• 대한환경공학회지
• /
• 제37권1호
• /
• pp.23-33
• /
• 2015

본 연구는 물탱크 내부의 사류구역 최소화에 목적을 두고 진행하였으며 입수관의 형태를 개선하여 물탱크 내부에서 발생하는 유동특성을 전산유체역학(Computational Fluid Dynamics, CFD)모사 기법을 이용하여 분석 하였다. 기존에 물탱크에 사용되던 자유낙하 방식의 입수관을 다공형 스크류 노즐 입수관으로 개선하고 유동 특성을 분석한 결과 노즐 안에 스크류 날개가 설치된 경우 유동흐름의 폭이 넓게 분사 되었으며 원통형 물탱크 내부에서도 넓은 유동 흐름이 나타났다. 또한 사각형 물탱크에 다공형 스크류 노즐 입수관이 1개 설치되어 있을 경우와 2개 설치되어있을 경우의 유동해석과 추적자모의를 수행하였으며 그 결과 입수관을 2개 설치할 경우 MODAL, MORILL index값이 1에 가깝게 나타나 Plug Flow 특성에 근접하단 결과를 얻을 수 있었다.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.1022-1030
• /
• 1999

A numerical study was carried out to analyze the effect of flow distribution of stirred part and plug flow part on combustion efficiency at the coal gasification process in an entrained bed coal reactor. The model of computation was based on gas phase eulerian balance equations of mass and momentum. The solid phase was described by lagrangian equations of motion. The $k-{\varepsilon}$ model was used to calculate the turbulence flow and eddy dissipation model was used to describe the gas phase reaction rate. The radiation was solved using a Monte-Carlo method. One-step parallel two reaction model was employed for the devolatilization process of a high volatile bituminous Kideco coal. The computations agreed well with the experiments, but the flame front was closer to the burner than the measured one. The flow distribution of a stirred part and a plug flow part in a reactor was a function of the magnitude of recirculation zone resulted from the swirl. The combustion efficiency was enhanced with decreasing stirred part and the maximum value was found around S=1.2, having the minimum stirred part. The combustion efficiency resulted from not only the flow distribution but also the particle residence time through the hot reaction zone of the stirred part, in particular for the weak swirl without IRZ(internal recirculation zone) and the long lifted flame.

• 대한기계학회논문집B
• /
• 제26권8호
• /
• pp.1055-1061
• /
• 2002

A numerical and experimental study on the flow fields behind the fan outlet was carried out to improve the performance of a conventional fan-sink(fan and heat sink). Conventional fan-sinks have a heat sink of which fin configurations tend to increase the flow resistance, thus decreasing the performance and the cooling capabilities of a fan-sink. Lifting surface method is used for the prediction of flow fields behind the fan outlet. Oil-dot flow visualization technique is applied for the validation of numerical results. The numerical results and experimental data show agreement each other. A conventional heat sink is modified and redesigned using flow patterns behind the fan outlet. The newly designed heat sink has the configuration of curved fins which minimize flow resistance. It showed improvements in both cooling: capabilities and volumetric flow rate compared to the conventional one.

• 한국가금학회지
• /
• 제27권1호
• /
• pp.31-35
• /
• 2000

This study was investigated to observe Lactobacillus spp. population of poultry digestive organ, duodenum, ilium, cecum and colon by growing steps and to select of valuable lactobacilli as probiotics. Two strains of male broiler commercial chickens, Hybrid and Ross, were used to evaluate population of Lactobacillus spp. in intestinal tracts. Three strains of Lactobacillus were identified, and bile salts environment. The number of lactovacilli was the lowest in duodenum compared to other intestinal tracts which had similar population. Population of Lactobacillus was maintained constantly regardless growing steps after one week of age. Identification of Lactobacillus from cecum resulted in L.reuteri BC5, L. crispatus BC7, L.reuteri BC9. All strains was depressed in pH 1 and 2, although two strains could survive for one hour at pH 2. And they could survive at pH 4 for 4hours. In bile salts tolerance, L.reuteri BC5, L.crispatus BC7 were maintained for 2 hours, but the growth reduced from 2hours. Growth of L.reuteri BC9 was increased continuously. In conclusion, Lactobacillus of intestinal tracts were established at first week, and maintained constant population. They were influenced on severe acidic condition and bile salts. Cecal Lactobacillus has different growth charcteristics by strains.

• 동력기계공학회지
• /
• 제10권3호
• /
• pp.23-31
• /
• 2006

Mean velocities and turbulent characteristics in the three-dimensional flow fields of a gun-type gas burner were measured by using triple hot-wire probe (T-probe) in order to compare them with the results already presented by X-type hot-wire probe (X-probe). Vectors obtained by the measurement of two kinds of probes in the horizontal plane and in the cross section respectively show more or less difference in magnitude each other, but comparatively similar shape in overall distribution. Axial mean velocity component along the centerline shows that the value by T-probe is about ten times smaller than that by X-probe above the range of X/R=3. Also, the axial component of turbulent intensity along the centerline appears the biggest difference between the two probes. Moreover, axial mean velocity component, axial turbulent intensity component and rotational along the Y-directional distance show a big difference between slits and swirl vanes. On the whole, the values by T-probe appear smaller than those by X-probe.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.219-230
• /
• 1995

The flow characteristics of a two-dimensional offset jet issuing parallel to a rough wall is experimentally investigated by using a split film probe with the modified Stock's calibration method. The mean velocity and turbulent stresses profiles in the up and down-stream locations of the wall-attachment regions are measured and compared with those of the smooth wall attaching offset jet cases. It is found that the wall-attachment region on the rough wall is wider than on the smooth wall for the same offset height and the jet speed. The position of the maximum velocity point is farther away from the wall than that for the smooth wall case because of the thick wall boundary layer established by the surface roughness. It is concluded that the roughness of the wall accelerates the relaxation process to a redeveloped plane wall jet and produces a quite different turbulent diffusion behavior especially near the wall from comparing with the smooth plane wall jet turbulence.

• 한국수산과학회지
• /
• 제27권4호
• /
• pp.397-403
• /
• 1994

Circulations in Deukryang Bay are investigated using a numerical shallow water model. In the flow fields observed at four stations, north-south velocity components are dominant. In the model, the circulation forced by $M_2$-tide basically corresponded well to the observations. The model shows the strong currents in the mouth and the eastern part in the bay with about 60 cm/s and 50 cm/s, respectively. The model also shows the eddies in the tidal residual currents. To investigate the mechanism of eddy formation some numerical experiments are carried out. The results show that inertial and topographic effects play an important role in the eddy formation.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.238-241
• /
• 2003

터보펌프식 기체 공급계의 액체산소 탱크는 저압이 유지됨에 따라 탱크 내에서 추진제의 기화가 활발히 이루어지게 되며, 이러한 경향은 가압 기체의 온도가 높아짐에 따라 커지게 된다. 가압헬륨의 충진량을 결정하기 위해서는 이에 대한 정밀한 해석이 필요하다. 본 연구에서는 탱크내의 유동현상을 이상유동(two phase flow) 형태로 모델링 하여 탱크 내에서의 액체산소의 증발현상에 대하여 고찰하고 가압기체 온도 및 표면 열전달 계수에 따른 필요 헬륨 가스량을 예측한다.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.156-164
• /
• 2001

Two-dimensional solidification analysis during rheology forming process of semi-solid aluminum alloy has been studied. Two-phase fluid flow model to investigate the velocity field and temperature distribution is proposed. The proposed mathematical model is applied to the die shape of the two types. To calculate the velocity and temperature fields during rheology forming process, the earth governing equation correspondent to the liquid and solid region are adapted. Therefore, each numerical models considering the solid and liquid region existing within the semi-solid material have been developed to predict the deflect of rheology forming gnarls. The Arbitrary Boundary Maker And Cell (ABMAC) method is employed to solve the two-phase flow model of the Navier-Stokes equation. Theoretical model on the basis of the two-phase flow model is the mixture rule of solid and liquid phases. This approach is based on the liquid and solid viscosity. The liquid viscosity is pure liquid state value, however solid viscosity is considered as a function of the shear rate, solid fraction and power law curves.

• 한국가금학회지
• /
• 제27권3호
• /
• pp.227-233
• /
• 2000

Preset study was carried out to evaluate characteristics of lactic acid producing bacteria(LAB) in hen's cecum as probiotics value. Distribution of LAB in intestinal tracts was investigated using 5∼25 weeks - old hens. So, 12 strains to LAB with different morphology were isolated purely. Acid tolerance of LAB tested at pH 1, 2, 3, and 4, and bile resistant also tested at 0, 0.3% and 0.5% bile salt concentration. Growth pattern of LAB observed to 60h. All strains of cecal LAB couldn't survive at pH 1, and decreased linearly survival colony after incubation at pH 2 although some strains could survive for 2h. Most of LAB maintained constant number at pH 3 and 4. The bacterial action could increase linearly at 0% bile salt concentration in all of tested strains. However, only one strain could multiply at 0.3% bile salt, others were influenced by bile salt. That tendency was similar at 0.5% bile salt. Growth was peaked at 12 to 18 h after innoculation. After peak, the decreasing pattern of colony was different to strains which some strains decreased rapidly or maintained for long time. The LAB of hen's cecum was similar to intolerance acidity, but different to resistant to bile salt and growth pattern by strain. So, we choose three strains which have probiocs value, and identified as Lactobacillus amylovorus LLA7, Lactobacillus crispatus LLA9 and Lactobacillus vaginalis LLA11.