• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.121-124
• /
• 2005

The existing reinforcement methods of construction are the actual condition without the method of checking exact injection of adhesives clearly by the opacity of reinforcement material. In this study, in order to solve such a problem, the high strength transparent panel using a glass fiber is developed and in order to examine reinforcement effect of a panel clearly, the structure performance evaluation experiment was conducted. As a result, we knew that it can check with the naked eye the injection process of adhesives and reinforcement effect was also observable.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2000.10b
• /
• pp.71-74
• /
• 2000

일반적으로 온실은 저온기에는 보온이나 난방을 하면서 적극 사용하고 있으나 고온기에는 냉방에 소요되는 에너지가 난방에 비해 상대적으로 많이 소요되므로 온실의 활용도가 떨어지게 된다. 자연환기 시스템은 에너지를 사용하지 않거나 최소한으로 줄여 온실내 온도를 최소한 외부와 동일하게 하거나 낮게 하기 위한 장치라고 할 수 있다. 자연환기를 위한 환기창으로 유리온실이나 경질판 온실과 같은 양지붕형 온실에서는 측창으로 3Way방식이나 권취식, 프로젝트방식 등 다양한 환기창을 사용하고 있으나 천창은 주로 온실 길이방향의 연속형 창틀을 랙앤피니언이나 X형 개폐암으로 개폐하는 프로젝트 방식을 많이 사용하고 있다. (중략)

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.751-756
• /
• 2000

The structural behavior of reinforced concrete slabs strengthened by glass fiber reinforced plastic-panels experimentally investigated. The experimental variables are strengthening length, strengthening width, and pre-crack existence. The pre-cracked slabs are initially loaded to 70 percent of ultimate flexural capacity and subsequently repaired with GFRP-Panels bonded to the tension face of the slabs. Five one-way slabs were tested to failure. The main failure mode of strengthened slabs is separation failure by crack propagation from load point section to end of plate. The behavior of strengthened slabs is represented by a maximum load, load-deflection curves an load-strain curves.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.6
• /
• pp.29-36
• /
• 2004

In this study, The fatigue properties of the GFRP composite panels of which core was made of the polymer mortar and both facings were reinforced by the high-tensile GFRP were surveyed. Composite-panel specimens consisted of polymer mortar core and GFRP compressive and tensile sides with various thickness were produced for an experimental study. Flexural fatigue tests were conducted to examine the correlation between the fatigue load and the fatigue life for various thickness of core and facings, and its results are presented. The correlation obtained in this study between the fatigue load and the fatigue life for various thickness arc in good agreement with the modified Miner's law.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.6
• /
• pp.37-45
• /
• 2004

In this study, twelve different glass fiber reinforced polymer concrete composite panel specimens with various rib heights and tensile side and reinforced side thickness were produced, and the flexural tests were conducted to figure out the effect of The height and thickness influencing on the flexural properties of composite panel. Test results of the study are presented. Especially, a prediction equation of the ultimate moment based on the strength design method agrees well with the test results, and it is thought to be useful for the corresponding design of cross-section according to various spans as the glass fiber reinforced polymer concrete composite panel is applied for a permanent mold.

• The Science & Technology
• /
• v.33 no.8 s.375
• /
• pp.16-17
• /
• 2000

뉴욕증권거래소의 객장은 집어던지는 매매전표, 주문하는 거래인의 함성 그리고 미친듯이 두드리는 컴퓨터 건반 소리로 온통 난장판같다. 그러나 이런 소란 속에서 객장부 수석차장 안 앨런은 마치 딴 세상에서 살고 있는 것처럼 조용히 자기 일에만 몰두하고 있다. 강철-유리로 격리된 작은 방에서 그녀는 소음과 번쩍이는 게시판의 숫자에는 개의치 않고 모든 거래현황을 컴퓨터모델로 보여 주는 1.8m ×1.2m 크기의 납작한 디스플레이패널에 정신을 집중하고 있다. 앨런은 최근 신설한 이 '뉴욕증시 가상거래객장'에서 마우스를 움직여 특정한 주식이나 주식집단의 시세와 거래량의 실시나 변화를 나타내는 아이콘을 찍으면 궁금한 가격변동이나 거래패턴을 그 자리에서 알 수 있다. '가상거래객장'의 울긋불긋한 그래픽과 심벌들을 통해 그녀는 거래소의 '맥동'을 언제든지 모니터할 수 있다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.05a
• /
• pp.168-171
• /
• 2006

플라스마 디스플레이는 패널내부에 진공상태를 요구하며 작동 중에 발생하는 불순가스에 의해 진공도가 떨어져 소자 수명, 휘도, 방전 개시 전압 등 많은 부분에 문제를 야기시킨다. 이에 불순가스 발생의 원인을 규명하기 위해 PDP에 상용적으로 사용되는 유연 유전체를 이용하여 열적 거동에 의해 불순가스 발생과 고 진공에서의 표면 조도를 분석하였다. $100^{\circ}$에서부터 $H_{2}O$의 가스가 발생되며 $300^{\circ}C$이상에서는 $CO_2$와 함께 가스가 발생하였다. 고 진공에서 표면조도는 상온에서부터 상승하다가 유리 전이점에서 감소하며, 다시 연화점 이상에서 상승하는 것으로 나타났다. 이와 같은 결과는 PDP에서 불순가스 발생의 원인을 규명하기 위한 기초적인 실험이라 할 수 있다.

• Transactions of the Society of Information Storage Systems
• /
• v.10 no.2
• /
• pp.39-44
• /
• 2014

LCD panels are used widely in all sorts of devices. Since glass is the main material used to make the panels, scratch resistance is an important issue in acquiring high quality LCD panels. In this work the wear behaviors of three types of commercially available LCD panel glasses were investigated. A pin-on-reciprocating tribotester was used to perform the wear tests using the glass specimens against a stainless steel ball. The hardness of the specimens was initially obtained. It was shown that the wear amount varied with respect to the applied load as well as the type of glass. The wear pattern of the glass specimen was also characterized using confocal microscopy. It is expected that the results of this work will aid in improving the tribological properties of LCD panel glass.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.253-253
• /
• 2010

유리 기판 상에 시스템 온 패널과 같은 차세대 디스플레이 구현과 평판형 디스플레이의 문제점 해결을 위하여 비휘발성 메모리 소자 등의 전자 소자 집적화와 빠른 구동 속도를 가진 박막트랜지스터가 요구된다. 본 논문에서는 비휘발성 메모리 소자에서 MONOnS 각 layer층의 두께 따른 특성에 대한 연구를 진행하였다. 실험은 ONO 구조를 12.5nm/35nm/2.7nm, 12.5nm/20nm/2.3nm, 8.5nm/10nm/2.3nm, 6.5nm/10nm/1.9nm 의 두께로 증착하였다. ${\Delta}VFB$, Retention time, capacitance을 측정하여 oxide/Nitride/Oxynitride 층의 두께 변화를 통해 최적화된 tunneling layer와 charge storage layer, 그리고 blocking layer의 두께를 알 수 있다.

• Food Science and Preservation
• /
• v.23 no.7
• /
• pp.1065-1073
• /
• 2016

This study investigated the sensory attributes and quality characteristics of Fuji apples based on market commodity price to provide data for quality index of Fuji apples. Samples were purchased from the Garak market (Seoul Agro-Fisheries & Food Corporation) and divided into four groups depending on the price such as group A, B, C, D. There were no significant differences in their volume and weight among groups. In the soluble solid content and total free sugar, A and B group (high price) showed higher content than those of C and D (low price) group. And also, the A group and B, C, D group showed 386.29 mg% and 320.09~359.28 mg% in the total organic acid content, respectively. As an sensory evaluation results, A group and B group were evaluated higher score than those of C and D group in the uniformity of red color and glossiness of skin and unique apple sensory attributes using quantitative descriptive analysis. Consumer test showed similar to quantitative descriptive analysis results in the various sensory attributes. In the analysis results between quality characteristics and sensory attributes of Fuji apples, total acceptability was correlated positively with titratable acidity (r=0.58), soluble solid (r=0.89), soluble solid content/titratable acidity ratio (r=0.42), total free sugar (r=0.36) and total organic acid (r=0.38). Based on principal component analysis of apple's quality characteristics, apples were primary separated along the first principal component (pH, acidity, soluble solid content, total free sugar, organic acid), which accounted for 66.01% of total variance. In addition, principal component analysis of sensory evaluation revealed a total variance for the quantitative descriptive of 55. 65% and a total variance for the consumer test of 55.84%.