• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.810-818
• /
• 2021

A leakage current of ESS is classified mainly by the occurrence from a PCS(Power Conditioning System) section and an unbalanced grid current. The reason for the leakage current from the PCS section is a voltage change by IGBT (Insulated Gate Bipolar Transistor) switching and stray capacitance between the IGBT and heatsink. The leakage current caused by the grid unbalanced current flows to the ESS through the neutral line of grid-connected transformer for the ESS with a three limb iron type of Yg-wire connection. This paper proposes a mechanism for the occurrence of leakage current caused by stray capacitance, which is calculated using the heatsink formula, from the aspect of the PCS section and grid unbalance current. Based on the proposed mechanisms, this study presents the modeling of the leakage current occurrence using PSCAD/EMTDC S/W and evaluates the characteristics of leakage currents from the PCS section and grid unbalanced current. From the simulation result, the leakage current has a large influence on the battery side by confirming that the leakage current from the PCS is increased from 7[mA] to 34[mA], and the leakage current from an unbalanced load to battery housing is increased from 3.96[mA] to 10.76[mA] according to the resistance of the housings and the magnitude of the ground resistance.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.4
• /
• pp.11-17
• /
• 2022

Currently, the income and funds of the local economy are flowing out to the metropolitan area, and talented people, the driving force for regional development, also gather in the metropolitan area, and the local economy is facing a serious crisis. Local currency is issued by local governments and is a currency with auxiliary and complementary functions that can be used only within the area concerned. In order to revitalize the local economy, as local governments have focused their attention on the introduction of local currency, studies on the issuance and use of local currency are continuously being conducted. In this study, by using big data from data materials such as portals and SNS, the consumer image of local currency issued in local governments was identified through big data analysis, and based on the research results, the issuance and operation of local currency was conducted. The purpose is to present implications for The results of this study are as follows. First, by inducing local consumption through the policy issuance of local currency, it is showing the effect of increasing the economic income of the region. Second, local governments are exerting efforts to revitalize the economy and establish a virtuous cycle system for the local economy by issuing and distributing local currency. Third, the introduction of blockchain technology shows the stable operation of local currency. With academic significance, it was possible to grasp the changed appearance and effect of local currency through big data analysis and the policy direction of local currency.

• Journal of Naturopathy
• /
• v.11 no.1
• /
• pp.39-50
• /
• 2022

Background: It is essential to investigate the functionality of the newly developed knobble shoe. Purpose: The purpose was to explore how the body shape and balance change when wearing knobble shoes. Methods: Nine subjects wearing knobble shoes after walking for a month were analyzed. Results: For knobble shoes, we created various small air pockets in the insole to stimulate the soles of the feet to induce body changes. In particular, it was to promote the arch part of the foot by making a large lump inside and outside the center of the foot's arch. After wearing knobble shoes and using them for 30 days, the average blood sugar decreased by 31.1 mg. The lowering range was 5 to 120 mg. In one patient, the result of the hemoglobin test decreased by 7.5% to 6.5%. In the shoulder tapping test for a body balance test, seven subjects leaned to the right in a barefoot state, and two people to the left. However, after wearing shoes, all of them maintained equilibrium. knobble shoes fit, and balance was all stable. There were two subjects with a short left and four subjects with a short right. Conclusions: Blood sugar decreased after wearing the knobble shoes. The deformed shape of the body was restored to its original state by the knobble supporting the foot arch area. The balance of the sole directly affects the overall posture.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.91-96
• /
• 2021

The enhancement of thermoelectric figure of merit was achieved by the simple processes of sieving and high energy ball milling, respectively, which are enable to reduce the grain size of n-type Bi₂Te₃ thermoelectric materials. By optimizing the grain size, the electrical conductivities and thermal conductivities were controlled. In this study, spark plasma sintering was employed for hindering the grain growth during the sintering process. The thermoelectric figure of merit was measured to be 0.78 in the samples with 30 min high energy ball milling process. Notably, this value was 40 % higher than that of pristine Bi₂Te₃ sample. This result shows the properties of thermoelectric materials can be readily controlled by optimization of grain size via simple ball milling process.

• Journal of Life Science
• /
• v.32 no.2
• /
• pp.142-147
• /
• 2022

Oxysterols are known to be involved in the physiopathology of atherosclerosis. Since 7-ketocholesterol (7-KC) is found in large amounts in oxysterols and in atherosclerotic plaque, the study on how 7-KC may affect monocyte differentiation induced by phorbol myristate acetate (PMA) in the monocytic cell line, THP-1, is essential. 7-KC induced a dose-dependent reduction in cell proliferation without inducing cytotoxicity, and the substantial staining of Nile red demonstrates the increased absorption of intracellular lipids. Although 7-KC itself did not increase cell adhesion, it markedly decreased the adhesion of cells treated with PMA. Furthermore, by observing the effect of 7-KC on phagocytosis using fluorescent-labeled latex beads, 7-KC's ability to abolish phagocytosis in PMA-stimulated macrophages was illustrated. The effect of 7-KC on the expression of selected protein markers on the process of differentiation induced by PMA in THP-1 cells was also examined. 7-KC inhibited expression of ICAM-1, CD11a, SR-A1, and SR-B2 (CD36) in PMA-stimulated THP-1 cells. Conversely, 7-KC drastically increased the expression of SR-D1 (CD68)in PMA-stimulated THP-1 cells. In conclusion, these results suggest that 7-KC modulates monocyte differentiation and activation via the intracellular accumulation of lipid droplets.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.3
• /
• pp.66-73
• /
• 2022

In order to induce users to purchase excellent products in the water industry that satisfy the technical standards of excellent products, in this study, it is to present the advantages of the cost aspect of the pumps as the objective basis. It will be to promote technology development of domestic water companies and to create a virtuous cycle structure in the water industry. In order to present an objective basis for the merits in terms of cost, an economic evaluation was conducted through life cycle cost analysis. For the LCC analysis, initial cost (pump cost and installation cost), operation cost (energy cost and maintenance cost) and demolition cost (disposal cost and residual value) are searched and calculated. As the results of comparison on two capacity of pumps, the energy cost of the excellent pump is 212 million KRW lower than the that of general pump in the large pump. The cost of excellent pump was 17 million KRW lower than that of general pump in small capacity pump. As the results of sensibility test, if the product is developed in the direction of improving pump efficiency and increasing the replacement cycle of consumables, it is predicted that the effect on LCC will be large.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.249-256
• /
• 2022

The implant prosthesis of anterior maxilla requires careful consideration in planning. In order to satisfy both esthetic and functional needs of a patient, fusion of intra-oral scan in Cone-beam computed tomography (CBCT) and facial scan can be considered. Bony structures and soft tissues captured in CBCT and occlusal surfaces of intra oral scan were incorporated into personal characteristics from facial scan. The patient had insufficient buccal bone on maxillary anterior area. The maxillary implants could not be placed on the most ideal position. However, the "top down" approach completed by computer-generated arranging of teeth in implant planning and surgery with surgical guide resulted in esthetically and functionally satisfying result regardless of the limitation. Careful diagnosis with digital technique and the usage of surgical guide resulted in successful surgery and esthetic restoration. The temporary fixed prostheses were designed, restored and evaluated. The patient was not satisfied with the first design of temporary prosthesis, which showed uneven space distribution between teeth due to the position of maxillary implant. The design was modified by changing proximal emergence contours and line angle to alter the perceived since of incisors. The patient was satisfied with the new design of provisional restoration. A digital occlusion analyzer (Arcus Digma II, KaVo, Leutkirch, Germany) was used to measure inherent condylar guidance and anterior guidance of a patient to provide a definitive prosthesis.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.7
• /
• pp.57-64
• /
• 2007

This study proposes a method to estimate drilling torque during ground boring with an aid of electrical energy required for rotating a boring-auger. Ground boring is commonly used in geotechnical engineering such as preboring precast pile installation, soil-cement grouting, ground exploration and so forth. In order to understand the correlation between required electrical energy to rotate the boring auger and the drilling torque, a small laboratory apparatus was designed and a pilot study was performed. The apparatus rotates common drill bits of $D=5{\sim}25mm$ in CBR specimens. The velocity of a bit is 19 RPM and predefined using a reduction gear which connects a main rotation axis to a 25 Watts AC electrical motor shaft. In the middle of drilling the motor current increments and the drilling torque were measured and the correlation between the current and the torque was obtained through linear square fits. Based on the correlation the acquired motor current during drilling was applied to predict the drilling torque in consequent testing and the prediction results were compared to the measured torque. The comparison leads a conclusion that the motor current during drilling using electrical power may be a good indicator to estimate/determine strength characteristics of the ground.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.117-125
• /
• 2023

In this study, the anti-inflammatory and anti-oxidative activities were compared for the extracts of non-fermented Ligustrum japonicum fruits (LJF) and fermented counterparts. U se of Latilactobacillus curvatus (L. curvatus) and Weissella minor (W. minor), isolated from the Jeju Chromis notata, as fermented strains led to the extracts of LJF-LC and LJF-WM in this experiment. The yield of each fermented extract (LJF-LC and LJF-WM) was 40.5 ~ 46.0%, higher than 29.5% of non-fermented extract (LJF). As a result of an activity experiment using RAW 264.7 macrophages stimulated by lipopolysaccaride (LPS), it was confirmed that LJF-WM, a fermented extract, has an excellent effect of inhibiting NO production in a concentration-dependent manner without cytotoxicity. Upon the screening of DPPH and ABTS⁺ radical scavenging activities, the fermented LJF-LC and LJF-WM showed comparable to the non-fermented LJF. In the study of cell protection effect using HaCaT keratinocytes damaged by hydrogen peroxide (H₂O₂), the fermented LJF-WM indicated protective effect against oxidative stress. In addition, quantitative analysis of a major constituent salidroside by HPLC indicated about 15.6 mg/g for the LJF-LC and 13.9 mg/g for the LJF-WM, which were higher than that of non-fermented LJF (12.0 mg/g). Based on these results, it was suggested that the fermented extract from L. japonicum fruits could be used as a natural cosmetics material with anti-inflammatory and anti-oxidative effects.

• Analytical Science and Technology
• /
• v.20 no.6
• /
• pp.516-523
• /
• 2007

Purification of silica mineral has been investigated by acid leaching of pulverized silica. A series of studies has been carried out on the effect of leaching silica powder as a function of the leaching time at the constant temperature of $80^{\circ}C$ in oxalic acid, aqua regia, and two mixed acids of HF/HCl, $HF/HNO_3$. The impurities of silica and leachantes were measured by neutron activation analysis (NAA), inductively coupled plasma atomic emission spectrometry (ICP-AES), atomic absorption spectrometry, x-ray fluorescence (XRF) method and wet analysis (WA). Certain metals, such as sodium, calcium, iron, aluminium and titanium, have been found in concentrations of hundreds or even thousands of mg/kg. Comparison of purification processes of silica and analytical methods of impurities in the silica was conducted in this study.