• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.307-312
• /
• 2020

Fluidized bed reactors operated in subatmospheric pressure has been focused because several industrial applications such as vacuum drying and plasma cvd requires reduced pressure fludization. However, the hydrodynamics of fluidized beds in subatmospheric pressure has not been extensively investigated. The pressure drop in the fluidized bed has been measured with variation of downstream pressures from 1.33 to 101.3 kPa in the shallow and deep fluidized beds under the sub-atmospheric pressures. The obtained minimum fluidization velocity of powders is a function of pressure due to the changes of gas density and mean free path. We can experimentally determine the critical Knudsen number and the critical pressure to define the slip regime significantly to influence the hydrodynamics of fluidized beds.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.2
• /
• pp.1-9
• /
• 1999

Applicability of the pressure gradient method which is formulated based on pressure gradient is verified against turbulent flow analysis. In the pressure gradient method, pressure gradient instead of pressure itself is obtained using continuity constraint. Since correct pressure gradient is found only when mass conservation is satisfied, pressure gradient method can reflect physics of flow field properly The pressure gradient method is formulated with semi-staggered grid system which locates each primitive variables on the same grid point but evaluates pressure gradient in-between. This grid system ensures easy programming and reflection of correct physics in analysis. For verifying applicability of this method, the pressure gradient method is applied to turbulent flow analysis with low Reynolds number $\kappa$-$\varepsilon$ model. Turbulent flows include fully developed channel flow, backward-facing step flow, and conical diffuser flow. Prediction results show that the pressure gradient method can be applied to turbulent flow analysis. However, the pressure gradient method requires somewhat long computation time. Proper way to find optimum under-relaxation factor, $\gamma$, is also need to be developed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.1-9
• /
• 2002

Axisymmetric separated flows in a converging-diverging conical nozzle are investigated through numerical simulations for various pressure ratios. We employ AUSM scheme for spatial derivatives and Pulliam's 2nd order subiteration time stepping scheme for implicit time integration. Numerical results indicate that the separated flow structures are very complex when compared to the simple quasi-one dimensional flow. Depending on the pressure ratio, the flow within the nozzle is either separated or non-separated. Various separated flow patterns with distinctive features are illustrated and discussed in detail.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.21-25
• /
• 1998

탈황설비 배관내 연소가스의 삼차원 유동장에 대한 전산해석을 수행하였다. 복잡한 형상으로 주어진 배관내의 유동장 특성을 관찰하고 압력손실을 계산하였다. 특히 안개깃의 설치유무에 따른 유동장 특성 변화 및 압력손실 감소효과를 집중적으로 고찰하였다. 안내깃의 설치에 따라 유량배분이 적절하게 되고 압력손실이 현저하게 줄어듬을 알 수 있었다. 배관에서의 압력손실을 계산하여 배관설계 및 송풍기 용량 산정의 적절성을 확인할 수 있었다.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.614-618
• /
• 2014

본 연구에서는 디퓨저의 압력회복을 높이기 위해 디퓨저 입구에 실린더를 설치하여 후류가 압력회복에 어떤 영향을 미치는지 알아보았다. 2D-Incomp-2.1-P 해석자를 이용하여 속도, 압력에 따른 유동가시화를 통해 내부유동을 분석하였고, 압력회복계수를 비교하여 디퓨저 입구에 설치된 실린더의 후류가 디퓨저 성능에 어떤 영향을 주는지 비교하였다. 그결과 실린더를 설치하였을 때 확대부에서의 박리영역이 더 작아졌고 압력회복계수가 더 높아졌다.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.707-713
• /
• 2008

Characteristics of minimum fluidization velocity and pressure fluctuations were investigated in an annular fluidized bed whose diameter was 0.102 m and 2.0 m in height. Effects of gas velocity, particle size and bed temperature on the minimum fluidization velocity and pressure fluctuations were examined. The values of minimum fluidization velocity obtained by means of three different methods were very similar each other. The correlation dimension could be a quantitative parameter for expression the resultant complex behavior of gas and solid mixture in the annular fluidized bed. The value of correlation dimension increased with increasing gas velocity, fluidized particle size and temperature in the bed. The minimum fluidization velocity could be determined by means of correlation dimension of pressure fluctuations as well as pressure drop in the bed and standard deviation of pressure fluctuations. The minimum fluidization velocity increased with increasing particle size but decreased with increasing bed temperature in annular fluidized beds. The minimum fluidization velocity was well correlated in therms of correlation dimension as well as operating variables within experimented conditions of this study.

• The Korean Journal of Rheology
• /
• v.7 no.2
• /
• pp.139-149
• /
• 1995

실제 복합재료 제조공정에 널리 이용되는 등방성 탄소섬유직조와 에폭시수지에 대 해서 수지의 유동을 일방향으로 근사하여 비정상상태 투과계수와 모세관압을 측정하는 실험 을 수행하였고 적층된 섬유직조의 기공율, 금형 주입압력 그리고 섬유직조의 적층수에 따른 수지유동특성을 분석하였다. 또한 금형 충전과정에 대한 유동가시화 실험을 수행하여 유동 선단과 충전시간을 측정하였다. 전체 조업압력에 미치는 모세관압의 영향을 규명하기 위해 일정 유입압력에 따른 금형충전과정에 대하여 유한요소/관할부피 방법을 이용한 수치모사를 수행하였다. 함침공정의 수지유동에서 비정상상태 투과계수는 섬유직조의 기공율에 따라 급 격히 증가하였고 에폭시수의 표면장력에 기인한 모세관압은 기공율 감소에 따라 급격히 증 가하였다. 동일한 기공율에서 섬유직조의 적층수가 증가함에 따라 투과계수와 모세관압은 모두 증가하는 경향을 보였다. 또한실험에서 측정한 모세관압을 고려하여 유동선단과 금형 충전시간을 수치모사방법으로 예측ㄷ한 결과는 유동가시화 실험에의한 결과와 잘 일치함을 보였다. 이결과로부터 낮은 압력에서 조업하는 RTM공정에서 모세관압효과는 유동선단과 금형 충전시간을 예측하는데 기여함을 알수 있다.

• Journal of the KSME
• /
• v.56 no.9
• /
• pp.49-53
• /
• 2016

액체로켓엔진은 연소실의 온도가 약 3,600K로서 냉각시스템은 필수적이다. 지금까지 대표적으로 사용되어온 냉각방법은 재생냉각과 막냉각으로 아임계압력에서 다양한 실험연구에 의해서 설계가 진행되어 왔다. 아임계압력에서 얻어진 유동구조 이해 및 설계경험식은 초임계 압력에서는 물성치가 급격히 변하기 때문에 재정립될 필요가 있다. 특히 열전달 성능을 좌우하는 난류유동구조가 크게 바뀌기 때문에 초임계 유체에 대한 난류유동 및 열전달연구가 진행될 필요가 있다. 이 글에서는 초임계 압력조건에서 난류열전달 연구동향을 소개하고자 한다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1237-1240
• /
• 2010

본 연구에서는 유동층반응기를 이용하여 왕겨의 탄화반응을 수행하였다. 탄화반응은 내경 40mm, 높이 1.8m의 유동층을 사용하였으며, 분산판은 다공성 스테인레스스틸을 사용하였다. 탄화반응은 질소를 이용하여 수행하였다. 왕겨 주입입자 크기는 직경 2.0mm, 0.715mm, 0.359mm, 0.194mm를 각각 사용하였으며, 유동층의 온도는 $400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$, $700^{\circ}C$에서 탄화특성을 측정하였다. 또한 유동층의 매질로는 직경 1.0mm의 Co-Mo-Fe/$Al_2O_3$ 촉매를 사용하였으며, 탄화물은 유동층상부에 설치된 사이크론에 의하여 포집분리되었다. 탄화시 유동층 내부의 현상을 압력요동을 이용하여 해석하였으며, 압력신호로부터 평균압력, 압력요동의 표준편차, 주진동수, power spectrum density function을 계산하여 층내현상을 해석하였다. 층내온도, 유동화속도, 공급 입자크기에 따른 층내현상을 압력요동특성치를 이용하여 해석할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.1
• /
• pp.9-18
• /
• 2013

Two-phase vapor-liquid flows exist in many shell and tube heat exchangers such as condensers, evaporators, and nuclear steam generators. To understand the fluid dynamic forces acting on a structure subjected to a two-phase flow, it is essential to obtain detailed information about the characteristics of a two-phase flow. The characteristics of a two-phase flow and the flow parameters were introduced, and then, an experiment was performed to evaluate the pressure loss in the tube bundles and the fluid-dynamic force acting on the cylinder owing to the pressure distribution. A two-phase flow was pre-mixed at the entrance of the test section, and the experiments were undertaken using a normal triangular array of cylinders subjected to a two-phase cross-flow. The pressure loss along the flow direction in the tube bundles was measured to calculate the two-phase friction multiplier, and the multiplier was compared with the analytical value. Furthermore, the circular distributions of the pressure on the cylinders were measured. Based on the distribution and the fundamental theory of two-phase flow, the effects of the void fraction and mass flux per unit area on the pressure coefficient and the drag coefficient were evaluated. The drag coefficient was calculated by integrating the measured pressure on the tube by a numerical method. It was found that for low mass fluxes, the measured two-phase friction multipliers agree well with the analytical results, and good agreement for the effect of the void fraction on the drag coefficients, as calculated by the measured pressure distributions, is shown qualitatively, as compared to the existing experimental results.