• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.481-489
• /
• 2010

Experiments on laminar mixed convection in a vertical pipe were performed for the Re range 1,000-3,000, the $Gr_H$ range $10^5-10^8$, the Pr range 2,000-7,000, and aspect ratio range 1-7. Using the analogy concept, heat transfer systems were simulated by mass transfer systems. A cupric acid.copper sulfate electroplating system was adopted as the mass transfer system, and the mass transfer rates were measured. The measured Nu values were far greater than those previously reported because of the large value of pr in this experiment. As the aspect ratio in this study was not sufficiently large for the flow to be fully developed, the test results were similar to those for mixed convection on a vertical plate rather than that inside a long vertical pipe. It was concluded that the behavior of laminar mixed convection of a developing flow in a vertical pipe at a low aspect ratio and low $Gr_H$ is similar to that of laminar mixed convection in the vertical plate. As the aspect ratio and $Gr_H$ increase, the laminar mixed convection phenomena becomes similar to that observed in a fully developed flow in the vertical pipe.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.33-40
• /
• 2013

The cement industry brought very severe environment problems with massive carbon dioxide during its production. To solve this problem, attempts on Alkali-Activated Slag (AAS) concrete that perfectly substitutes industrial by-products such as ground granulated blast furnace slag (GGBFS) for cement are being actively made. AAS concrete is possible to have high strength development at room temperature, however, it is difficult to ensure the working time due to the fast setting time and the loss of workabillity because of the alkali reaction. In this study, the early age properties of alkali activated slag mortar are investigated to obtain the fundamental data for AAS concrete application to structural members. The water-binder ratio (W/B) was fixed at 0.35 and sodium hydroxide and waterglass as alkali activator was used. The compressive strength, the flow and the ultrasonic pulse velocity were measured according to the type of superplasticisers, which were naphthalene(N), lignin(L), melamine(M) and PC(P), up to a maximum of 2 percent by the mass of GGBFS. The results showed that adding melamine type of superplasticizer improved the fluidity of AAS mortar without decreasing the compressive strength, while naphthalene and polycarbonate type of superplasticizer had little effect on the fluidity of AAS mortar.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.7
• /
• pp.607-618
• /
• 2014

An experimental investigation of turbulent heat transfer during the vertical upward flow of supercritical $CO_2$ was conducted in a circular tube with inner diameter of 4.5 mm. The experiments were conducted at bulk fluid temperatures ranging from 29 to $115^{\circ}C$, pressures from 74.6 to 102.6 bar, local wall heat fluxes from 38 to $234kW/m^2$, and mass fluxes from 208 to $874kg/m^2s$. At moderate wall heat and low mass fluxes, the wall temperature had a noticeable peak value. For observing the buoyancy and flow acceleration effects on heat transfer, the ratios of Nusselt numbers from the experimental data and a reference correlation were compared with the $Bo^*$ and $q^+$ distributions. The flow acceleration parameter $q^+$ appropriately represented the heat transfer phenomena in the experiments. A new heat transfer correlation for the vertical upward flow of the supercritical pressure fluid was developed, and was found to agree with the experimental data with an error margin of ${\pm}30%$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.24-24
• /
• 2021

자연하천 바닥 경계층 내에서는 복잡한 난류 구조가 형성되며 이들은 하상에 강한 모멘텀을 전달한다. 바닥 부근에 분포하는 유사 입자들은 경계층 내에서 발생한 난류 흐름으로부터 모멘텀을 전달받아 소류사 혹은 부유사 형태로 이송되게 되며, 이러한 유사 이송 과정을 역학적으로 설명하기 위해서는 경계층 내 유체 흐름에 대한 이해가 선행되어야한다. 경계층 내 난류 흐름 특성이 유사 입자의 움직임에 미치는 영향에 대해 분석하기 위해서는 바닥 경계층 내 고해상도 유속 자료와 유사 움직임을 동시에 포착할 수 있는 기술이 요구된다. 하지만 현재까지 수행된 대부분의 선행 연구들은 점 유속을 측정할 수 있는 음파 도플러 유속계 (Acoustic Doppler Velocimetry) 혹은 2차원 입자 영상 유속계를 활용하였으며, 이들은 복잡한 3차원 난류 흐름 특성을 분석하기에는 한계가 있다. 본 연구의 목적은 실험실 실험을 통해 바닥 경계층 내 3차원 난류 흐름이 유사 이송에 미치는 영향에 대해 조사하는 것이다. 본 연구에서는 유사 주변에서의 고해상도 3차원 흐름 유동장 및 순간적인 유사 움직임에 대해서는 합성 개구 (synthetic aperture) 기반의 3차원 입자 영상 유속계 및 입자 추적 유속계를 활용하여 취득하였다. 취득된 흐름 유동장을 기반으로 레이놀즈 전단응력을 산정하였으며 이를 통해 유체가 하상에 미치는 모멘텀의 크기를 파악하였다. 복잡한 난류 흐름 구조에 대해서는 팔분원 분석 (octant analysis)을 통해 구분했으며, 유사가 움직이는 순간의 유속장을 기반으로 유사 이송을 발생시키는 지배적인 난류 흐름 특성에 대해 규명하였다. 본 연구는 바닥 경계층 내 복잡한 3차원 난류 흐름과 유사 입자의 움직임을 동시에 분석함으로써 기존에 수행되어왔던 선행 연구들의 한계점을 극복하고 보다 명확한 유사 이송의 발생 원인에 대해 분석했다는 점에 의의가 있다.

• Journal of computational fluids engineering
• /
• v.16 no.2
• /
• pp.94-101
• /
• 2011

The fast pyrolysis characteristics of lignocellulosic biomass are investigated for a bubbling fluidized bed reactor by means of computational fluid dynamics (CFD). To simulate multiphase reacting flows for gases and solids, an Eulerian-Eulerian approach is applied. Attention is paid for the primary and secondary reactions affected by gas-solid flow field. From the result, it is scrutinized that fast pyrolysis reaction is promoted by chaotic bubbling motion of the multiphase flow enhancing the mixing of solid particles. In particular, vortical flow motions around gas bubbles play an important role for solid mixing and consequent fast pyrolysis reaction. Discussion is made for the time-averaged pyrolysis reaction rates together with time-averaged flow quantities which show peculiar characteristics according to local transverse location in a bubbling fluidized bed reactor.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.34-37
• /
• 2009

Deforming mesh should be used when bodies are deforming or moving relative to each other due to the presence of aerodynamic forces and moments. Also, the flow solver for such a flow problem should satisfy the geometric conservation law to ensure the accuracy of the solutions. In this paper, a RANS(Reynolds Averaged Navier-Stokes) solver including automatic mesh capability using TFI(Transfinite Interpolation) method and GCL is developed and applied to flows induced by oscillating wings with given frequencies. The computations are performed both on deforming meshes and on rigid meshes. The computational results are compared with experimental data, which shows a good agreement.

• Journal of computational fluids engineering
• /
• v.15 no.1
• /
• pp.37-45
• /
• 2010

Deforming mesh should be used when bodies are deforming or moving relative to each other due to the presence of aerodynamic forces and moments. Also, the flow solver for such a flow problem should satisfy the geometric conservation law to ensure the accuracy of the solutions. In this paper, a RANS(Reynolds Averaged Navier-Stokes) solver including automatic mesh capability using TFI(Transfinite Interpolation) method and GCL is developed and applied to flows induced by oscillating wings with given frequencies. The computations are performed both on deforming meshes and on rigid meshes. The computational results are compared with experimental data, which shows a good agreement.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.291-292
• /
• 2011

우리나라 뿐만 아니라 미국 해양에서도 기름 유출사고가 발생하여 많은 생태계 피해가 있었으며, 앞으로도 발생할 가능성이 크다. 해수유동예측모델 실행 웹 포털은 기름 유출과 같은 해양사고에 빠르게 대응하기 위해 고안되었다. 한국과학기술정보연구원에서 제공하는 그리드 자원을 이용하여 신속한 관측자료 수집 및 입력자료 생성으로 해수흐름을 빠르고 정확하게 예측하기 위해 개발되었으며, 사고 발생 시 해수유동예측으로 오염물질의 경로 예측과 생태계 피해를 최소화하는데 기여하고자한다.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.2 s.28
• /
• pp.147-152
• /
• 1998

In this study turbine flowmeters were used to predict volumetric flow rate of each phase in two-phase, gas-liquid, flowing in a vertical tube. To determine volumetric flow rates of two-phase, air-water, flowing vertically upward through the polycarbonate tube(57mm ID-inside diameter), two turbine flow meters were used. For void fraction measurements, two gamma densitometers were used at each location of the turbine flow meter, one at the upstream and the other at the downstream. It was determined that the turbine flowmeter's outputs were a function of actual volumetric flow rate of each of the two phases. A two-phase flow model was developed.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.175-184
• /
• 1998

본 연구에서는 제한된 수로를 운항하는 선체주위의 유동특성에 관한 연구를 수행하고자 하였다. 일반적으로 운하 또는 하천을 운항하는 선박의 경우 제한된 수심의 영향으로 천수효과가 발생하게 된다. 이러한 천수의 효과와 제한된 폭의 영향으로 선수부분에서 선체보다 선행하는 파도가 전파되어 나아가기도 하며, 이로 인하여 선박은 보다 많은 조파저항을 받게 된다. 본 연구에서는 임의의 형상을 갖는 선체가 폭과 수심이 제한된 운하를 임계속도 근처에서 운항하는 경우에 관하여 폭과 수심을 변화시켜가며 수치계산을 수행하여, 제한수로에서의 임의의 선체주위의 유동특성을 관찰하고자 하였다. 수치계산은 MAC(Marker And Cell)법을 기초로 한 유한차분법(Finite Difference Method)을 사용하였으며, 계산에 사용된 격자계는 임의의 형상에 관하여 격자생성이 용이한 직사각형 격자계(Rectangular Grid System)를 사용하였다.