• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.422-425
• /
• 2001

권선형 유도전동기는 기동시에 충분히 큰 저항을 외부에서 삽입하여 기동전류를 작게하는 동시에 기동 토크를 크게 할 수 있다. 또한, 유도전동기의 각 기동 방식중에서 가장 우수한 시동특성을 가지고 있으며 크레인, 시멘트공장 등 중부하 시동이 요구되는 경우 널리 사용되고 있다. 권선형 유도전동기 드라이브 시스템의 전류, 토크, 위치 및 속도 등의 제어를 위하여 일반적으로 산업현장에서는 Pl 제어기가 많이 적용되고 있다. 그러나 이러한 시스템은 센서 부착시 여러가지 환경적 제약으로 인한 전체시스템의 성능 저하를 가져올 수 있어 이를 개선하기 위한 센서리스 벡터제어가 활발히 연구되고 있다. 본 논문은 권선형 유도 전동기의 센서리스 벡터제어를 위해 MRAS 기법을 적용하였고, 기존의 MRAS 기법 적용시 발생하는 파라미터 변동에 따른 속도추정오차를 개선하기 위해 센서리스 벡터제어의 속도제어에 크게 영향을 미치는 고정자 저항을 온라인으로 튜닝함으로서 파라미터 변화에 강인한 센서리스 속도제어를 구현하였다. 제안된 기법의 타당성 및 유효성을 디지털 컴퓨터에 의한 시뮬레이션에 의해 확인하였다.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.485-489
• /
• 2011

In previous reports, the treatment of Bacillus amyloliquefaciens strain EXTN-1 showed a broad diseasecontrolling spectrum to the plant diseases caused by viral, bacterial, and fungal pathogens as well as the promotion of plant growth. In mechanisms of EXTN-1, treatment of EXTN-1 increased oxidative burst in early stage and induced the expression of resistance genes, PR-1a, PDF1.2. Mechanism involved in induced systemic resistance by EXTN-1 was revealed as simultaneous activation of SA and JA or ethylene metabolic pathways. The purpose of this study was to determine whether B. amyloliquefaciens EXTN-1 has a similar effect on rice plant against Rice stripe tenuivirus (RSV) under greenhouse conditions. When rice seeds were soaked in B. amyloliquefaciens strain EXTN-1, rice plants showed significant systemic resistance against RSV as well as promoted growth. In the case of plant growth, in 30-day old plants treated with B. amyloliquefaciens EXTN-1, the heights, weights, and lengths of roots increased by 12.6%, 9.8%, and 16.0%, respectively confirming the effects of PGPR. When the induced systemic resistance to RSV was examined, in 20-day old plants were treated with B. amyloliquefaciens EXTN-1, the heights, weights, and lengths of roots increased by 8.4%, 10.9%, and 4.8%, respectively compared to the control. Induced systemic resistance was more prominent in susceptible cultivars - Chucheong and Ilpum compared to the resistant cultivar, Nakdong.

• Korean journal of applied entomology
• /
• v.53 no.2
• /
• pp.141-147
• /
• 2014

Pinewood nematode (PWN: Bursaphelenchus xylophilus) is known to kill pine tree species that are indigenous to countries where the pest was inadvertently imported, but some cultures from the extraction of dead pines do not damage trees. Experiments were conducted to examine the effect of pre-inoculation of these low-pathogenic pinewood nematode on resistance of pine trees against the pest species. The pre-inoculated pine saplings showed induced resistance which lasted for a year, and repeated inoculation of these low-pathogenic nematodes enhanced tree resistance. All nematode samples extracted from dying or dead pines that had been killed not more than three months before the extraction were pathogenic, and most of those extracted from pines that had been killed 2-3 years before were low-pathogenic. When inoculated in pine saplings, number of low-pathogenic nematodes settled, as studied two days after inoculation, was not different from that of pathogenic ones. However, as studied after 30 days of inoculation, rate of reproduction in low-pathogenic nematodes was far lower than that of pathogenic nematodes. The rate of reproduction of several nematode isolates growing on fungal mat media of Botrytis cinerea varied, but three of four low-pathogenic isolates showed same level of reproduction rates as pathogenic ones.

• Geophysics and Geophysical Exploration
• /
• v.24 no.4
• /
• pp.171-179
• /
• 2021

We outline a process for estimating Cole-Cole parameters from time-domain induced polarization (IP) data. The IP transients are all inverted to 2D Cole-Cole earth models that include resistivity, chargeability, relaxation time, and the frequency exponent. Our inversion algorithm consists of two stages. We first convert the measured voltage decay curves into time series of current-on time apparent resistivity to circumvent the negative chargeability problem. As a first step, a 4D inversion recovers the resistivity model at each time channel that increases monotonically with time. The desired intrinsic Cole-Cole parameters are then recovered by inverting the resistivity time series of each inversion block. In the second step, the Cole-Cole parameters can be estimated readily by setting the initial model close to the true value through a grid search method. Finally, through inversion procedures applied to synthetic data sets, we demonstrate that our algorithm can image the Cole-Cole earth models effectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.493-502
• /
• 2016

This study examines how rock condition affects the variation of the chargeability and electrical resistivity of the rock. In the theoretical study, the relationship correlating chargeability with the variables affecting it is derived. A parametric study utilizing the derived relationship reveals that the size of narrow pores ($r_1$) is the most influential factor on chargeability, and the salinity of pore water ($C_0$) is the second. In the laboratory experiments, small scale rock fracturing zone is modelled using sand stone. Chargeability and resistivity are measured by changing the size of the joint aperture, the location of fractured zone and the existence of clay gouge and/or clay layer which shows lower chargeability than the sand stone layer in the multi-layered ground. Test results show that chargeability is controlled not by the rock fracturing condition but by the size of narrow pore ($r_1$) where each line of current flow passes through. Also, the chargeability decreases with increase of the pore water salinity ($C_0$). In conclusion, the ground condition can be identified more efficiently by measuring the induced polarization along with the electrical resistivity; identifying the existence of sea water, the layered ground and/or the fractured rock becomes more reliable.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.117-122
• /
• 1996

본 연구에서는 2개사에서 제조된 합금 600 및 합금 690 이음매 없는 관과 진공 유도 용해로 제조한 합금 690 판재에 대하여 부시 환경의 변화에 따른 특성 평가를 행하였다. 부식 평가는 양극 분극 시험을 통하여 행하였으며 부식 환경은 NaCl, HCl, NaOH(＋$Na_2$SO$_4$) 용액 및 Cu$^{＋}$/Cl$^{－}$ SO$_4$$^{2－}$ 용액이었다. 합금 600 및 합금 690의 양극 분극 저항성을 부식 환경에 따라 평가한 결과, 부식 용액의 종류에 따라 서로 다른 분극 거동을 보이고 있으며, 합금 690의 저항성이 합금 600의 저항성보다 우수하게 나타났다. 또한 가성 용액 중에 $Na_2$SO$_4$를 첨가할 경우 부식 속도를 가속화시키고 있다. 한편 Mo이 첨가되지 않은 합금 690M0의 경우는 Cl$^{－}$ SO$_4$$^{2－}$ 비가 증가할수록 공식 저항성이 급격히 감소하고 있으나, Mo이 첨가된 합금 690M2의 경우는 시험한 전체 비율에서 이온의 영향을 받지 않는 것으로 나타나고 있어 합금 690의 공식 저항성에 Mo이 매우 좋은 효과를 보이고 있음을 알 수 있다.

• Korean Journal of Environmental Biology
• /
• v.18 no.1
• /
• pp.47-51
• /
• 2000

Phytophthora blight of pepper, which is caused by Phytophthora capsici Leonian, is not only the most destructive disease worldwide, but also difficult to control effectively. It has been needed to have new trials for effective control to the disease. We employed radiation hormesis of gamma ray as the new trial in the control strategy. Two cultivars, Kwangbok and Dabok, were used to analyse whether gamma ray radiation can induce disease resistance. The germination rate of pepper seeds was significantly enhanced by the radiation at all dose levels. Stimulatory effect for resistance induction was found to differ between cultivars. It was confirmed that the remarkable effect was induced in Dabok and depended on radiation dosage. Disease resistance at 4 Gy was much higher than that of control. On the other hand, no detectable induction effect for resistance was observed in Kwangbok which was moderate resistant cultivar to gamma ray radiation. [Hormesis, Gamma ray, Pepper, Phytophthora blight, Resistance induction].

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.962-966
• /
• 2009

In this paper, N-way resistance power divider is described for wideband frequency characteristic. For this, we derived in design equation of a N-way resistance power divider using 3-way resistance power divider. We designed 8-way resistance power divider that can divide same power by 7 output and measurement result of fabricated resistance power divider is observed to prove the validity of derived design equation. Fabricated resistance power divider shown equal power division ratio and reflection loss displayed excellent characteristic by about -25dB in broadband from DC to 3GHz.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1568-1569
• /
• 2011

최근 기후변화로 인해 낙뢰의 발생빈도가 크게 증가하고 있으며 이에 따라 피뢰시스템의 중요성이 부각되고 있다. 피뢰시스템의 원활한 기능을 수행하기 위해 접지시스템의 성능이 보장되어야 하며, 접지전극은 뇌격전류를 안전하게 대지로 방류시켜야 한다. 본 논문에서는 피뢰시스템에서 가장 흔하게 사용되는 수직접지전극을 대상으로 서지전류가 인가되었을 때 접지전극이 묻힌 대지저항률, 접지전극의 길이, 서지 전류의 파두시간 등에 따른 규약접지임피던스를 측정하고 그 특성을 분석하였다. 그 결과 대지저항률이 높은 토양과 접지전극의 길이가 짧은 경우 접지임피던스가 감소하는 용량성 특성이 지배적으로 나타나며, 대지저항률이 작고 접지전극의 길이가 긴 경우 접지임피던스가 증가하는 유도성 특성이 지배적으로 나타났다. 따라서 피뢰시스템을 위한 접지시스템 설계 시 대지저항률 및 접지전극의 길이를 고려하여 유도성 특성을 최소화 할 수 있도록 설계해야 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.202-202
• /
• 2013

유도결합 플라즈마 방전 시 사용되는 L형 임피던스 정합기(impedance matcher)의 경우 일반적으로 직렬 및 병렬 콘데서가 연결되어있으며, 임피던스 정합조건이 되었을때 전원과 안테나 사이에 있는 임피던스 정합기의 소자값이 특정 값을 가지게 된다. 유도결합 플라즈마를 진단하기 위한 여러 방법들이 연구되어 왔지만, 이러한 임피던스 정합조건과 플라즈마 내부 변수들의 상관 관계에 대한 연구는 보고된 바 없다. 본 연구에서는 유도결합 플라즈마의 임피던스 정합조건과 유도결합 플라즈마의 변압기 회로모델를 이용하여 플라즈마 저항 및 플라즈마 인덕턴스를 구하기 위한 관계식을 도출하고 임피던스 정합기의 직렬 및 병렬 콘덴서 용량값 측정하여 플라즈마 저항 및 플라즈마 인덕턴스값을 계산하였다. 결과 검증을 위해 다양한 압력 및 전력 조건에서 부유랑뮤어 탐침법을 이용하여 플라즈마 밀도를 측정해 비교해 보았으며, 두 결과의 경향성은 잘 일치함을 확인하였다.