• 대한기계학회논문집B
• /
• 제31권9호
• /
• pp.780-789
• /
• 2007

Lock-on phenomenon in the wake of a circular cylinder is investigated at the Reynolds number of 360 using direct numerical simulation (DNS). To induce lock-on, a streamwise velocity perturbation with a frequency of twice the natural shedding frequency is superimposed on the free stream velocity. The Reynolds stress distributions are investigated to analyze the streamwise force balance acting on the recirculation region and the results are compared with the previous experimental result. When the lock-on occurs, the pressure force on the recirculation region is shown to increase mainly due to the reversal of the Reynolds shear stress distribution, which is consistent with our previous results using PIV measurement. It is also shown that, with the lock-on, the strength of the primary vortices increases whereas that of the secondary vortices decreases significantly. Further, under the lock-on condition the wavelength of the secondary vortices increases by as much as 2.5 times.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1096-1103
• /
• 1990

본 연구에서는 Fig.1과 같은 열린 경제(open boundary)를 갖는 일반적인 형태 의 3차원 풍동에 대한 공진 특성을 구하여 이를 실험과 비교한다.이런 풍동에 공진 진동수와 일치하는 규칙적인 가진을 주면, 유동 특성은 현저하게 변하게 된다. 일반 적으로, 이러한 임의의 형태를 갖는 풍동의 공진 진동수와 모드는 이론적인 방법으로 예측하기는 매우 힘들다. 이런 경우에 유한요소법은 매우 유용한 방법이다.

• 대한기계학회논문집A
• /
• 제26권9호
• /
• pp.1874-1881
• /
• 2002

Heat dissipation technology using the flow resonant phenomenon is a kind of a new concept in the heat transfer area. A vibration exciter is needed to enhance air flow mixing which has the natural shedding frequency of thermal system. A mechanical vibrating device for the air flow oscillation is introduced, which is driven by a moving coil actuator with a displacement estimator using strain gage. An analytical dynamic model for this mechanical vibration exciter is presented and its validity is checked by the comparison with experimental data. Values of some unknown system parameters in the analytic model are estimated through the system identification approach. Based on this mathematical model, the vibration exciter using strain displacement estimator is developed. During the experimental verification phase, it turns out the high modal resonant characteristics of a vibrating plate are a major barrier against obtaining a high bandwidth vibration exciter.

• 설비공학논문집
• /
• 제17권2호
• /
• pp.165-172
• /
• 2005

Heat transfer enhancement of three types of brazed plate heat exchangers has been evaluated experimentally. The effects of flow resonance in a plate heat exchanger on the heat transfer rate and pressure drop have been investigated in a wide range of mass flow rates in detail. The problem is of particular interest in the innovative design of a plate heat exchanger by flow resonance. The results obtained indicate that both heat transfer coefficient and pressure drop are increased as mass flow rate is increased, as expected. It is also found that the heat transfer enhancement is increased with an increase in the plate pitch, while the heat transfer is decreased with a decrease in the chevron angle. Pressure drop also increased with an increase in the plate pitch and with a decrease in the chevron angle. Heat transfer enhancement in the plate heat exchangers is maximized by flow resonance and the resonance frequency of the present plate heat exchangers is found to be in the range of $10~15\;Hz$.

• 한국추진공학회지
• /
• 제21권1호
• /
• pp.26-35
• /
• 2017

원심압축기 운전 중에 발생하는 고주기 피로균열이나 공진 등은 임펠러 파손의 주된 원인이다. 이러한 파손을 회피하기 위해 공진영역 운전에서도 견딜 수 있는 충분한 강도의 임펠러를 설계하거나, 공진이 발생하지 않도록 임펠러를 튜닝 한다. 이러한 회피설계는 임펠러 내부유동 및 성능특성 변화를 야기하게 된다. 본 연구에서는 밀폐형 임펠러에 대해 블레이드 두께를 증가시킨 모델과 스켈럽을 적용한 모델에 대한 유동 및 성능특성을 파악하기 위해 전산해석을 수행하였다. 전산해석 결과, 블레이드 두께 증가 모델 경우는 기본모델 대비 압력계수가 0.5% 감소하였으며, 전효율은 0.1% 감소하였다. 스켈럽 적용모델은 압력계수가 0.4% 증가하였으며, 전효율은 1.6% 감소하였다.

• 대한기계학회논문집B
• /
• 제39권7호
• /
• pp.579-589
• /
• 2015

본 연구의 목적은 수직으로 강제 진동하는 소수성 표면 위에 놓인 액적의 유동 및 증발 특성을 이해하는 것이다. 액적의 공진주파수를 예측하기 위해서 Lamb과 Strani and Sabetta의 이론적 고유진동수식을 이용하였고, 실험값과 비교하여 보다 근접한 고유진동수 식에 대해 타당성을 검증하였다. 액적의 형상 및 내부 유동을 가시화하기 위해 초고속카메라, 초접사렌즈 그리고 연속광을 사용하여 진동하는 소수성 표면 위 액적의 유동 및 증발 특성을 확인하였다. 그 결과 각각의 모드에서 액적은 다양한 형상을 가졌으며, 각각의 액적 내부에서 복잡한 와류가 관찰되었다. 일반적으로, 유동흐름이 대칭축을 따라 위로 상승하여 액적상단에서 표면을 따라 접촉선부근으로 이동하였고, 2차, 4차 모드는 분기형, 6차, 8차 모드는 큰 타원형의 유동패턴을 갖는 것을 확인하였다. 여러 가지 모드 중 4차 모드에서 가장 빠른 유동속도를 가졌으며, 다음은 8, 6, 2차 모드 순서였다. 네 가지 진동 모드에서의 증발률은 4, 8, 6, 2차 모드 순서로 빨랐으며, 각각의 공진에서는 그 주위 주파수 영역보다 빠른 증발률을 보였다. 마지막으로 진동을 이용한 액적의 증발은 4차 모드에서 진행되어야 보다 효율적인 진동 증발을 유도할 수 있다.

• 산업기술연구
• /
• 제21권B호
• /
• pp.125-132
• /
• 2001

Heat dissipation technology using flow resonant phenomenon is a kind of new concept in heat transfer area. A vibration exciter is needed to generate air turbulence which has the natural shedding frequency of heat system. A mechanical vibrating device for the air flow oscillation is introduced, which is driven by a moving coil actuator. An analytical dynamic model for this mechanical vibration exciter is presented and its' validity is verified by the comparison with experimental data. Values of some unknown system parameters in the analytic model are estimated through the system identification approach. Based on this mathematical model, the vibration exciter using strain displacement estimator is developed. And in the experiment, the feedback control is used. During the experimental verification phase, it turns out the high modal resonant characteristics of vibrating plate are the major barrier against obtaining a high bandwidth vibration exciter.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.483-488
• /
• 2001

In the present study a numerical simulation is performed on a natural convection inside a square cavity with a vibrating wall. The study has been conducted varying the heat transfer rate, wall excitation frequency and also the orientation of the cavity. The temperature and velocities inside the cavity was observed and also, the heat transfer coefficients on the heating wall was seen. From the results, it can be seen that the temperature inside the cavity decreases when excited with the proper frequency and the heat transfer coefficient increased with cavity inclination angle, ${\theta}$. It is also found from the results that flow resonance is occurred near the inclination angle ${\theta}=90^{\circ}$.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.57-62
• /
• 2009

Unsteady flows in a semi-induction system was investigated to verify their characteristics. A semi-induction system was designed and made to verify the Sow characteristics in an intake system. To attain an intact wave of an intake pulse, a single semi-intake system was adopted as a test rig. The system consists of an intake pipe and a rotary valve as a pulse generator, and a variable volume Helmholtz resonator. The variable volume Helmholtz resonator was mounted in the intake pipe to enhance a breathing capacity and engine performance. The phase and amplitude of the pulsating flow in an unsteady flow system were found to affect the charging capacity significantly. The behavior of pressure wave, their phase and amplitude were investigated in various regions. Some of the results obtained from experiments were described.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1353-1361
• /
• 2001

Vortex lock-on or resonance behind a circular cylinder is visualized using a time-resolved PW when a single frequency oscillation is superimposed on the mean incident velocity. For vector processing, a cross-correlation algorithm in conjunction with a recursive correlation and interrogation window shifting techniques is used. Measurements are made of the Karmas and streamwise vertices in the wake-transition regime at Reynolds lumber 360. When lock-on occurs, the vortex shedding frequency is found to be half the oscillation frequency as expected from previous experiments. At the lock-on state, the Karman vortices are observed to be more disordered by the increased strength and spanwise wavelength of the streamwiee vortices, which lead? to a strong three-dimensional motion.