• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.713-716
• /
• 2007

Interests have been focused to the renewable energy because energy cost of fossil fuel increased and global climate change caused by CO2 evolution became severe. To overcome these problems, it is essential to develop the energy conversion technologies of renewable resources. Therefore, production and utilization state of wood and woody waste was firstly investigated and then various technologies (pyrolysis, gasification, and combustion) converting the wood and woody waste to energy were summarized. Some case studies of woody waste utilization in europe was introduced with the policy of EU countries. Economical aspect of woody waste was compared with the current fossil fuels and the energy policy of wood and woody waste was suggested.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.05a
• /
• pp.66-74
• /
• 1999

일반적으로 압출용 빌렛트제조에는 빌렛트상하의 품질변화로 수평연속주조법이 사용되지 않고 있지만 전자기교반법을 이용할 경우 이러한 단점이 없어진다. 따라서 전자기교반장치를 설치한 수평연속주조장치를 이용하여 연주빌렛트를 제조하였다. 최대자속밀도가 1000Gauss 인 전자기교반장치를 설계 제작하였으며, 간접냉각방식의 흑연몰드에서 알루미늄합금을 사용하여 건전한 연주빌렛트를 제조할 수 있는 여러 공정조건을 조사 검토하여 직경 70mm의 기포가 없고 표면이 미려한 등축정을 가진 연주빌렛트를 제조하였다. 인출속도에 따른 수평 연속주조 빌렛트의 표면, 용탕유동라인 및 조직을 검토한 결과 평균인출속도 20mm/min에서 40mm/min까지 아주 미려한 표면특성을 가졌으며, 인출속도가 빠르면 유동라인이 표면에서 중심 쪽으로 완만한 기울기를 가지게 되어 표면응고층이 얇아져 빌렛트가 고액계면에서 끊어지게 되며, 조직미세화는 인출속도가 클수록 미세화되었으나, 결정구상화정도는 인출속도가 빠를수록 악화되었다.

• Journal of computational fluids engineering
• /
• v.5 no.2
• /
• pp.20-27
• /
• 2000

An unstructured implicit Euler solver is parallelized on a Cray T3E. Spatial discretization is accomplished by a cell-centered finite volume formulation using an upwind flux differencing. Time is advanced by the Gauss-Seidel implicit scheme. Domain decomposition is accomplished by using the k-way n-partitioning method developed by Karypis. In order to analyze the parallel performance of the solver, flows over a 2-D NACA 0012 airfoil and 3-D F-5 wing were investigated.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.2064-2070
• /
• 1995

Characteristics of thermal flow stratification were studied experimentally by using the small scale pressurizer-surge line model. Thermal flow stratifications in the horizontal section of surge line were analyzed by the relation between the maximum temperature difference at any cross section in surge line and the Froude number representing the boundary conditions, i.e., in/out surge flow velocity and temperature difference of system. Thermal flow stratifications in outsurge flow decreased inversely proportional to the Froude number and did not exist for Fr>1. In insurge flow thermal flow stratifications disappeared near Fr=1.5, but resulted in the higher temperature difference than the case of outsurge flow.

• 한국전산유체공학회:학술대회논문집
• /
• 1999.11a
• /
• pp.193-200
• /
• 1999

An unstructured implicit Euler solver is parallelized on a Cray T3E. Spatial discretization is accomplished by a cell-centered finite volume formulation using an unpwind flux differencing. Time is advanced by the Gauss-Seidel implicit scheme. Domain decomposition is accomplished by using the k-way N-partitioning method developed by Karypis. In order to analyze the parallel performance of the solver, flows over a 2-D NACA 0012 airfoil and a 3-D F-5 wing were investigated.

• Journal of computational fluids engineering
• /
• v.19 no.1
• /
• pp.57-63
• /
• 2014

This study performed numerical analysis for the characteristics of flow-induced forces and the flow instability depending on the cross-sectional shape of the cylinder in laminar flow. To implement the cylinder cross-section, we adopted an Immersed Boundary Method with marker particles. We analyzed flow characteristics based on the radius of corner curvature. Main parameters are corner radius and Reynolds number (Re). With Re = 40, 50, 150 we calculated the flow field, drag coefficient, RMS of lift coefficient, pressure coefficient and Strouhal number in conjunction with the corner radius variation. Also, we calculated critical Reynolds number ($Re_c$) depending on the corner radius variation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.11
• /
• pp.1603-1609
• /
• 1998

Numerical solutions of Stokes flow through periodic arrays of cylinders were sought using Darcy's law and homogenization theory. Drag and lift forces of each cylinder were computed for various attack angles and pitch-to-diameter ratios. It was found that drag force decreased as principal pressure gradient direction deviated from array direction and that drag force increased exponentially as pitch-to-diameter ratio approached unity. Similar tendency was found in lift force except that lift force increased and then decreased in quadratic manner as attack angle varied.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.04a
• /
• pp.255-260
• /
• 2010

최근 건축물은 초고층화 대형화 지하심층화 되어가고 있다. 한편, 이러한 건축물은 화재시 기존의 건축물 보다 피난안전성의 문제가 대두된다. 이에 따라 국내외에서는 성능적 피난안전계획을 목적으로 PBD를 시행하고 있다. 하지만 국내의 경우 국외에 비하여 그 방법론이 부족하고, 건축물의 피난용량이 부족한 시점에 놓여있다. 이러한 배경을 통하여 본 연구는 재실자 피난행동분석 중 피난계산에 중요한 요인인 출구유동계수를 조사하고, 기존의 국내외 문헌과 비교를 실시하였다. 이에 따라 종합표준치 1.88인/ms를 도출하였으며, 또한 실태조사의 한계성을 파악하고, 이를 통한 조사기법에 대한 프로세스를 제안하였다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.8 no.11
• /
• pp.1-16
• /
• 1985

This study is to systematize a flow of production activities with a formula to help understand the trend of production in an enterprise according to the profit graph. Although the existing methods of studies were unattainable to analyze earnings correlative to production due to the lack of total business management, this study is aimed at testing a new method that developed the method of an advanced analysis as well as a combined system of the profit graph. and the production trend.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.12
• /
• pp.91-99
• /
• 1995

An effort has been made to more accurately analyze the flow in the chip cavity, particularly to model the flow through the openings in the leadframe and correctly treat the thermal boundary condition at the leadframe. The theoretical analysis of the flow has been done by using the Hele- Shaw approximation in each cavity separated by a leadframe. The cross-flow through the openings in the leadframe has been incorporated into the Hele-Shaw formulation as a mass source term. The temperature of the leadframe has been calculated based on energy balance in the leadframe. The flow behavior in the leadframe has been verified experimentally. In the experiment, a transparent mold and clear fluid have been used for flow visualization. Comparisons were made between the calculation and experimental results which showed a good agreement.