• Journal of Life Science
• /
• v.17 no.5 s.85
• /
• pp.664-670
• /
• 2007

The propolis is natural product produced by honeybees and is known to have many biologically useful properties such as anti-microbial, anti-oxidative and anti-tumorigenic activity. However, its radio-protective property has not been well studied. To investigate radio-protective effect of propolis on mouse testis, mice were supplemented with propolis after 5 Gy irradiation. The histological changes of testis were detected by TEM. The results indicate that propolis may protect tissue deformation which is induced by 5 Gy of ionizing radiation. Furthermore, to elucidate the potential molecular mechanisms involved in radio-protective property of propolis, we performed microarray experiments using oligo DNA microarray. We found 65 up-regulated genes and 224 down-regulated genes, whose expression levels were affected more than 2-fold by propolis treatment in mice irradiated at 5 Gy. We confirmed microarray data with reverse transcription-PCR using gene specific primers. The results of RT-PCR are highly correlated with those of microarray. These results may help understanding molecular mechanisms of radioprotective effects by propolis in mouse model.

• Korean Journal of Food Science and Technology
• /
• v.7 no.3
• /
• pp.148-153
• /
• 1975

Seven toxigenic molds isolated from deteriorated rice in Korea, Aspergillus clavatus, Asp. flavus var. columnaris, Asp. fumigatus, Asp. ochraceus, Penicillium citrinum, Pen. implicatum, and Pen. islandicum, were examined for their sensitivity toward Co-60 gamma rays for survival. Conidia of all tested species showed survival curves of sigmoidal type, from which decimal reduction doses were found to vary in the range of $14{\sim}33$ krad, induction doses, in the range of $12{\sim}56$ krad and inactivation factors at 200 krad, in the range of $4.6{\sim}12.8$, all at a dose rate of 11.56 krad/min. Dose rate effects on the radiosensitivity of Asp. flavus and Pen. islandicum conidia indicated that the higher dose rate (11.56 krad/min) caused decreases in decimal reduction doses as compared with the lower dose rate (2.67 krad/min).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.4
• /
• pp.261-269
• /
• 2019

This study investigates a method of designing pixel-type frequency selective surfaces(FSS) with flexibility while considering factors, such as polarization and incident angle. Among the various methods used to solve the discrete space problem when designing a pixel-type FSS, the binary particle swarm optimization(BPSO) algorithm is one of the most applicable techniques to determine the periodic structure pattern of an FSS. Therefore, a method of efficiently designing FSS with roll-off band pass characteristics using an improved BPSO algorithm is proposed. To solve the convergence problem in the fitness function design to induce particles in the desired solution, FSS with desired roll-off wave characteristics can be easily obtained by applying a fitness function using "slope" as an input parameter.

• International Area Studies Review
• /
• v.15 no.2
• /
• pp.175-196
• /
• 2011

The developing countries have a lot of dormant resources, attempting the take-off of economic growth. The theory of 'vent for surplus' and Lewis model provide a good cornerstones to analyze the effect of export, FDI and domestic production on employment. This paper attempts to do empirical test to figure out what factor is significant as the determinant of Chinese employment. For this test, the estimation equations are derived from the Cobb-Douglas production function. The results are that the domestic production affects the most positive employment, compared to FDI and export. Unlikely general expectation, export doesn't have an substantial effect on employment in China. It is also found that the absorption of technology through export is lower than that of FDI in terms of the effect of technology on employment. So it is suggested that the employment policy should be shifted toward the increase of domestic production by using FDI rather than by promoting export industry. to reduce the internal imbalance.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.101-107
• /
• 2018

In wireless sensor network technology, which has been applied to various fields, the power supply and the power management of sensors are the most important issues. For this reason, a new concept of power supply and power management device is required. In this paper, we developed an autonomous independent power supply system that supplies the stable power to a sensor node without an additional external input by applying the energy harvesting technology using the electromagnetic induction principle by utilizing the current flowing in the transmission line. The proposed autonomous independent power supply system consists of a power supply using Power CT and a power management system including a charging circuit. The power management device uses a voltage limiter circuit and a monitoring circuit of charging voltage and current to ensure the safety of charging of the battery. In order to verify the performance of the proposed system, we applied it to the SVL diagnostic system and confirmed that it operates stably.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.55-61
• /
• 2019

To improve bus service quality and passengers' safety at bus stops, it is necessary to analyze the relationship between bus stopping behaviors and bus stop conditions. Thus, this study investigated the proper stopping rate at 31 bus stops on Central Boulevard in Busan metropolitan city and analyzed the relationship between the proper stopping rate and bus stop operating conditions such as the length of berth, the distance from the front line of berth to bus shelter and so on. The analysis results show that the proper stopping rate is 45.82 % and the rates are closely related to each bus stop operating condition. Therefore, it is highly recommended that the front line of berth should be located parallel to bus shelter for improving the safety of bus passengers. In addition, it is suggested that the length of berth should be longer than 15m and the pavement marking of berth be redesigned with dash lines to take account of buses' entering and leaving the berth.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.73-73
• /
• 2019

전나무속(Abies Miller, 1754)은 지구상에서 북반구를 중심으로 50여 종이 현존하고 있다. 전나무속은 주로 높은 고도의 산지 또는 수목 한계선 주변에 자연적 분포지를 형성하고 있으며, 국내에는 전나무(A. holophylla), 분비나무(A. nephrolepis) 및 구상나무(A. koreana), 총 3종이 자생하고 있다. 하지만 국내에 자생하는 3종의 경우도 쇠퇴가 급격히 진행되고 있다. 특히 대한민국 특산식물인 한라산의 구상나무는 IUCN Redlist 상의 'Threatened species' category 종으로 등재되어 있을 뿐만 아니라 구상나무 어린 나무(치수)의 수가 급격히 줄어 우리 사회에서 문제가 직면한 '저출산 고령화 사회'와 유사하다고 할 수 있다. 하지만, 구상나무의 어린 나무에 관한 연구가 미비한 실정이다. 게다가 선행연구에서도 어린 나무의 기준이 모호하다. 따라서 본 연구는 구상나무 등 국내 자생하는 구상나무 천연묘의 기준을 정립하여 추후 진행되는 구상나무 등 전나무속 어린 나무에 관한 연구에 표준화를 유도할 수 있을 것으로 기대된다. 우선, 국내.외 소나무과 어린나무에 관한 논문을 정리 및 분석하였고, 구상나무 어린나무가 자생하는 숲의 구조(제주조릿대 등) 및 환경(암석노출도) 등)에 적절한 높이와 아린흔의 갯수를 참고로 기준안을 제시해 보고자 한다. 본 연구의 기준안은 선행연구에서 조사된 구상나무 어린나무 3,138개체의 높이 및 아린흔 갯수를 토대로 구분해볼 수 있었다. 우선, 높이에 대한 기준은 1년생묘(당해묘, 5cm 미만)-유묘(5cm~10cm 미만)-성묘(대묘, 10cm~30cm 미만)-치수(30cm~100cm 미만) cf.전생치수-유목(100cm 이상) 5단계로 구분되었다. 아린흔 갯수에 대한 기준도 또한 1년생묘(1개)-유묘(2개~6개)-성묘(대묘, 7개~15개)-치수(16개~20개) cf.전생치수-유목(21개 이상) 5단계로 구분되었다.

• The Journal of the Korean dental association
• /
• v.57 no.3
• /
• pp.149-160
• /
• 2019

Atrophic alveolar ridge of maxillary anterior area is commonly observed after the extraction of teeth in patients with severely compromised periodontal disease, causing difficulties with implant placement. Successful esthetics and functional implant rehabilitation rely on sufficient bone volume, adequate bone contours, and ideal implant positioning and angulation. The present case report categorized the ridge augmentation techniques using guided bone regeneration (GBR) on the maxillary anterior site by Seibert classification. Case I patient presented for implant placement in the position of tooth #11. The alveolar ridge was considered a Seibert classification I ridge defect. Simultaneous implant placement and GBR were performed. Eight months after implantation, clinical and radiological examinations were performed. Case III patient presented with discomfort due to mobility of the upper maxillary anterior site. Due to severe destruction of alveolar bone, teeth #11 and #12 were extracted. After three months, the alveolar ridge was considered a Seibert classification III ridge defect. A GBR procedure was performed; implantation was performed 6 months later. Approximately 1-year after implantation, clinical and radiological examinations were performed. During the whole treatment period, healing was uneventful without membrane exposure, severe swelling, or infection in all cases. Radiographic and clinical examinations revealed that atrophic hard tissues and buccal bone contour were restored to the acceptable levels for implant placement and esthetic restoration. In conclusion, severely resorbed alveolar ridge of the maxillary anterior area can be reconstructed with ridge augmentation using the GBR procedure so that dental implants could be successfully placed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.643-652
• /
• 2021

Accidents or faults in the transmission and distribution system are never completely avoidable, and short-circuit and earth faults are occurs despite the efforts of the TSO and DSO. Recently, the connection to the transmission and distribution system of large-capacity new and renewable distributed power has increased rapidly and has various effects on the operation of the system. In order to minimize this, connection standards such as FRT (Fault-Ride-Through) have been established to provide wind turbines or solar inverters. In the event of a major faults of the power system, the operation support shall be provided so that the operator can stably operate the system by smoothly performing connection maintenance or rapid system separation. In this paper, in order to appropriately determine whether the FRT condition, which is the grid connection criterion for a representative DERs, is sufficient, a detection system using a PMU (Phasor Measurement Unit) that measures a synchro-phasors was designed and deployment and a system accident due to a generator step-out to analyze and evaluate the proposed system based on the case.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1583-1590
• /
• 2020

In this study, activity of anti-oxidation of Cinnamomum loureiroi extract (CLE). In order to measure anti-oxidation effect of CLE, phenol content of CLE, radical scavenging activity of ABTS and DPPH, and decrease of ROS production. Before the experiment, against Raw 264.7 cell, a cytotoxicity was measured and the result showed no toxicity. CLE's total polyphenol amount was 397.7±8.3 mg/g and the total flavonoid amount was 101.899±0.885 mg/g. As a measurement result of ABTS radical scavenging ability and DPPH radical scavenging ability, radical scavenging ability increased depends on the concentration. CLE's effect on the ROS creation was checked and the result showed that CLE suppressed ROS creation by showing a meaningful decrease of ROS generation. From all of the results, CLE is know to have an antioxidant effect. These results will be provided as fundamental data for further development of the new material of functional cosmetics to the results above.