• 한국기계가공학회지
• /
• 제19권6호
• /
• pp.36-42
• /
• 2020

Nowadays, the touch screen panel (TSP) cover glass for mobile smart devices is being developed with a curved glass shape due to different design requirements. Because the sizes of mobile smart devices continue to increase, there has also been a great increase in the demand for large-area curved glass greater than 20 inches. In this study, heat and fluid flow analysis using CFD was performed to optimize the heating surface temperature distribution of the large curved glass formation system. Five cooling water flow paths in the cooling block were designed and analyzed for each case. A function that can quantitatively calculate the temperature uniformity of the heating surface was proposed and these values were obtained for the five models. The temperature distributions of the heating surface and the energy consumption of the heating system were also compared and comprehensively analyzed. Based on the analysis results of the five different cooling channel path models, the optimal path design could be presented.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.7-12
• /
• 2012

Ceramic core processing technology using 5-axis high-speed cutting machine is applied to make the glass molds for aspherical ophthalmic lenses. In the technology, optimum processing conditions for aspherical ceramic molds are based on minimal experimental data of surface roughness. Such surface roughness is influenced by fabricating tools, cutting speed, feed rate, and depth of cut, respectively. In this paper, we present that surface roughness and shape accuracy of aspheric ceramic mold obtained by optimum processing conditions are Pa $0.6184{\mu}m$ and Pt $5.0301{\mu}m$, respectively, and propose that these values are sufficiently possible to apply to making the glass molds for aspherical ophthalmic lenses.

• 한국기계가공학회지
• /
• 제19권6호
• /
• pp.43-48
• /
• 2020

This study explores the compression molding of diffractive-aspheric lenses using GeSbSe chalcogenide glasses. A mold core with diffractive structure was prepared and a chalcogenide glass lens was molded at various temperatures using the corresponding core. The effect of molding temperature on the transcription characteristics of diffractive structure was examined, by measuring and comparing the diffractive structure between the mold core and the molded chalcogenide glass lens using a microscope and a white light interferometer. In addition, the applicability of the molded lens for thermal imaging was evaluated, by measuring the form error.

• 한국광학회지
• /
• 제10권3호
• /
• pp.208-213
• /
• 1999

반도체 및 박막의 두께 측정에 많이 이용되는 분광 타원해석기의 입사각을 정밀하게 보정하기 위한 방법을 제안하고 이를 실험적으로 확인하였다. 몇 종류의 광학유리를 이용하여 프리즘과 기판을 가공하였다. 프리즘의 꼭지각과 최소 벗어나 기각을 측정해 광학유리의 굴절률을 결정하였고 브루스터각(Brewster's angle)에서 측정한 유리기판의 타원해석 스펙트럼을 분석하기 위한 기준값으로 이 굴절률을 사용하여 분광 타원해석기의 입사각을 0.01도의 정밀도로 결정,보정하였다.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1499-1505
• /
• 2010

유연성 공구를 가진 자기연마는 고경도 소재 및 자유곡면 형상 표면의 나노메터급 가공이 가능한 강점을 지닌다. 이러한 자기연마에서 자기연마입자는 시간적, 비용적 측면에서 단순 혼합형 입자가 유리하다. 그러나 단순혼합형 입자는 가공 중 공구로부터 쉽게 이탈하게 되어 가공 시간이 증가 할수록 매우 낮은 가공 효율을 가진다. 따라서 본 연구에서는 단순 혼합형 입자에 오일을 대신하여 실리콘 겔을 매개물로 사용하는 자기연마 입자를 연구하고 그 특성을 분석하였다. 그 결과 자기력 향상과 별개로 입자간 응집력을 높여 입자의 이탈을 줄여 표면거칠기의 향상에 효과가 높음을 확인 하였다. 그리고 실험계획법을 이용하여 고경도 소재인 텅스텐 카바이드의 실리콘 겔 자기연마에서 각 공정변수가 표면거칠기의 향상에 미치는 특성을 평가하고 이를 최적화 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.681-684
• /
• 2005

The old technique of sandblasting which has been used for paint or scale removing, deburring, and glass decorating has recently been developed into a powder blasting technique for brittle materials, capable of producing micro structures larger than 100um. A large number of Investigations on the abrasive jet machining with output parameters as material removal rate, penetrate and surface finish have been carried out and reported by various authors. In this paper, we investigated the effect of surface characteristics and surface shape of the abrasive jet machined glass surface under different blasting parameter. and finally we established a model for abrasive flow machining process, and compared with experimental results.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.28-34
• /
• 2004

The old technique of sandblasting which has been used for decoration of glass surface has recently been developed into a powder blasting technique for brittle materials such as glass, silicon and ceramics, capable of producing micro structures larger than 100${\mu}{\textrm}{m}$. In this study, we introduced oblique powder blasting, and investigated the effect of the impacting angle of particles, the scanning times and the stand-off distance on the surface roughness and the weight-loss rate of samples with no mask, and the wall profile and overetching of samples with different mask pattern in powder blasting of soda-lime glass. The varying parameters were the different impact angles between 50$^{\circ}$ and 90$^{\circ}$, scanning times of nozzle up to 40 and the stand-off distances 70mm and 100mm. The widths of mask pattern were 0.2mm, 0.5mm and 1mm. The powder was alumina sharp particles, WA #600. The mass flow rate of powder during the erosion test was fixed constant at 175g/min and the blasting pressure of powder at 0.2Mpa.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.12-15
• /
• 2002

In this paper, we fabricated a electro-chemical discharge machine for drilling microscopic glass hole. In this research, we used a glass plate and NaOH solution. From the experimental result, we knew that the change of voltage wave was caused by drilling microscopic hole of glass using electro-chemical discharge method. So, we can give a function of the power auto stop to electro-chemical discharge machine with the change of voltage wave.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.36-39
• /
• 2004

Glass molding is an advantageous method to manufacture glass micro optical components. However, it is difficult to make Tungsten Carbide core for glass microlens array. We have developed novel method to fabricate Tungsten Carbide core for micro glass components using pressure forming. Silicon masters were fabricated by micro machining. Tungsten Carbide core was fabricated by pressure forming and sintering. And we made high quality surface of Tungsten Carbide core by using the magnetic-field-assisted polishing process.

• 대한기계학회논문집B
• /
• 제26권12호
• /
• pp.1639-1645
• /
• 2002

Micro engine that includes Micro scale combustor is fabricated. Design target was focused on the observation of combustion driven actuation in MEMS scale. Combustor design parameters are somewhat less than the size recommended by feasibility test. The engine structure is fabricated by isotropic etching of the photosensitive glass wafers. Electrode formed by electroplating of the Nickel. Photosensitive glass can be etched isotropically with almost vertical angle. Bonding and assembly of structured photosensitive glass wafer form the engine. Combustor size was determined to be 1 mm scale. Movable piston is engraved inside the wafer. Ignition was done by nickel spark plug which was electroplated with thickness of 40 ${\mu}{\textrm}{m}$. The wafers were bonded by epoxy that resists high temperature. In firing test due to the bonding method and design tolerance pressure buildup by reaction was not confirmed. But ignition, flame propagation and actuation of micro structure from the reaction was observed. From the result basement of design and fabrication technology was obtained.