• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.360-364
• /
• 2013

본 연구에서는 아음속 저 레이놀즈 수에서 NACA0012에 나타난 층류 박리 거품과 천이유동에 대해 연구하였다. 천이유동조건과 완전난류유동 조건에 따른 EDISON 계산 결과 값과 실험값의 공력계수를 비교하였다. 또한, EDISON 계산 결과 값과 Xfoil을 이용하여 나온 결과 값의 천이점 비교를 통해 Xfoil의 천이 모델과 EDISON 천이 모델간의 차이를 비교하였다.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.533-538
• /
• 2014

NACA0012형상을 사용하여 천이현상을 고려한 유동해석이 Dynamic Stall에 미치는 영향에 대해 살펴보았다. 천이 현상을 고려한 진동하는 익형의 공력 계수 변화를 비교하기 위해 완전 난류로 가정한 해석 결과와 실험 결과를 비교하였다. NACA0012익형을 사용하였으며 두께 변화에 따른 해석 결과를 비교하기 위해 NACA0009익형도 사용하였다. 정상유동해석의 천이 발생 지점과 비정상 유동해석의 천이 발생 지점을 비교하였으며, 익형주위의 유동결과를 비교하여 천이해석과 완전 난류해석 결과의 차이를 분석하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1184-1191
• /
• 2009

In order to reduce the download around the Smart UAV(SUAV) at Transition mode, flow control using synthetic jet has been performed. Many of the complex tilt rotor flow features are captured including the leading and trailing edge separation, and the large region of separated flow beneath the wing. Based on the results of part 1 of the present work, synthetic jet is located at 0.01c, $0.95c_{flap}$ and it is operated with the non-dimensional frequency of 0.5, 5 to control the leading edge and trailing edge separation. Consequently, download is substantially reduced compared to with no control case at transition mode using leading edge jet only. The present results show that the overall flight performance and stability of the SUAV can be remarkably improved by applying the active flow control strategy based on synthetic jet.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.10
• /
• pp.795-803
• /
• 2015

The boundary layer developing over the suction surface of a first-stage turbine blade for power generation has been investigated in this study. For three locations selected in the region where local thermal load changes dramatically, mean velocity, turbulence intensity, and one-dimensional energy spectrum are measured with a hot-wire anemometer. The results show that the suction-surface boundary layer suffers a transition from a laminar flow to a turbulent one. This transition is confirmed to be a "separated-flow transition", which usually occurs in the shear layer over a separation bubble. The local minimum thermal load on the suction surface is found at the initiation point of the transition, whereas the local maximum thermal load is observed at the location of very high near-wall turbulence intensity after the transition process. Frequency characteristics of turbulent kinetic energy before and after the transition are understood clearly from the energy spectrum data.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.213-219
• /
• 2013

This study examined the static characteristics of a spool valve with a hybrid lap between the spool land and the sleeve. The static equation for the pressure characteristics was derived from flow equations that depend on the spool displacement, and the final model was derived from $q_a=q_b=0$ because the pressure characteristics test needs to block the control port in the valve. The static equation for the flow characteristics was derived from the pressure characteristics when the control port is open ($q_a=q_b$, $p_a=p_b$). The characteristic equation in the shifted region was assumed from the proportional relationship between the pressure-flow characteristics and the spool displacement.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.1001-1010
• /
• 1991

본 연구에서는 천이유동의 존재를 밝히고 천이영역과 경사각의 관계, 유동 및 열전달특성을 구명하고자 한다.이를 위해 유한차분방법(FDM)으로 수치해석하고 실 험결과와 비교, 검토하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2368-2375
• /
• 1992

The transition of turbulent kinetic energy(TKE) balance along the centerline of the flow unit, which is composed of straight-duct, contraction and free-jet, has been investigated by the hot-wire anemometry. It is found that the mean turbulent kinetic energy is balanced by the dissipation in the internal flow region ; by the production and the dissipation, through contraction ; and by the dissipation, in initial region(X〈8D) of free-jet. But in the developing region (8D〈X〈20D) it is balanced by all of the three(ie, diffusion, production and dissipation). Finally, in the downstream of free-jet, the mean TKE is balanced again by dissipation like as the beginning. The decay-laws along the centerline are checked in the region of free jet as well as in the straightduct. After the developing region of free-jet also exist the decay-laws, the exponent of the axial turbulence being bigger than of the radial.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.202-211
• /
• 2017

In this study, numerical simulations were performed using the ${\gamma}-Re_{\theta}$ transition model of KFLOW for the transitional flow over the KARI-11-180 airfoil. Numerical results of KFLOW were compared with experimental data and two other numerical results of XFoil and MSES. Fully turbulence model was predicted high skin friction drag than transition model because fully turbulence model could not solve the transitional flow. Numerical predictions using the ${\gamma}-Re_{\theta}$ model of KFLOW show a good agreement with experimental data and other numerical results. Present numerical results were confirmed the state of drag bucket due to dramatic changing of the transition location on the airfoil surface.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.50-55
• /
• 2004

Performance predictions of the propulsion system were conducted for a 900㎏ class Canard Rotor/Wing vehicle. The main components of the propulsion system are turbojet engine, exhaust ducts and nozzles. The internal flow of the duct was considered as one-dimensional, compressible and viscous flow. Adequate governing equations including centrifugal force effect were applied to the analysis of the duct flows. Results such as available power, available thrust, engine throttle, mass flow rates, rotor RPM and cruise nozzle area were presented for rotary-wing mode and transition mode.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.300-311
• /
• 2008

This study investigates the natural convection of air(Pr=0.7) between two walls having a small- wave- number sinusoidal temperature distributions with a phase difference. The wave number and the phase difference of wall temperatures are k=0.5 and ㄱ/2, respectively. In the conduction-dominated regime at small Rayleigh number, two slightly inclined cells are formed over one wave length. At higher Rayleigh number, however, multicellular convection occurs in thermally unstable region. A spatial symmetry is intermittently broken in the transient period at the Rayleigh number near the critical value. The steady-state flows always satisfy the spatial symmetry. A steep increase of Nusselt number occurs near the Rayleigh number at which transition of flow pattern occurs.