• Composites Research
• /
• v.22 no.4
• /
• pp.33-40
• /
• 2009

Fiber orientation effects on the impact surface fracture of the glass plates coated with the glass fiber/epoxy lamina layer were investigated using a small-diameter steel-ball impact experiment. Four kinds of materials were used: soda-lime glass plates, unidirectional glass fiber/epoxy layer(one ply, two plies)-coated, crossed glass tiber/epoxy layer (two plies)-coated glass plates. The maximum stress and absorbed fracture energy were measured on the back surface of glass plates during the impact. With increasing impact velocity, various surface cracks such as ring, cone, radial and lateral cracks appeared near the impacted site of glass plates. Cracks in the plate drastically diminished by glass fiber coating. The tiber orientation guided the directions of delamination and plastic deformation zones between the tiber layer and the glass plate. Impact surface-fracture indices expressed in terms of the maximum stress and absorbed energy could be used as an effective evaluation parameter of the surface resistance.

• Journal of the Korean Society of Safety
• /
• v.10 no.2
• /
• pp.129-133
• /
• 1995

A new approach to the analysis of thin. rectangular window giass glass supported on flexible gaskets. and subjected to uniform lateral pressures was evolved. Based on the Von Karman theory of plates and using the finite difference method. a computer program which determines the deflections and stresses in simply supported thin glass plates was developed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1997.07a
• /
• pp.88-88
• /
• 1997

• Composites Research
• /
• v.26 no.4
• /
• pp.230-234
• /
• 2013

The continuous glass fiber reinforced poly-lactic acid (PLA) composite was manufactured by direct melt impregnation. The mechanical and thermal properties of continuous glass fiber reinforced PLA composite were observed. Measured properties were compared with the reference values of neat PLA and the injection molded glass fiber/ PLA composite. The continuous glass fiber reinforced PLA composite having a fiber volume fraction of 27.7% shows enhanced tensile strength of 331.1 MPa, flexural strength of 528.6 MPa, and flexural modulus of 24.0 GPa. The enhanced heat deflection temperature (HDT) and the increased cystallinity were also observed. The degree of impregnation as a function of pulling speed was also assessed. The degree of impregnation at the pulling speed of 5 m/min was over 90% in this research.

• Composites Research
• /
• v.34 no.5
• /
• pp.305-310
• /
• 2021

Mechanical properties of fiber reinforced composites were affected to fiber volume fractions (FVF) and interfacial property by sizing agent conditions. An optimum interface can relieve stress concentration by transferring the mechanical stress from the matrix resin to the reinforcements effectively, and thus can result in the performance of the composites. The interfacial properties and wettability between the epoxy resin and glass fiber (GF) were evaluated for different sizing agent conditions and FVFs. The surface energies of epoxy resin and different sizing agent treated GFs were calculated using dynamic and static contact angle measurements. The work of adhesion, W_a was calculated by using surface energies of epoxy matrix and GFs. The wettability was evaluated via the GF tow capillary test. The interfacial shear strength (IFSS) was evaluated by microdroplet pull-out test. Finally, the optimized GFRP manufacturing conditions could be obtained by using wettability and interfacial property.

• Magazine of the Korea Concrete Institute
• /
• v.5 no.3
• /
• pp.187-194
• /
• 1993

본 논문에서는 유리섬유의 적층수, 유리섬유의 배향각도에 대한 유리섬유 강화 플라스틱(Glass Fiber Reinforced Plastics ; GFRP)의 인장거동 변화를 고찰하고, 이들의 상관관계를 규명하기 위하여 일련의 GFRP 시험체에 대하여 인장실험을 수행하였다. 시험체는 폭12.5mm, 길이 60mm크기로 일정하게 제작하였으며, 시험체에 대하여 인장실험을 수행하였다. 시험체 제작시 유리섬유로 적층수는 14, 22, 30층, 유리섬유의 배향각도는 0$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$로 하였다. 인장실험시 각 시험체의 파괴양상, 극한하중 및 하중변화에 대한 인장변형율을 조사하였고, 이들 결과를 토대로 유리섬유의 적층수와 배향각도에 따른 GFRP의 극한하중, 응력-변형율 선도 및 탄성계수 등을 비교 분석하였다. 한편 본 논문에서는 유리섬유의 적층수, 직경 변화에 따른 GFRP관의 파괴거동을 고찰하기 위하여 4점 재하법에 의한 GFRP관의 휨파괴실험을 수행하였다. 실험에 사용된 시험체는 길이 1200mm로 하였으며, 유리섬유의 적층수를 30, 35, 40층, 관의 직경을 50, 100, 150mm로 하였다. 파괴실험시 각 시험체의 하중변화에 대한 휨 변형율, 중앙점 처짐량 및 항복하중을 측정하였고, 이들 결과를 토대로 유리섬유으 적층수와 관의 직경에 따라 GFRP관의 항복하중 및 파괴에너지를 비교 분석 하였으며, 항복시 파괴에너지를 추정할 수 있는 제안식을 유도하였다.

• Restorative Dentistry and Endodontics
• /
• v.33 no.1
• /
• pp.28-38
• /
• 2008

This study was to investigate the influence of composite resins with different elastic modulus, cavity modification and occlusal loading condition on the stress distribution of restored notch-shaped noncarious cervical lesion using 3-dimensional (3D) finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity and a modified cavity with a rounded apex were modeled. Unmodified and modified cavities were filled with hybrid or flowable resin. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. The results were as follows: 1. In the unrestored cavity, the stresses were highly concentrated at mesial CEJ and lesion apex and the peak stress was observed at the mesial point angle under both loading conditions. 2. After restoration of the cavity, stresses were significantly reduced at the lesion apex, however cervical cavosurface margin, stresses were more increased than before restoration under both loading conditions. 3. When restoring the notch-shaped lesion, material with high elastic modulus worked well at the lesion apex and material with low elastic modulus worked well at the cervical cavosurface margin. 4. Cavity modification the rounding apex did not reduce compressive stress, but tensile stress was reduced.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.3
• /
• pp.49-53
• /
• 2022

Ultra-thin glass (UTG) has been widely used in foldable display as a cover window for the protection of display and has a great potential for rollable display and various flexible electronics. The foldable display is under impact loading by bending and touch pen and exposed to other external impact loads such as drop while people are using it. These external impact loads can cause cracks or fracture to UTG because it is very thin under 100 ㎛ as well as brittle. Cracking and fracture lead to severe reliability problems for foldable smartphone. Thus, this study constructs finite element analysis (FEA) model for the pen drop test which can measure the impact resistance of UTG and conducts mechanical modeling to improve the reliability of UTG under impact loading. When a protective layer is placed to an upper layer or lower layer of UTG layer, stress mechanism which is applied to the UTG layer by pen drop is analyzed and an optimized structure is suggested for reliability improvement of UTG layer. Furthermore, maximum principal stress values applied at the UTG layer are analyzed according to pen drop height to obtain maximum pen drop height based on the strength of UTG.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.204-204
• /
• 2009

적외선 광투과 칼코게나이드 유리를 성형온도, 단위공정시간, 서냉 시 가압력등 성형조건을 변화시키면서 고온압축성형하였다. 성형된 칼코게나이드 유리렌즈의 특성평가를 위해 성형조건에 따른 렌즈깨짐 현상, 성형렌즈의 결정성 및 투과도를 측정하였다. 성형과정에서의 내부응력과 소재 자체의 낮은 경도로 인해 성형조건에 따른 렌즈깨짐 현상이 발생하였으며, 고온압축성형시 성형온도 범위 ($330{\sim}340^{\circ}C$)와 단위공정시간(100초~200초) 조건 변화에 따른 성형 렌즈의 광투과도 및 결정성 차이는 나타나지 않았다. 본 연구를 통해 칼코게나이드 유리 소재의 고온압축 성형성을 확인하여 적외선 광학계 렌즈로써의 적용 가능성을 확인 할 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.151-162
• /
• 1998

ZnO-BaO-$SiO_2-Al_2O_3$계 유리 및 결정화 유리 시편들을 제조하여 평판형 고체산화물 연료전지 봉착재로의 이용가능성을 조사하였다 구성층과 일치되는 열팽창 계수 및 화학적 안정성을 봉착재로의 적용에 있어 판단 기준으로 정하였다 실험된 다양한 조성의 유리 및 결정화 유리 시편들중 7.79ZnO-58.52BaO-$28.69SiO_2-5Al_2O_3$(ZBS3-A5) 결정화 유리의 측정된 열팽창 계수값은 $11.02\times10^{-6/^{\circ}C}$로써 YSZ 및 LSC의 평균 열팽창 계수 값과의 차이가 $0.07\timestimes10^{-6/^{\circ}C}$로 매우 작아 봉착시 열응력 발생의 최소화를 기대할수 있었다 이런 ZBS3-A5+LSC 접합 couple의 경우는 ZnCr2O4 의 dis-crete한 입자가 결정화 유리 부위에 형성되었고 역시 시간의 증가에 따라 이러한 입자의 성장은 없었다 특히 ZBS3-A5 구성 성분인 Ba, Zn, Sil 그리고 Al의 YSZ 및 LSC로의 확산은 없어 봉착후에 YSZ 및 LSC의 전기적 특성에 악영향을 미치지 않으리라 판단되었다.