• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.6-10
• /
• 2002

Al films (1000~4000${\AA}$)were deposited on glass and polymer(polyethersulfine) plastic substrates by DC-magnetron sputtering for plastic-based flat-panel displays. A stepped heating process was used both to improve the electrical characteristics and to diminish the thermal expansion of the polymer substrates. Following this procedure, we could succeed in sputtering Al films without any cracking or shrinkage of the polymer substrates. The treatment temperatures and deposited process of Al films were under 200$^{\circ}C$. Also, this low temperature fabrication process allows the application of plastic substrates. Scanning Electrom Microscopy, Atomic Force Microscopy, X-ray Dffractometry, and electrical measurements such as resistivity measurements were performed to investigate the properties of deposited the Al films and their reliability. 

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.621-626
• /
• 2012

In this study, the composite coating materials with improved thermal insulation property were prepared by incorporating the hollow micro-spheres with high heat transfer resistance. The UV curable resin system consisting of hexa aliphatic urethane acrylate (UP118), trimethylolpropane triacrylate (TMPTA), 1,6-hexanediol diacrylate (HDDA), and photoinitiator (Irgacure184) was employed as an organic binder. The glass substrates were coated by the prepared composites via bar coating method and cured under UV radiation. The optical transparency, thermal insulation property, adhesion, and surface hardness of the glass coated with composites containing different type of micro-spheres were investigated. The incorporation of micro-spheres with only 20 vol% of content resulted in remarkable improvement in the thermal insulation property of the coated glass. In addition, the transparent coated glass with light transmittance of about 80% could be obtained when silica micro-sphere (SP) was used as a thermal barrier.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.176-177
• /
• 2000

ITO 박막은 투명전도성과 열-반사 특성을 효율적으로 가지면서도 제작과정에서 고온 열처리가 수반되어야만 한다. 이것은 기판물질에 제한을 가져왔고, ITO 박막이 적용된 기기의 중량이나 파손의 위험, 이동의 불편함을 주고 있다. 최근에는 이러한 불리함을 극복하기 위하여 저온 기판에서 투명전도성의 효율을 높여 기판을 유기물질로 대체하려는 연구들이 진행되고 있다. 유기물질 기판은 유리 기판에 비해 가벼운 중량, 작은 체적, 접을 수도 있고 휴대도 간편한 깨지지 않는 flexible opto-electrical devices 에 응용성이 크다$^{(l.2.3)}$ . (중략)

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.2
• /
• pp.185-191
• /
• 2003

In this study, We measured transmittance and color change of various photochromic lens as a function of temperature(6, 12, $28^{\circ}C$), irradiation time of UVA lamp and the types of materials(plastic and glass) and distribution of photochromic ingredients(coated and bulk type). The coated-type photochromic lens showed higher saturated value than bulk-type lens without regard to temperature. And darkening rate of smoke color lenses were higher compare to brown lens in case of glass photochromic lens. All of photochromic lens passed ANSI Z80.3 regulation in transmittance and color independent of temperature. The saturated values of plastic photochromic lens excluded coated-type and glass photochromic lens were ranked as cosmetic use. The saturated value of coated-type. Tbr and TMs were general applications in $6^{\circ}C$ and $12^{\circ}C$, but cosmetic purpose in $28^{\circ}C$. The darkening rate was increased with decreasing temperature, whereas the fading rate became higher with increasing temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.06a
• /
• pp.28-28
• /
• 1998

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.70.3-70.3
• /
• 2010

CBD 방법은 저비용으로 양질의 CdS 박막을 얻을 수 있는 증착 방법으로, 고효율의 CdS/CdTe 태양전지를 얻기에도 적당하다. 투명전도 산화막(Transparent Conducting Oxide - TCO)이 입혀진 유리 기판 위에 CBD 방식으로 형성된 CdS 박막은 추후 CdTe 박막형성을 위해 근접승화법(Close Spaced Sublimation - CSS) 장치에 기판으로 사용된다. 또한 추후 열처리공정을 겪게 되는데, 이때 고온 상태에 높여지기 때문에 CdS 박막의 물성에 변화를 나타나게 된다. 이를 XRD, Raman spectrometer, SEM, EDS, 등의 분석 장치를 이용하여 특성 변화를 분석 하고자 한다.

• Electrical & Electronic Materials
• /
• v.9 no.5
• /
• pp.490-497
• /
• 1996

RF마그네트론 스파터링에 의한 $sSnO_2$ 박막을 증착한 결과 작동조건에 따라 표면에서 막손상이 발생하였는데, 이는 target에서 생성된 높은 에너지의 고속입자가 기판에서 직접 충돌로 일어나며, 마그네트론의 자계분포와도 관계된다. 또한 기판의 위치에 따라 박막의 전기적, 구조적 특성이 급격히 변하는데 본 논문은 중심자석의 세기와 RF power, 가스압력, 그리고 기판온도 등의 스파터링 작동조건을 변화시키면서 박막의 비손상을 검토하였고, 물성특성을 평가하였다. 실험결과로 부터 기판의 외축부에서 제작된 박막은 전반적으로 막손상이 없었고, 특히 target의 중심자석을 Cobalt로 설치하고 15 mTorr의 가스압력과 50 W의 RF power로 한 경우 가장 우수한 특성을 가진 박막을 얻을 수 있었다. 추가로 막손상을 방지하고자, 환원형의 masking glass를 target위에 설치하였는데, 고에너지 입자의 직접 충돌을 확실히 차단할 수 있었으며, 비저항율도 target의 부식부위 (erosion)에 대응하는 부분에서 100배 정도로 개선하였다.

• Korean Journal of Crystallography
• /
• v.4 no.2
• /
• pp.92-99
• /
• 1993

ZnO thin films were depositsd by Plasma enhanced CVD (PUW) using Diethylzinc and N2O gas, and micro-structue of ZnO thin films were investigated ZnO thin films composed of micro-crystallites was deposited at the substrate of loot. However, highly c-axis oriented ZnO thin films were deposited on the glass substrates above 200℃. TEM analysis revealed that an epitaxial (002) ZnO thin film was deposited on c-plane sapphire substrate at the substrate temperature of 350℃, and More patterns showing partial dislocation were observed at the grain boundary.

• Journal of the Korean Vacuum Society
• /
• v.10 no.4
• /
• pp.416-423
• /
• 2001

Microstructural, optical and dielectric properties of $SrTiO_3$ thin films were investigated. These films were deposited on the ITO glasses by rf-magnetron sputtering at room temperature and subequently heat treated in $O_2$ atmosphere at various temperatures. It has been found from X-ray diffraction patterns that as-deposited films prepared at room temperature are amorphous, while the films heat treated at temperature range of 400~$600^{\circ}C$ reveal the structure of pyrochlore. On the other hand, the structure of perovskite is dominantly observed in the films heat treated at temperatures over $650^{\circ}C$ in which the drastic changes of optical band gap and dielectric constant are observed. In addition, the phase transition peak is observed at $272^{\circ}C$ in the films heat treated at $600^{\circ}C$, while the dielectric dispersion is observed at near $310^{\circ}C$ in the films heat treated at $650^{\circ}C$.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.223-228
• /
• 1998

Glass films of $SiO_2-TiO_2-M_xO_y$ (M = Co, Cr or Cu) have been prepared on soda-lime-silica slide glasses by the chemical solution method using a spin-coating technique. Commercially available tetraethyl orthosilicate, titanium trichloride, and cobalt-, chromium- and copper-nitrates were used as starting materials. No crystalline segregations of $Co_3O_4$, $Cr_2O_3$ and CuO were observed by X-ray diffraction ${\theta}-2{\theta}$ scans. From the optical transmission analysis, cobalt existed as $ Co^{2+}$ in tetrahedral coordination, chromium as $Cr^{6+}$ in tetrahedral symmetry and copper as $Cu^{2+}$ in octahedral coordination. Films with a crack-free and no texture exhibited homogeneous interfaces between the films and the substrates along the cross-section.