• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.4
• /
• pp.417-424
• /
• 2011

Natural convection heat transfer experiments from two parallel horizontal cylinders were performed varying the Pitch-to-Diameter ratio (P/D) of 1.02-9 at Sc of 2,014 to 8,334 and $Ra_D$ of $1.5{\times}10^8$ to $4.5{\times}10^{10}$. Mass transfer experiments that are analogous to the heat transfer experiments were performed using copper electroplating system. In all cases, the measured heat transfer rates for the lower cylinder agreed well with the existing heat transfer correlations developed from a single cylinder. For laminar flows, the measured heat transfer rates of the upper cylinder were less than those of the lower cylinder at P/D less than about 1.5. However, as the P/D increased, the heat transfer rates of the upper cylinder increased. For turbulent flows, the heat transfer rates of the upper cylinder were considerably similar to those of the lower cylinder when the P/D is approximately unity. In contrast, as the P/D increased, the heat transfer rates of the upper cylinder were always higher than those of the lower cylinder.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.15-15
• /
• 2017

본 연구는 필드 작업 시 작업조건에 따른 정식기의 PTO 부하를 측정하고, 이를 이용하여 작업조건에 따른 안전율 시뮬레이션을 목적으로 수행하였다. 부하 계측 시스템은 PTO 축의 부하를 측정하기 위한 토크 센서, 토크 센서에서 발생한 신호를 수집하기 위한 데이터 수집장치, 노트북에 전원을 공급하기 위한 파워 컨트롤러로 구성하였다. 토크센서에서 입력된 부하 데이터를 처리하기 위한 소프트웨어는 Labview(Version 2011, National Instrument, USA)를 사용하였다. 포장시험은 유사한 토양 조건에서 4회 반복 시험을 수행하였으며, 작업속도 고속 조건에서 4개의 주간거리(26, 35, 43, 80cm)와 3개의 식부깊이 (85, 105, 136mm)에 대하여 수행하였다. 안전율 시뮬레이션을 위한 소프트웨어는 KISSsoft(Version 2016, Kissling & Co. AG, Switzerland)를 사용하였다. 식부깊이 85mm에서 주간거리 26, 35, 43, 80cm일 때 작업시 각각 굽힘 안전율은 2.2874, 2.4507, 2.7139, 2.8064로 나타났으며 접촉 안전율은 1.1787, 1.2799, 1.3205, 1.3275로 나타났다. 식부깊이 105mm에서 주간거리 26, 35, 43, 80cm일 때 작업 시 각각 굽힘 안전율은 2.1261, 2.2781, 2.4879, 2.5866로 나타났으며 접촉 안전율은 1.1296, 1.1425, 1.2710, 1.2507로 나타났다. 식부깊이 136mm에서 주간거리 26, 35, 43, 80cm일 때 작업 시 각각 굽힘 안전율은 1.6587, 1.6651, 1.7824, 2.2198로 나타났으며 접촉 안전율은 1.0030, 1.0104, 1.0450, 1.1931로 나타났다. 주간거리에 따른 식부깊이의 굽힘 안전율과 접촉 안전율은 가장 차이가 큰 주간거리 80cm에서 식부깊이가 85, 105, 136mm일 때 작업 시 각각 굽힘 안전율은 2.8064, 2.5866, 2.2198로 나타났으며 접촉 안전율은 1.3275, 1.2507, 1.1931로 나타났다. 시뮬레이션 결과 정식기 베벨기어의 안전율은 주간거리가 짧을수록, 식부깊이가 깊을수록 더 낮게 나타났다. 그러므로 정식 작업 시 정식기의 부하와 내구성을 고려하여 적절한 작업조건을 선정해야 함을 알 수 있다. 또한 향후 다양한 토양 조건 및 작업 단수 등에 따른 포장시험을 추가로 진행하여 여러 조건에서의 안전율 시뮬레이션을 수행할 예정이다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.13-21
• /
• 2023

In this study, the coastal airborne chlorides were investigated in the Incheon Port, South Korea. Monthly measurements of coastal airborne chlorides were taken for a total of 2 years from September 2021 to August 2023 at 15 locations in North, South, and New Port. We analyzed the distribution characteristics of airborne chloride based on port facilities and measurement environments, as well as the reduction characteristics of the airborne chloride with respect to coastal distance. As a result, the monthly distribution range of the airborne chloride in the North, South, and New Port varied similarly, ranging from 0.4 to 3.3 mdd. Due to the influence of seasonal winds considering the direction of the coastline, both the North Port and South Port had higher the airborne chloride in winter, while the New Port had higher content in summer. The airborne chlorides were higher at locations inside an inland sea compared to those outside an inland sea. This is because the wind coming from the sea passed through the inland sea. Even in the same region with identical coastal distances, there were variations in airborne chloride levels depending on the height above the ground. In tidal zone, the monthly airborne chlorides were significantly higher in the lower part than in the upper part. The rate of decrease equation of airborne chlorides for each port based on the distance from the coastline was derived, and the results showed that as the distance from the coastline increased, the rate of decrease in airborne chlorides was the highest for New Port and the lowest for South Port.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.11a
• /
• pp.805-808
• /
• 2004

본 논문에서는 두 단백질의 구조적 유사성을 기반으로 한 단백질 비교를 위해서 전처리 기법으로서의 주성분분석기법을 소개한다. 기존의 백본 및 알파탄소 간의 거리행렬(distance matrix), 2차 구조 비교기법, 구역(segment)단위의 비교 기법과 같은 단백질 비교 기법들은 위치이동(translation)와 회전(rotation)에 불변한(invariant) 차이를 구하기 위하여 거리행렬을 이용하였다. 그리고, 난 다음 이들의 최적화 과정을 거쳤다. 그러나, 본 논문에서 제시하는 전처리 기법으로서의 주성분분석기법은 단백질 구조를 전체적인 구조 관점에서 위치를 정렬시킨 후에 단백질 간의 구조를 비교하는 방식이다. 단백질의 구조의 방향성(Orientation)을 맞춘 다음에는 다양한 단백질 표현으로 구를 비교할 수 있다. 본 논문에서는 두 단백질의 구조의 유사성을 측정하기 위한 간결한 단백질 표현(representation)으로 3 차원 에지 히스토그램을 사용하였다. 이 기법은 방향성을 정렬하기 위하여 기존의 방법에서 사용되었던 반복적인 거리계산을 통한 최적화하는 과정을 없앰으로써 단백질 구조 비교 시간을 단축할 수 있는 새로운 단백질 구조 비교 패러다임을 가능하게 한다. 따라서, 이 패러다임을 통하여 적절한 단백질 구조 방향성 정렬과 단백질 구조 표현을 이용한 단백질 구조 비교 검색 시스템은 많은 양의 단백질 구조 정보로부터 원하는 형태의 단백질 구조를 빠른 시간에 검색할 수 있는 장점을 가질 수 있다.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.1
• /
• pp.89-99
• /
• 2015

The World Economic Forum and the Korean Ministry of Knowledge Economy have selected big data as one of the top 10 in core information technology. The key of big data is to analyze effectively the properties that do have data. Clustering analysis method of big data techniques is a method of assigning a set of objects into the clusters so that the objects in the same cluster are more similar to each other clusters. Similarity measures being used in the cluster analysis may be classified into various types depending on the nature of the data. In this paper, we studied upper and lower bounds for binary similarity measures with negative matches such as Russel and Rao measure, simple matching measure by Sokal and Michener, Rogers and Tanimoto measure, Sokal and Sneath measure, Hamann measure, and Baroni-Urbani and Buser mesures I, II. And the comparative studies with these measures were shown by real data and simulated experiment.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.355-373
• /
• 2017

Tunnelling in urban areas, it is essential to understand existing structure-tunnel interactive behavior. Serviced structures in the city are supported by pile foundation, since they are certainly effected due to tunnelling. In this research, thus, pile load distribution and ground behavior due to tunnelling below grouped pile were investigated using laboratory model test. Grouped pile foundations were considered as 2, 3 row pile and offsets (between pile tip and tunnel crown: 0.5D, 1.0D and 1.5D for generalization to tunnel diameter, D means tunnel diameter). Soil in the tank for laboratory model test was formed by loose sand (relative density: Dr = 30%) and strain gauges were attached to the pile inner shaft to estimate distribution of axial force. Also, settlements of grouped pile and adjacent ground surface depending on the offsets were measured by LVDT and dial gauge, respectively. Tunnelling-induced deformation of underground was measured by close range photogrammetric technique. Numerical analysis was conducted to analyze and compare with results from laboratory model test and close range photogrammetry. For expression of tunnel excavation, the concept of volume loss was applied in this study, it was 1.5%. As a result from this study, far offset, the smaller reduction of pile axial load and was appeared trend of settlement was similar among them. Particulary, ratio of pile load and settlement reduction were larger when the offset is from 0.5D to 1.0D than from 1.0D to 1.5D.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.347-354
• /
• 2011

This paper presents a time-domain based asynchronous IR-UWB ranging system. This system accomplishes the ranging by detecting peaks from the outputs of a correlator implemented by a FIR filter. To discriminate the peaks due to a signal component, we use windowing for the correlated data within which the data are sorted in amplitude-ascending order and the noise level is calculated. Comparing with the recently presented frequency-domain based ranging system, we show the system structure and explain how it operates for ranging. Moreover, through the simulations, the proposed system is compared with the frequency-domain based system in terms of performance.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.5
• /
• pp.546-550
• /
• 2010

In this paper, we propose a method for the postprocessing of cursive script recognition in Wine Label Images. The proposed method mainly consists of three steps: combination matrix generation, character combination filtering, string matching. Firstly, the combination matrix generation step detects all possible combinations from a recognition result for each of the pieces. Secondly, the unnecessary information in the combination matrix is removed by comparing with bigram of word in the lexicon. Finally, string matching step decides the identity of result as a best matched word in the lexicon based on the levenshtein distance. An experimental result shows that the recognition accuracy is 85.8%.

• The Journal of the Korea Contents Association
• /
• v.4 no.3
• /
• pp.107-113
• /
• 2004

This paper improved the performance of the face recognition system using the PCA/LDA hybrid method based on the facial geometric feature and the Wavelet transform. Because the previous PCA/LDA methods have measured the similarity according to the formal dispersion, they could not reflect facial boundaries exactly In order to recover this defect, this paper proposed the method using the distance between eyes and mouth. If the difference of the measured distances on the query and the training images is over the given threshold, then the method reorders the candidate images according to energy feature vectors of eyes, a nose, and a chin. To evaluate the performance of the proposed method the computer simulations have been performed with four hundred facial images in the ORL database. The results showed that our method improves about 4％ recognition rate over the previous PCA/LDA method.

• The Journal of the Korea Contents Association
• /
• v.3 no.2
• /
• pp.24-30
• /
• 2003

Pre-existing authentication system such as token based method, knowledge-based and hybrid method have problems such as loss and wiretapping. for this, this paper describes the biometric authentication system which have the excellent convenience and security. In particular, a new biometric system by human face biometric features which have the non-enforcement and non-touch measurement is proposed. Firstly, facial features are extracted by Y- histogram and tilted face images we corrected by coordinate transformation and scaling has done for achieving independent of the camera positions. Secondly, feature vectors are extracted such as distance and intersection angles and similarities we measured by fuzzy relation matrix. finally, the effectiveness of this paper is demonstrated by experiments.