• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.3
• /
• pp.47-58
• /
• 2020

In this study, a thrust modulation through oxidizer mass flow rate control and internal ballistic analysis based on Whitmore and Chandlers' models was conducted on a blow-down hybrid rocket using nitrous oxide. The tank pressure prediction considering mass flow rate control of the self-pressuring oxidizer was conducted, and the results showed good agreements with experimental results. In order to verify the internal ballistic analysis, a ground combustion test using a 500 N class hybrid rocket was conducted, and it was confirmed that the experimental results and the analytical results were quite consistent in the chamber pressure and thrust, thereby, a modeling technique capable of predicting the thrust modulation performance is proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.797-803
• /
• 2012

Proportional solenoid valves are a modulating type that can control the displacement of valves continuously by means of electromagnetic forces proportional to the solenoid coil current. Because the solenoid-type modulating valves have the advantages of fast response and compact design over air-operated or motor-operated valves, they have been gaining acceptance in chemical and power plants to control the flow of fluids such as water, steam, and gas. This paper deals with the auto tuning of the position controller that can provide the proportional and integral gain automatically based on the dynamic system identification. The process characteristics of the solenoid valve are estimated with critical gain and critical period at a stability limit based on implemented relay feedback, and the controller parameters are determined by the classical Ziegler-Nichols design method. The auto-tuning algorithm was verified with experiments, and the effects of the operating point at which the relay control is activated as well as the relay amplitude were investigated.

• JOURNAL OF ELECTRICAL WORLD
• /
• no.4 s.112
• /
• pp.99-103
• /
• 1986

인버터는 전동기의 전원주파수를 변화시킴으로써 용이하게 표준 유도전동기 회전수의 제어가 가능하기 때문에 각종 산업설비의 전동기 속도제어 또는 유량제어에 의한 에너지절약을 목적으로 하고 또한 최근의 저가격화도 수반되어 그 보급이 현저하다. 그런데 인버터 사용시에는 통상의 전동기 운전시와는 다른 여러 가지 현상이 나타난다. 따라서 적용할 때에는 이와 같은 상황을 잘 이해하여 적절하게 적용해야 된다. 여기서는 인버터의 전동기 회로에의 적용상황의 개요와 사용할 때의 유의사항에 대하여 해설한다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.389-394
• /
• 2002

1) HTST공정에 적합한 공정감시 및 제어알고리즘을 개발하였고, 일련의 모든 프로그램은 G언어의 일종인 Labview 5.1을 사용하였다. 프로그램상에는 온도, 압력, 유량을 표시하는 아날로그 및 디지털 창을 마련하여 장치내부의 상태를 쉽게 파악학 수 있도록 하였다. 2) 살균온도를 9$0^{\circ}C$로 설정하였을 때 온도제어 오차는 0.05$^{\circ}C$였으며 이것은 Negiz와 Cinar(1995)의 온도제어 오차 0.22$^{\circ}C$보다 정밀한 제어가 이루어짐을 알 수 있었다. 3), 운전중 원료의 과살균을 방지하지 하기 위해 각 각의 경우에 스팀온도를 제어하였고 목표온도까지 가열하기 위한 각 유량과 초기온도별 스팀온도를 구하였다. 4) 본 연구의 이 후 과제로는 유량의 변화에 따른 홀딩튜브의 길이와 살균시간의 상관관계를 규명하여 실제 HTST공정에 적용될 수 있는 수학적 모델링을 구현해야 할 것으로 생각된다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.717-722
• /
• 2011

This paper presents that the electronic controller is developed for controlling the setting temperature and water in the ceramic pipe system. The heating water system is designed for controlling the temperature to supply the heat through the ceramic pipe heater to input the water, also for controlling quantity of water using the water sensor and impeller. The control method of the heating water system is applied the mathematic modeling of the ceramic pipe heater on the suppling the heat at coming water, and the test result of the electronic controller is present to smartly control the setting temperature, therefore the ceramic pipe heater is proposed to be able to apply the heating structure and the control methods as a product.

• Journal of Biomedical Engineering Research
• /
• v.23 no.5
• /
• pp.391-395
• /
• 2002

Shunt valves used to treat patient with hydrocephalus were numerically simulated to investigate influence of pressure pulsation on their flow control characteristics. We modeled flow orifice through the shunt valve and imposed pulsating pressure and valve diaphragm movement to compute flow through the valve. The results of our study indicated that flow rates increased more than 40% by introducing pressure pulsation and diaphragm movement on the shunt valve. Our results demonstrate the pressure-flow control characteristics of shunt valves implanted above human brain may be quite different from those obtained by syringe pump test just after manufacture that induces uniform pressure.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1680_1681
• /
• 2009

복잡한 이론적인 지식이 없어도 대상 발전소의 운전데이터를 밸브의 유량특성 관계 값에 지정함으로써 쉽게 모델링할 수 있도록 터빈제어 밸브 모델을 구현하였다. 또한 제어밸브의 여러 가지 동작 특성을 입력할 수 있는 사용자 인터페이스를 구현하였다. 이렇게 구현된 모델을 사용하여 직접 터빈제어시스템과 연계하여 모의시험 하였으며 만족스러운 결과를 보여주었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.734-739
• /
• 2016

The globe valve is a linear motion valve that is designed primarily to stop, start, and regulate flow. The disk of a globe valve can be removed totally from the flow path or it can completely close the flow path. In this study, numerical analysis using ANSYS-CFX was initially performed to predict the flow coefficient and build a prototype model of a globe valve. The flow coefficient is the volume of water at $15.6^{\circ}C$ that will flow per minute through a valve with a pressure drop of 1 psi across the valve. In other words, it is an important factor for determining the size of the valve. From the analysis results, the fluid flux of water and flow coefficient of the valve were extracted. From the numerical results, a prototype of ultra-fine precision control valve, which can regulate the fluid flow of range 0 ~ 0.1 gal per min, was developed. The experimental results were compared with the numerical results using the flow coefficient ($C_v$) graph. From the comparative results, the flow coefficient ($C_v$) error percentage between the numerical and experimental results was very low, which is acceptable, proving that the proposed prototype model is convincing. In addition, it is possible to predict the flow coefficient using only numerical analysis.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.7 no.1
• /
• pp.32-37
• /
• 2011

In this study, control characteristics and energy performance with flow rate control methods were reviewed with the simulation. The heating system is classified such as fan coil unit and HVAC system currently used in buildings with valve control and pump inverter control. The simulation analysis program is made by TRNSYS ver. 15 with the actual data. As a result of this study, the central heating system with pump inverter control decreases electricity energy and reduces gas consumption. Inverter control method shows better performance in comparison with valve control one for energy saving.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.4 no.4
• /
• pp.8-14
• /
• 2007

The electro-hydraulic pump is usually used in testing equipments which require one control function. But until now, it is not applied to industrial equipments which are exposed to severe working environment and require various control functions. This paper proposes a technique which controls continuously flow, pressure and power by utilizing switching control mode. Mathematical model is developed from the continuity equation for the pressurized control volume and the torque balance for the swash plate motion. To simplify the model we make the linear state equation by differentiating the nonlinear model. We analyze the stability and disturbance by using the state variable model. Finally, we review the control performances of flow, pressure and power by tests using PID controller.