• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.5-15
• /
• 1995

An application of the cross correlation technique by adopting ultrasonic waves for water pipe flow measuring purpose is studied. It is a non-intrusive flow metering method by determining the time of the flight of the flow turbulent noise and its non-obstructing mechanism enables to reduce process energy loss due to the flowmeter obstruction. A digital signal processor for the purpose of the real time Fourier transform was employed for the fast time calculation of the flow velocity. The overall accuracy was found as about $1\%$ for flow velocities from 0.25 m/s up to 16 m/s and for the pipe inside diameters from 50mm to 248mm. The cross correlation technique can be used for the tap water utility including most common liquid flows.

• Journal of the KSME
• /
• v.33 no.12
• /
• pp.1069-1075
• /
• 1993

측정기술이 발달함에 따라 실제 연소시스템에서 직접 응용할 수 있고, 시공간적으로 해상도가 높고 유동장과 온도장을 교란하지 않는 방법이 요구되고 있다. 이 글에서는 2장에서 광학적 방 법을 이용한 입자의 크기 측정법을 살펴보고, 3장에서는 광학적 방법을 이용한 온도의 측정법에 대하여 설명하고자 한다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.72-75
• /
• 2005

본 연구에서는 야외규모 TCE (trichloroethylene) 질량전이역학을 평가하기 위해 TCE의 대수층 내 유입 및 용해상 거동을 고해상도 수치 모사를 실시하였다. 공간적으로 불균질한 대수층 $10{\times}10{\times}10m$ 도메인 내부의 유입된 TCE 분포를 모사하기 위해 본 연구를 통해 개발된 정성적 침투모델(percolation model)이 이용되었다. 이를 기초로 하여 연계되어진 (coupled) 지하수 유동 및 용해상 거동 장기 (long-term) 모사를 실시하였다. 지엽적으로 일어나는 질량전이는 기존 연구를 통하여 발표되어진 실험실규모 연구에 기초하였다. 지하수가 도메인을 지나 흘러나가는 경계면에서 측정되어진 용해상 (aqueous phase) TCE의 질량선속 (mass flux)을 통해 실질 야외규모 질량전이 상수가 계산되었다. 관찰된 바 야외규모 질량전이 상수는 실험실 연구를 통해 측정된 값에 비하여 휠씬 작은 값을 보였으며 이는 지하수 유속 및 TCE의 불균질한 분포에 기인한다. 야외규모 질량전이 상수는 평균 지하수 유속에 직접 비례하는 것으로 관찰되었고 이는 기존 실험실 연구를 통해 알려진 평균 지하수 유속의 0.7승이라는 결과와 대조되는 것이다. 또한 모사를 통해 관찰된 야외규모 질량전이 상수는 상대 TCE 질량의 고갈상수 승에 비례함을 보였다. 이러한 고갈상수는 TCE가 측방으로 퍼지는 현상이 강한 대수층, 즉 저투수성 층의 발달이 양호한 대수층, 에서는 1보다 작은 값을 갖고 그렇지 않은 대수층, 즉 저투수성 층의 발달이 미약한 대수층, 에서는 대체적으로 1보다 높은 값을 갖는 것으로 관측되었다. 이는 DNAPL의 측방 퍼짐이 강한 대수층에서는 용해로 인한 시간에 따른 오염원 부근에서의 농도 감소가 미약하기 때문인 것이며, 그와 반대로 DNAPL의 측방 퍼짐이 약한 대수층에서는 시간이 지남에 따라 용해에 의해 지속적으로 오염원 부근에서의 농도가 감소 또는 소멸함으로 인하여 측정되는 용해상 DNAPL의 질량 선속 역시 계속적으로 감소되는 것으로 밝혀졌다.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.2
• /
• pp.3-13
• /
• 2001

It has been known that nonlinear characteristics of sorption affect the transport behavior of water soluble pollutants in soils. However detailed experimental studies have not been performed to verify the effect of non-linearity of adsorption isotherm on transport of chemicals in porous media. In this research, the distortion of breakthrough curves of a cationic surfactant (cetylpyridinium chloride, CPC) in a engineered stainless steel column packed with glass beads were investigated. Glass beads with about 110 $\mu\textrm{m}$diameter coated with a thin n-decane film were used as the media providing the sorption surface for CPC. The CPC adsorption isotherm on the surface of n-decane from aqueous solution was a typical Langmuir type. The breakthrough curve of CPC using step Input showed a late breakthrough on the front side and early breakthrough on the back side accordance to the shape of the isotherm. The retardation factor of CPC was found to be a strong function of the input concentration, which also a manifestation of the non-linearity of the isotherm. The retardation factors for the CPC with step input agreed with those of pulse input that the maximum concentrations are controlled to be the same as the step input concentrations. This results support the validity of the unproven field practices of using hydrogeotracers with non-linear adsorption isotherms to determine the hydrogeological parameters, e.g., NAPL saturation, air-water or NAPL-water interfacial areas.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.3
• /
• pp.483-492
• /
• 1998

An inverse analysis been applied to obtain the flow stress of the material. In this method, a ring-shaped specimen is compressed between two flat tools. This procedure employs, as the object function of inverse analysis, the balance of measured loads and reaction forces calculated by using rigid-plastic finite element method. The balance is explicit scalar function of flow stress which is a function of some unknown constants. For minimizing the balance, Newton-Raphon scheme is used. The friction factor, m, between flat tools and the specimen is determined by using friction area-divided method. The proposed method allows an accurate identification by avoiding the usual assumptions made in order to convert experimental measures into stress-strain relation. In this paper, the proposed method is numerically tested. A commercial pure aluminum was selected, as an example, to apply the method and the results are compared with stress-strain relation obtained by experiments.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.3
• /
• pp.68-75
• /
• 2008

The three-dimensional structure of detonation wave propagating in a circular tube was investigated using a parallel computational code developed previously. A series of parametric study for a circular tube of a fixed diameter gave the formation mechanism of the detonation cell structures depending on pre-exponential factor, k. The unsteady results in three-dimension showed the mechanisms of two, three and four cell mode of detonation wave front structures. The detonation cell number was increased but cell width and length were decreased with increased pre-exponential factor k. In the all multi-cell mode, the detonation wave structure and smoked-foil records on the wall are made by the moving of transverse waves. The detonation wave front structures have the regular polygon and windmill shapes periodically.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.9
• /
• pp.2271-2282
• /
• 1995

Numerical simulations for the effects of secondary flow and turbulence diffusion on the particle concentration distributions have been carried out for the single stage electrostatic precipitator. The electrohydrodynamic secondary flow, particle concentration distribution and collection efficiency have been evaluated as a function of dimensionless parameters such as Re, $N_{end}$, $P_{e}$ x. The results of simulations show that for increasing secondary flow intensity the concentration distribution is drastically deformed and collection efficiency is decreased which is more than due to turbulent diffusion.n.n.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.77-78
• /
• 2011

A multi-step quasi-global mechanism is developed for the kerosene/oxygen combustion analysis including dissociation products. Reaction constants of the global reaction are determined to have agreement with experimental data. The mechanism is used for the numerical analysis of the combustion flow field of the kerosene/oxygen shear coaxial injector. The results from high-resolution numerical analysis confirmed qualitatively that the recess enhance the fuel/air mixing and combustion efficiency by the increased flow instabilities.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.292-298
• /
• 1991

Previous studies on the performance of the round type impactor were reexamined and extended to the case of high particle mass loading. It was pointed out that the previous numerical studies need to be supplemented in the numerical process. The impactor performance was calculated under the same conditions as previous studies by the exact calculation process and it was found out that a tail of the collection efficiency curve, which have not been found in the previous studies, appeared in the results of ours. Numerical results for high particle mass loading show that the value of the collection efficiency in the impactor decreases but better particle-cut characteristics can be obtained, as the amount of the particle mass loading increases.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.1
• /
• pp.40-48
• /
• 2003

Large eddy simulation is used to investigate the compressible flow over a open cavity, The sub-grid scale stresses are modeled using the dynamic model. The compressible Navier-Stokes equations are solved with the sixth order accurate compact finite difference scheme in the space and the 4th order Runge-Kutta scheme in the time. The results show a typical flow pattern of the shear layer mode of oscillation over the cavity. The votical disturbances, the roll-up of vorticity, and impingement and scattering of vorticity at the downstream cavity edge can be seen in the shear layer. Predicted acoustic resonant frequency is in good agreement with that of the empirical formula. The mean flow streamlines are nearly horizontal along the mouth of the cavity. The pressure has its minimum value in the vortex core inside the cavity.