• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.6
• /
• pp.532-540
• /
• 2001

The objectives of this study are to analyze the control variables according to condensation occurrence, to find the range in floor surface temperature and frequency of condensation, and to evaluate the control methods through simulations when the radiant heating system is used for cooling. Through the simulation analysis the control methods such as on/off control, variable flow control and outdoor reset with indoor temperature feedback control are evaluated and compared. The results show that the lowest floor surface temperature is around $23^{\circ}C$, the surface condensation can be prevented by controlling indoor humidity within 20g/kg(DA0, and that outdoor reset with indoor temperature feedback control is more appropriate than on/off control and variable flow control with regard to prevention of the condensation and thermal comfort.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.04a
• /
• pp.103-112
• /
• 2006

제지 기계의 습부 공정을 안정화시키고, 또한 종이의 지필도에 악영향을 끼치지 않으면서 종이의 기계방향 물성의 변이를 줄이기 위해서, 보류도와 지필도 공정을 동시에 제어하기 위한 제어전략들이 개발되었다. 보류도와 지필도에 미치는 주 변수들에 관한 연구를 양이온성팜(CPAM)/벤토나이트 보류제와 파일럿 제지 기계를 사용하여 수행하였다. 마이크로파티클 보류제 첨가량이 보류도와 지필도에 미치는 영향을 설명하기 위해서 deposition efficiency 모델과 bridging strength 모델을 개발하였다. 제지 기계 보류 공정의 동특성 모델을 질량수지분석을 사용해서 개발하였다. 지료화학 변수의 효과를 모델에 포함하기 위해서, 보류도를 작업조건들에 의존하는 변수로 모델에 포함시켰다. 또한 지필도의 실험적 모델을 개발하고 보류공정을 위한 동특성 모델들과 연계해서 지필도의 동특성을 모사하였다. 여러 제어 전략들이 시뮬레이션상에서 실험되어졌다. 평량과 종이의 회분율 대신에 종이내의 펄프 질량과 충전제 질량을 제어하면 decouper를 사용하지 않고도 두 제어 루프간 상호작용을 줄일 수 있음을 보였다. 지필도의 제어를 위해서, 헤드박스 펄프 농도제어와 폴리머유량과 벤토나이트 유량의 비율제어를 제안하였다. 지종 변경시 백수농도의 설정값을 계산하는 문제를 해결하였다. 또한, 평량, 회분율, 백수농도 및 헤드박스 펄프 농도의 다변수제어가 논의되었다.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.126-133
• /
• 2006

This paper deals with technological and design skills for all pneumatical, hydraulical, mechanical and electrical parts related to control valve. Especially, a variety of dynamic characteristics, which are not easily extracted from field tests using control valves, are studied by system-simulation code, AMESim. The simulated results are also compared and examined with actual testing results in terms of physical dynamic characteristics. In addition, this paper contains the simulated system characteristics including dynamic characteristics in component level of valve itself. Based on the results, it is applied to control system of propellant feeding system in liquid-propellant engine of satellite launcher.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.151-160
• /
• 2000

An experimental and theoretical analysis for the improvement of dynamic characteristics and design of electro-hydraulic flow control servo valve are performed. The theoretical results are compared with the experimental step responses, and the important design parameters of an electro-hydraulic flow control servo valve are derived by using the simulation program. Simulation parameters of nozzle jet coefficient and orifice and spool valve discharge coefficient are given through experiment. The theoretical and experimental step response curves show that the valve gain depends on the fixed orifice and nozzle $ratio(R_on)$ and is maximum at $R_on=1.$ And drain orifice in the flapper - nozzle return line creates a small back pressure, which improves the performance fur the valve.

• 한국전산유체공학회:학술대회논문집
• /
• 2002.05a
• /
• pp.146-151
• /
• 2002

Characteristics of flow rate control has been studied for a cavitating venturi adopted in a liquid rocket propellant feed system. Numerical simulation has been peformed to give about $10\%$ discrepancy of mass flow rate to the experimental data for cavitating flow regime. Mass flow rate is confirmed to be saturated for pressure difference higher than $3\times10^5$pa when the upstream pressure is fixed to $22.8\times10^5$pa and the downstream pressure is varied. The evaporation amount depends substantially to non-condensable gas concentration. However the mass flow rate characteristic is relatively insensitive to the mass fraction of non-condensable gas. So it is reduced by only $2\%$ when the non- condensable gas concentration is increased from 1.5PPM to 150PPM. From the previous comparison the expansions of the non-condensable gas and the evaporation of liquid are verified to have same effect to pressure recovery.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.5
• /
• pp.17-23
• /
• 1995

A numerical analysis on engine coolant is made by the use of FVM based general purpose 3 dimensional Navier-Stokes solver, TURB-3D. Numerical solutions are verified by comparison with the experimental data of Lotus model. The results show a good qualitative as well as quantitative comparison. Coolant flow rate control is attempted through adjusting the cross section area of passage base on the results of an original coolant passage. It is concluded from the results that the flow rate control is possible as attempted, and thus can be used in the real engine design.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.929-935
• /
• 2018

This paper develops a flow control block for a hydraulic system of a tunnel boring machine. The flow control block is a necessary component to ensure stability in the operation of the hydraulic system. In order to know the pressure distribution of the flow control block, the flow analysis was performed using the ANSYS-CFX. It was confirmed that the pressure and flow rate were normally supplied to the hydraulic system even if one of the four ports of the flow control block was not operated. In order to evaluate the structural stability of the flow control block, structural analysis was performed using the ANSYS WORKBENCH. As a result, the safety factor of the flow control block is 1.54 and the structural stability is secured.

• 전기의세계
• /
• v.41 no.2
• /
• pp.31-39
• /
• 1992

고도의 시스템 기술이 요구되는 현대 산업사회에서 자동제어 기술의 핵이 되는 센서기술의 발전없이는 균형잡힌 산업성장이 이루어질 수 없으며 기술선진국으로의 도약도 기대할 수 없다. 우리나라에서는 다른 분야에 비해 센서기술은 많이 낙후되어 있으며 특히 유속센서에 대한 연구는 거의 이루어지지 않고 있다. 그런데, 유속 및 유량 측정은 산업 계측중에서 중요한 분야중의 하나이며 최근에는 에너지 절약 기술이나 각종 첨단 기술에서의 수요가 급격히 증가하고 있다. 그리고 유속 및 유량의 정확한 측정은 에너지 절약의 측면에서도 중요하다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.132-132
• /
• 2003

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.4
• /
• pp.488-493
• /
• 2008

A mathematical model of molten steel level for continuous casting process is presented, where the molten steel level, input and output flow in the mold, the relation between stopper position and input flow etc. are considered. The mathematical model is implemented and simulated by using MATLAB. Comparing the result of molten steel level from the simulator with that of real plant, the performance of the model is shown to be reasonable. By using this simulator, it is shown that PI controller with variable P gain, adjusted by fuzzy logic system, has better control result than conventional PI controller.