• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.04a
• /
• pp.70-71
• /
• 1998

1. 서론 : 상업적으로 널리 사용되고 있는 cellulose acetate, polysulfone 등과 같은 막 소재는 유기용매에 대한 화학적 안정성이 떨어지므로 새로운 막분리 소재가 필요로 되고 있다. 기계적 강도, 열적 안정성이 뛰어난 Polyimide 는 거의 모든 종류의 유기용매에 대한 안정성이 우수하여 비수계용 한외여과의 분야에서 높은 잠재력을 지니고 있다. 그러나 Polyimide 는 대부분의 유기용매에 녹지 않으므로 상전환방법에 의한 비대칭막을 제조하기가 어려웠다. (생략)

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.42-45
• /
• 1994

정밀화학, 제약산업 등에 필요한 에탄올, IPA 등과 같은 유기용매를 고순도로 농축하는 공정은 유기용매와 물과의 혼합물이 일정 농도에서 공비점을 형성하여 일반 증류로는 분리하기 힘들어 Benzene, Cycloheaxane 드의 Entrainer를 첨가하여 상대휘발도를 변화시켜 분리하는 공비증류가 이용되고 있다. 그러나 공비증류는 에너지 사용량이 많고 유독한 물질을 사용하므로 투과증발법과 같은 저에너지 소비형, 환경 친화적인 공정에 대한 관심이 높아지고 있다. 투과증발법에 의한 유기용매 농축공정은 물과의 친화성이 높은 비다공성 막을 이용하여 선택적으로 물을 투과하여 유기용매를 탈수하는 방법으로 투과를 위한 Driving force는 Feed side와 Permeate side사이의 Chemical potential gradient로 이는 물에 대한 Partial vapor pressure differnece로 다음과 같이 표시된다. $\Delta \mu_{F/P.W} = RT ln\frac{y_WP_P}{x_W\gamma_WP_{o.W}}$ 따라서 투과속도를 높이기 위해서 Permeate side를 진공상태로 하여 투과하는 물질을 기화시키고 이를 다시 응축하여 Permeate side의 압력을 낮게 유지시켜야 한다.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.696-701
• /
• 1999

The enzymatic hydrolysis of Castor oil for the mass production of ricinoleic acid was studied to find out the optimum conditions such as solvents and the weight ratio of substrate to enzyme. Three different lipases were tested for the hydrolysis of castor oil: lipase from Porcine Pancrease(lipsase PP), lipase from Candida cylindracea(lipase CC), lipase from Candida Rugosa(lipase CR). The poor mass transfer in water caused a low degree of hydrolysis of castor oil. To overcome this problem, organic solvents were used. Among organic solvents tested, hydrophobic solvents gave better results of hydrolysis than hydrophilic solvents. Organic solvents also lowered or changed the effect of pH. Isopropyl ether made complete hydrolysis of castor oil. The ratio of water to isopropyl ether and the ratio of weight ratio of lipase to castor oil were important for the hydrolysis of castor oil. At 30$^{\circ}C$ castor oil was completely hydrolyzed by 4 wt% of lipase in the mixture of isopropyl ether and water(1:1 in volume).

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.31-31
• /
• 1993

지금까지 내유기용매성 분리막의 소재로는 Polysulfone이 많이 사용되었으나 내유기용매성이 고도로 요구되는 분야에는 적합하지 않았다. 이의 해결을 위해서 Polyimide를 소재로한 분리막의 개발에 대한 연구가 많이 진행되고 있다. 그러나 Polyimide는 내열성, 내유기용매성 등이 우수한 반면 T$_g$가 높고 용해되지 않아서 가공하는데 많은 제약이 있는 단점을 가지고 있다. 또한 기존에 널리 사용되었던 2단계 합성방법, 즉 Polyimide 전구체인 Polyamic acid를 합성하고 이를 casting하여 film을 얻은 뒤 다시 고온으로 열처리하여 Polyimide를 제조하는 방법은 공정이 번거롭고 부분적으로 불용성을 나타내기도 하였다. 본 연구에서는 1단계 용액 증합법으로 용융성 Polyimide를 합성하여 이를 소재로 내유기용매성 분리막을 제조하였다. 1단계 중합벙는 Polyamic acid를 합성하고 이를 film으로 만드는 공정이 필요치 않으며, 공정이 비교적 간단하고 경제적으로 유리한 잇점이 있다.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.124-134
• /
• 2016

The main goal of this study was to investigate biomodification mechanism of lignin by white rot fungus, Abortiporus biennis, and to depolymerize ethanol organosolv lignin for industrial application. In nitrogen-limited culture, A. biennis polymerized mainly lignin showing a rapid increase of molecular weight and structural changes depending on incubation days. At the initial incubation days, cleavage of ether bonds increased phenolic OH content, while the results were contrary in of the later part of the culture. Based on these results, ascorbic acid as a reducing agent was used to induce depolymerization of lignin during cultivation with white rot fungus. As a result, the degree of increase of average molecular weight of lignin was significantly declined when compared with those of the ascorbic acid free-experiment, although the molecular weight of fungus treated sample slightly increased than that of control. Furthermore, lignin derived oligomers in culture medium were depolymerized with the addition of ascorbic acid, showing that the average molecular weight was 381 Da, and phenolic OH content was 38.63%. These depolymerized lignin oligomers were considered to be applicable for industrial utilization of lignin. In conclusion, A. biennis led to the polymerization of lignin during biomodification period. The addition of ascorbic acid had a positive effect on the depolymerization and increase of phenolic OH content of lignin oligomers in medium.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.258-258
• /
• 2009

본 연구에서는 P3HT(Poly(3-hexylthiophene-2))와 PCBM ([6,6]-phenyl-C61-butyric acid methyl ester)를 donor, acceptor물질로 사용하고 Toluene, DCB, CB를 용매로 함으로써 각각의 경우에 대한 효율과 특성을 분석하였다. 그 결과, CB을 이용한 태양전지가 후 열처리 과정을 거친 후 가장 높은 효율을 보였으며, 광흡수율 측면에서는 열처리를 하였을 경우와 하지 않은 경우 모두에서 DCB가 뛰어났으나 다른 용매에 비하여 열처리를 통한 성능의 개선 효과는 가장 미비하였다.

• Journal of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.377-382
• /
• 1986

Racemic tris-oxalatocobaltate (III) complex ions were optically resolved by an optical active complex, ${\Delta}$-tris-ethylenediamine cobalt (III), and then racemization of ${\bigwedge}-[Co(ox)_3]^{3-}$ obtained was investigated in various mixed solvent such as water-organic solvent (organic solvents=ethanol, iso-propyl alcohol, acetone, and dioxane). The rate of racemization was increased with following order; water < ethanol < acetone < isopropyl alcohol < dioxane; which is the same order for polarizability of organic solvent added. Considering ${\Delta}H^{\neq},\;{\Delta}S^{\neq}$ and above facts for the racemization of ${\bigwedge}-[Co(ox)_3]^{3-}$, it seems to be twist mechanism of plausible mechanisms.

• Journal of Bio-Environment Control
• /
• v.19 no.3
• /
• pp.147-152
• /
• 2010

Poor fruit set during winter period is one of the biggest problem in plastic tunnel watermelon cultivation. Hand pollination is inevitable to maximize fruit set of the winter watermelon. Productivity and viability of pollen grain and organic solvents for pollen storage were investigated. All cultivars produced more than 10 mg/flower except for 'Kumchun' cultivar. Pollen amount per flower were 13.8 mg in 'Bok' and 12.1 mg in 'Speedkul'. Germination rate of pollen grains incubated at $30^{\circ}C$ right after soaking in pentane solvent were 76% in 'Kumchun' as the lowest and 92% in 'Apollokul' as the highest. The pollen of 'Bok' showed the highest germination rate by 75% after a 15-day storage in pentane. All cultivars showed their pollen germination rate below 25% after a 24-day storage. Among the cuitivars, speed of pollen tube growth in vitro were relatively lower in 'Kumchun' and 'Sambokkul' by below $50\;{\mu}m/hr$. Pollen tube of these cultivars tended to burst during its elongation on the medium. Pollen stored 24 hrs in organic solvents showed 45, 39, 34, 23, and 19% of germination in pentane, ethyl ether, n-hexane, ethyl acetate, and acetone, respectively. Compared with light condition, pollen viability was higher in darkness during pollen storage in organic solvents. Pollen grain was susceptible to the organic solvent. The viability of pollen grains seems to be influenced greatly by duration of soaking pollen in organic solvent and the polarity of solvents. Organic solvent damages surface of pollen grain and extent of damage was varied by the solvents.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.363-367
• /
• 2005

The effects of organic solvent on the charge transport behavior of poly (3,4-ethylenedioxythioph one)/p-toluene-sulfonate(PEDOT-OTs) are investigated. The use of different organic solvents during the oxidative chemical polymerization of 3,4-ethylenedioxythiophene (EDOT) with Iron(III) -tosylate can greatly vary the DC conductivity of PEDOT-OTs along with molecular structure and doping concentration. For example, PEDOT-OTs prepared from methanol shows the conductivity of 19.5 S/cm, which is an increase by a factor of $10^8$ compared to PEDOT-OTa prepared from acetone. From the X-ray diffraction (XRD) experiments, it was found that PEDOT-OTs with ketone is amorphous state, while PEDOT-OTs with alcoholic solvent shows the better defined crystalline structure in which the charge transport along and between the PEDOT chains are promoted. Chemical analysis employing X-ray photoelectron spectroscopy (XPS) revealed that the doping concentration of PEDOT-OTs with alcoholic solvent is much higher than that of PEDOT-OTs with ketones. It is proposed that the interactions between the organic solvent and doping anion can cause the variation in doping concentration and, therefore, result in the PEDOT-OTs of different conductivities and chain structures.

• Journal of the Korean Chemical Society
• /
• v.53 no.4
• /
• pp.427-431
• /
• 2009

The thermodynamical mechanism of the extraction of soybean isoflavones from soybean residuals using organic solvent method has been studied. On the basis of experiments, a simple model for determining the distribution coefficients in organic solvent extraction was employed to calculate the thermodynamical functions between $K,\;{\Delta}H^0,\;{\Delta}S^0\;and\;{\Delta}G^0$ in the soybean isoflavones extraction process. The results show that the soybean isoflavones extraction is an endothermic and an entropy-increasing process: the ${\Delta}G^0$ decreases when the temperature arises.