• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.570-571
• /
• 2014

차량의 고속 주행 시 운전자가 인지하게 되는 공력소음은 대부분 차량 전방부의 A 필라 부근에서 발생하는 소음원에 의해 전달된다. A 필라 부근에는 다양한 모양의 돌출물들이 부착되어 있어서 차량 주변의 고속의 유동과의 상호 작용에 의해 다양한 공력 소음이 발생하게 된다. 이러한 차량 전방부의 대표적인 소음 인자인 A 필라 형상에 의한 와류 및 아웃사이드 미러에 의한 유동 구조 변화에 의한 실내 투과 소음에 대해 실험 및 소음원 분석을 수행하였다. 차량 내외부의 복잡한 구조와 재질에 의한 영향을 최소화 하고자 실차 형상 및 실내 조건을 간략화 시킨 차량 단순 모델을 이용해서 A 필라 주변부의 형상에 의한 주요 주요 공력 소음 인자에 대해 기여도를 분석했으며, 실험 결과는 다양한 CAE S/W 의 실내음 예측 결과의 정밀도를 분석하기 위해 사용되었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.5
• /
• pp.109-117
• /
• 2002

An off-surface flow visualization experiments have been performed to investigate the flow field over a delta wing with the leading edge extension(LEX). The model is a flat wing with $65^{\circ}$ sweepback angle. The free stream velocity is 6.2 m/s, which corresponds to Reynolds number of $4.4\times10^5$ based on the wing root chord. The angle of attack and sideslip angle range from $16^{\circ}\sim28^{\circ}$ and $0^{\circ}\sim-15^{\circ}$, respectively. The visualization technique of using the micro water-droplet and the laser beam sheet enabled to observe the vortical flow structures, which can not be obtained by 5-hole probe measurements. With sideslip angle, the interaction and breakdown of the LEX and wing vortices was promoted in the windward side, whereas, it was suppressed in the leeward side.

• Journal of Korea Water Resources Association
• /
• v.40 no.6 s.179
• /
• pp.431-446
• /
• 2007

Groundwater flow in a basin is greatly affected by many hydrogeological and hydrological characteristics of the basin. A groundwater flow model for the Kap-cheon basin ($area=648.3km^2$) in the Geum river basin was established using MODFLOW by fully considering major features obtained from observed data of 438 wells and 24 streams. Furthermore, spatial groundwater recharge distribution was estimated employing accurately calibrated watershed model developed using SWAT, a physically semi-distributed hydrological model. Model calibration using observed groundwater head data at 86 observation wells yielded the deterministic coefficient of 0.99 and the water budget discrepancy of 0.57%, indicating that the model well represented the regional groundwater flow in the Kap-cheon basin. Model simulation results showed that groundwater flow in the basin was strongly influenced by such factors as topological features, aquifer characteristics and streams. The streams in mountainous areas were found to alternate gaining and losing steams, while the streams in the vicinity of the mid-stream and down-stream, especially near the junction of Kap-cheon and Yudeong-cheon, areas were mostly appeared as gaining streams. Analysis of water budget showed that streams in mountainous areas except for the mid-stream and up-stream of Yudeong-cheon were mostly fed by groundwater recharge while the streams in the mid and down-stream areas were supplied from groundwater inflows from adjacent sub-basins. Hence, it was concluded that the interactions between surface water-groundwater in the Kap-cheon basin would be strongly inter-connected with not only streams but also groundwater flow system itself.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1161-1170
• /
• 2011

This paper presents a solution to the inverse problem for the service boundary conditions of thermal-flow and structure analysis in a catalyst substrate. The exhaust-gas purification efficiency of a catalyst substrate is influenced by the shape parameter, catalyst ingredients and so on and is estimated by the thermal flow uniformity. The formulations of the inverse problem of obtaining the thermal-flow parameters (inlet temperature, velocity, heat of reaction, convective heat-transfer coefficient) and the direct problem of estimating from a given outlet temperature distribution are described. An experiment was designed and the response-surface optimization technique was used to solve the proposed inverse problem. The temperature distribution of the catalyst substrate was obtained by thermal-flow analysis for the predicted thermal-flow parameters. The thermal stress and durability assessments for the catalyst substrate were performed on the basis of this temperature distribution. The efficiency and accuracy of the inverse approach have been demonstrated through the achievement of good agreement between the thermal-flow response surface model and the results of experimental vehicle tests.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.14-14
• /
• 1998

램제트 엔진은 초음속에서 공기가 충격파를 통해 아음속으로 속도가 낮아지고 압력이 증가하는 램 압축 현상을 이용하되 압축기를 사용하지 않고 아음속 상태에서 연소하는 구조로 되어 있다. 따라서 각 부품의 성능은 독립적이지 않으며 전체적인 성능을 규명하기 위해서는 공기 흡입구와 연소실, 연료 분사체계 등의 상호작용을 고려하여 유동의 특성과 그에 따른 연소현상의 특성을 함께 고려해야만 한다. 본 연구에서는 속도 범위 Mach 5이내, 고도 30km이내의 운항조건을 갖는 유도 무기에 장착될 램제트 엔진 개발을 위한 연구의 첫 번째 단계로써, 램제트 연소실내의 유동장해석을 실험과 수치해석 두 분야로 나누어 수행하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.304-309
• /
• 1996

차세대원자로(KNGR) 안전주입계통은 원자로용기 하향유로(RVDC)로 직접주입(DVI)되도록 설계되며 이는 4-트레인 안전주입계통의 설계에 있어 고유한 기본구조이다. DIV 채택으로 인해 가압열충격(PTS)과 관련된 인허가 상의 관심사론 조사하고 DVI 주입구 위치에 대한 RVDC에서의 유체거동과 온도분포를 상용전산코드인 FLOW3D를 이용하여 분석하였다. PTS관점에서 가장 최악의 경우인 외부 전원상실을 동반한 영출력 주증기관 파단사고를 해석대상으로 하였으며 사고후 570 ~ 600초 사이의 과도상태를 분석하였다. 본 연구의 결과로 주증기관 파단으로 야기되는 자연순환에 의한 열혼합은 충분히 이루어져 RVDC에서의 온도가 R $T_{PTS}$ 이상임을 확인했고 손상루프측 위의 DVI 주입구의 유동중 일부가 손상루프측 저온관 유동과 상호작용하여 건전루프측 저온관아래로 흐르며 이 영향으로 건전루프측 저온관 아래에서의 온도가 국부적으로 감소함을 확인하였다.다.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.2
• /
• pp.1-9
• /
• 2004

As the first step to investigate the nonlinear interactions between turbulence and marine structures inside a viscous NWT, a LES technique was applied to solve the turbulent channel flow for =150. The employed turbulence models included 4 types: the Smagorinsky model, the Dynamic SGS model, the Structure Function model, and the Generalized Normal Stress model. The simulated data in time-series for the LESs were averaged in both time and space, and statistical analyses were performed. The results of the LESs were compared with those of a DNS, developed in the present study and two spectral methods by Yoon et al.(2003) and Kim et a1.(1987). Based on this research, the accuracy of LESs has been found to be still related to the number of grids for fine grid size).

• Journal of the Korean Society of Visualization
• /
• v.21 no.1
• /
• pp.40-46
• /
• 2023

For application to drag-based propulsion system, the dynamics of a segmented structure with multiple hinges undergoing oscillatory motion are investigated. The side flaps are connected to a centre rod with elastic plates acting as hinges. The hinges bend to only one direction so that the structure behave asymmetrically between the power stroke and the recovery stroke. An analytical model is proposed, which estimates the asymmetric deformation of the segmented structure coupled with hinges. Using the proposed model, the effects of key geometric and kinematic parameters on the dynamics of the structure are analyzed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.47-53
• /
• 2017

A boundary layer integral combined with a 1-D isentropic core flow model has been successfully used to determine heat transfer rate on the surface of a supersonic nozzle. However its accuracy is affected by the core flow condition which is used as a boundary condition for the integral calculation. Because flow behavior near a nozzle throat deviates from 1-D isentropic condition due to 2-D flow turning and interaction between core flow and boundary layer, accuracy of heat transfer calculation decreases at a nozzle throat. Therefore, CFD is adopted to deduce improved core flow condition and increase accuracy of boundary layer integral at nozzle throat in this research. Euler model and SST $k-{\omega}$ model is solved by CFD code and used as a boundary condition for boundary layer integral. Developed code is tested in the supersonic nozzle from the previous research and improvement in accuracy is observed, especially at nozzle throat and diverging section of the nozzle. Error between experimental result and calculation result reduced by 16% when a calculation is made based on the SST $k-{\omega}$ model. Method developed in this research is expected to be used in thermal design of the rocket nozzle.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.4
• /
• pp.33-42
• /
• 2014

Flame behaviors and interaction between pilot and main flames in a dual swirl combustor were investigated experimentally and numerically. Under the condition of fixed swirl angle of $45^{\circ}$ for main flame, the swirl angle of pilot flame, total heat release rate and equivalence ratio of main flame were used as major parameters. As a result, detailed flame stability diagram of dual swirl combustor was identified in terms of 5 flame modes with the changes in total heat release rate and equivalence ratio of main flame. It was found that the swirl angle of pilot flame plays the most important role in the changes in flame location and overall flow structure inside the combustor, and thus leads to the significant change in the interaction between pilot and main flame.