배근(Latissimus Dorsi)이 활동근(Active Muscle)인 것으로 나타났으며, 정중면(Medial Plane)을 중심으로 좌우측 근육이 동일한 근력을 발휘하였다. 작업물이 작업자의 한쪽 측면에 위치한 90도 비대칭형(Asymmetric) 작업의 경우 천극근과 활배근외에 작업물과 반대쪽 외사근(External Oblique)이 활동근으로 추가되었으며, 작업물과 반대쪽의 근육들이 더욱 큰 근력을 발휘하였다. 작업의 반복에 따른 근육의 피로도를 평가하기 위해 실시한 EMG 파형의 Spectral Analysis 결과, 비대칭형 작업시 작업물과 반대쪽의 천극근에서 작업시간의 경과에 따라 중위주파수(Median Power Frequency)가 저주 파수대로 천이(Lower Shift)하는 현상이 나타났으며, 일정한 작업량이라도 작업중량을 줄이고 작업 빈도를 높여서 작업할 경우에 이러한 현상이 더욱 두드러졌다. 작업시간의 경과에 따른 MVIS의 감소 현상은 작업빈도가 높고 비대칭형 작업일 때 가장 크게 나타났다. 총손실을 줄이고, 상대적 비용절감효과를 갖게할 수 있다고 하였다. 따라서 본 연구에서는 성인 여성기성복의 치수적합성을 높이기위하여 출산 후 중년에 접어 들면서 체형이 변화되는 것을 고려하여 연령을 분류하고(18세-34세, 30세-51세), 각 연령 집단에 따른 체형을 각각 3가지로 분류하였다. 이에 따라 의복 생산시의 총손실을 줄이기위한 상의, 하의생산시 필요한 부위별 최적규격치 간격을 제시하였다.적인 기능으로 보여지는 것에 좁혀서 작업능력의 연령증가 변화에 대하여다원적 평가를 하는 것이 실제적이라고 할 수 있다. 따라서 본 연구에서는 인간이 가지고 있는 다수의 기능중에서 수지교 치성과 연령증가와의 관계를 조사한다. 만약 연령증가 만으로 수지교치성을 평가 할 수 없는 경우에는 어떠한 요인이 수지기민성의 변화에 영향을 미치는가를 검토한다.t list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과 0.05 - 0.10 mm/hr 의 범위로서 이로 인한 강우손실량은 큰 의미가 없음을 알았다.재발이 나타난 3례의 환자를 제외한 9례 (75%)에서는 현재까지 재발소견을 보이지 않고 있다. 이러한 결과는 다른 보고자들과 유사한 결과를

• Journal of the Korean Geographical Society
• /
• v.51 no.4
• /
• pp.509-523
• /
• 2016

The soil prediction can provide quantitative soil information for sustainable mountainous ecosystem management. Visible near infrared spectroscopy, one of soil prediction methods, has been applied to predict several soil properties with effective costs, rapid and nondesctructive analysis, and satisfactory accuracy. Spectral preprocessing is a essential procedure to correct noisy spectra for visible near infrared spectroscopy. However, there are no attempts to evaluate various spectral preprocessing methods. We tested 5 different pretreatments, namely continuum removal, Savitzky-Golay filter, discrete wavelet transform, 1st derivative, and 2nd derivative to predict soil carbon(C) and nitrogen(N). Partial least squares regression was used for the prediction method. The total of 153 soil samples was split into 122 samples for calibration and 31 samples for validation. In the all range, absorption was increased with increasing C contents. Specifically, the visible region (650nm and 700nm) showed high values of the correlation coefficient with soil C and N contents. For spectral preprocessing methods, continuum removal had the highest prediction accuracy(Root Mean Square Error) for C(9.53mg/g) and N(0.79mg/g). Therefore, continuum removal was selected as the best preprocessing method. Additionally, there were no distinct differences between Savitzky-Golay filter and discrete wavelet transform for visual assessment and the methods showed similar validation results. According to the results, we also recommended Savitzky-Golay filter that is a simple pre-treatment with continuum removal.