• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.98-98
• /
• 1994

최근 청색반도체레이저의 실현을 위하여 ZnSe가 대표하는 II-Ⅵ족 화합물반도체와 Gan가 대표하는 III족 질화물반도체분야에서 집중적인 연구가 이루어지고 있으며, 아직까지 실용화 되지 않고 있는 청색반도체레이저의 출현에 대하여 많은관심이 모아지고 있다. III족 질화물반도체는 InM(Eg:1.9eV)부터 AIN(Eg: 6.2eV)에 이르기까지 전 조성영역에서 완전한 고용체를 이루며, 실온에서 직접천이형 에너지 대구조를 가지므로 청색 혹은 자외영역에서 동작하는 발광소자를 제작하는데 있어 유망시 되고 있는 소재이다. 특히 GaN와 InN의 3원흔정인 GaInN를 활성층으로 이용하면 그 발전파장을 370nm부터 650nm까지 즉 가시 전 영역으로부터 근 자외영역을 포함할 수 있게 된다. 이 연구에서는 AIGaN/GaInN 이중이종접합(DH) 구조의 고아여기에 의한 유도방출고아의 편광 특성을 조사하였다. 유기금속기상에피텍셜(MOVPE)법으로 성장한 AIGaN/GaInN DH 구조의 표면에 수직으로 펄스 발진 질소레이저(파장: 337.1cm, 주기 10Hz, 폭: 8nsec) 빔을 조사하고 DH구조의 단면으로부터의 유도방출광을 편광기를 통과 시킨 후 스펙트럼을 측정하였다. 입사고아 밀도가 증가함에 따라 약 402nm의 파장에서 유도발출에 의한 가도가 큰 피크가 나타났고, 그 반치폭은 약 18meV이었다. 실온에서 AIGaN/GaInN DH 구조로 부터의 유도방출에 필요한 입사광밀도의 임계치는 약 130㎾/$\textrm{cm}^2$이었다. 한편 편광각이 90$^{\circ}$일때는 발광스펙트럼의 강도가 매우 낮고 단지 자연방출에 의한 스펙트럼만이 나타났다. 편광각이 0$^{\circ}$일 때 최대의 방출광 강도를 나타내었으며, 편광각이 -90$^{\circ}$로 회전함에 따라 발고아강도의 강도가 감소하였다. 이와 같은 결과는 광여기에 의하여 AIGaN/GaInN DH 로 부터의 유도방출광이 GaInN활성층의 단면에 평행한 전기장의방향으로, 즉 TE모드로 선형적으로 편광됨을 의미한다. AIGaN/GanN DH 로 부터의 유도방출이 선형적으로 TE모드로 편광되는 것은 이 구조를 이용한 청색 및 자외선 반도체 레이저다이오드의 실현에 매우 유익한 것이다.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.2
• /
• pp.135-144
• /
• 2016

Korean government has invested about 400 million dollars to the business incubator using the facilities and human resources of universities and research institutes and successfully operated to contribute the economic development(1.6 billion dollars sales, 5,500 companies) and job creation(16,000 employee) in the end of 2013. Although incubators have grown rapidly, there is limited performance, like a hardware centered support, limited exploitation of resource in the university, less collaboration with the community, less star companies. This research provide a alternative capacity building direction based on the creativity and resource dependence theory. Specifically this paper suggest a building creative incubating center, traversing the valley of death, accelerator for the CPM(Capability, Product, Market) linkage, organic implementation of university resources.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.413-419
• /
• 1994

The determination of the neuromuscular blocking agents vecuronium bromide(VeBr) in biological fluids has been investigated. The method depends on the formation of insoluble red complex between vecuronium bromide and rose bengal in aqueous layer. The amount of vecuronium bromide was calculated from that of extracted rose bengal which was determined by spectrofluorimetry or HPLC/fluorescence detection method. It was possible to analyze VeBr in the range of $2{\sim}32{\mu}g/ml$(r=0.998 for water soln., 0.999 for urine, 0.996 for plasma). This method was applied to the analysis of VeBr in biological fluids, urine and plasma.

• Korean Journal of Environment and Ecology
• /
• v.17 no.3
• /
• pp.268-275
• /
• 2003

The purpose underlying this study is to evaluate tourism development impacts from analyzing residents' and tourists' perceptions. Questionnaire surveys were carried on Kanhyun area in Kangwondo, Korea. Generally, residents in the area perceive positive economic impacts due to tourism development, however levels of employment and economic independence of the locality are perceived low. Sociocultural changes also bring negative aspects in life and residents' awareness of environmental impacts show far more negative. Tourists' satisfaction levels with the area and the management attributes are relatively high. Some suggestions are made based on the result of the survey to help the area to be more successful as a tourist destination. More comprehensive research is needed for the future study.

• Journal of the Korean Geographical Society
• /
• v.29 no.4
• /
• pp.420-437
• /
• 1994

The starting point of the research is the relation between capital restructuring and urban restructuring. The economic restructuring, which has been caused by the economic crisis in the early 1970s in the United States has brought a spatial restructuring at different geographic scales. The degree of the success of urban restructuring is contingent to the local economic and political environments. The local contingent factor such as local politics should not be neglected for investigating the restructuring process. Through the case study of Chicago, the research provides two inconsistencies in applying the structural approach to the local level: first, the lack of the theoretical link between crisis and restructuring; and second, the crucial importance of local politics in shaping urban development.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.9 no.2
• /
• pp.56-60
• /
• 2011

Purpose: The optimal dose of oximes for use in the treatment of organophosphorus pesticide poisoning has not been conclusively established. In this retrospective study, we assessed the effectiveness of the use of high-dose pralidoxime infusion in treating organophosphorus pesticide poisoning. Methods: From January 1998 to December 2009, 71 patients visited the hospital Emergency Department (ED) as a result of organophosphate pesticide intoxication. All of these patients received an initial bolus of 2 g of pralidoxime as the first step of treatment. Patients who then received continuous infusion of pralidoxime at a dose of 500 mg/hr were entered into study group 1 (low dose), and those treated by continuous infusion of pralidoxime at a dose of 1000 mg/hr were entered into study group 2 (high-dose). Plasma cholinesterase activities for each patient were evaluated at ED arrival and re-evaluated 24 hours after pralidoxime infusion. The effectiveness of the two treatment modalities was gauged by comparing the required duration of mechanical ventilation, time spent in the intensive care unit (ICU) and total time spent in the hospital. Results: The mean duration of mechanical ventilation was $9.98{\pm}6.47$ days for group 1 and $4.39{\pm}6.44$ days for group 2. The respective mean duration of time spent in ICU and the total number of days in the hospital were $16.38{\pm}18.84$ days and $21.87{\pm}20.16$ days for group 1, and $7.83{\pm}9.99$ days and $11.71{\pm}13.53$ days for group 2. Highdose pralidoxime treatment was associated with shorter required durations for mechanical ventilation, ICU and hospital stay. In addition, plasma cholinesterase reactivation rates were higher for those patients receiving high-dose pralidoxime treatment. Conclusion: The results suggest that high-dose pralidoxime treatment has greater efficacy for patients suffering from organophosphorus pesticide poisoning.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.11a
• /
• pp.63-63
• /
• 2002

현재 기계적 합금화법에서는 주로 합금을 구성하는 성분원소 분말을 불활성분위기에서 볼밀처리 함으로써 함금화를 시키거나 모합금에 산화물을 분산시켜 복합화시키는 공정을 통하여 각종 화합물, 비정질상 및 과포화고용체등의 준안정상의 합성 뿐만이 아니라 초미세조직의 생성에 관한 폭 넓은 분야의 연구가 행하여지고 있다. 한편 MA에서는 볼멀처리중 기계적 에너지의 투여에 의하여 실제 반응온도보다 낮은 온도에서 발생하는 특이한 화학반응 즉 Mechanochemical 반응을 일으키 기도 한다. 본 연구에서는 헤마타이트($Fe_20_3$)와 금속윈소인 Ti의 MA처리에 의하여 고상환원반응 을 유기시켜 $Fe-TiO_2$계 nanocomposite 분말재료를 제조하고자 한다. 특히 MA 공정에 있어서 자기 물성의 변화와 X선 회절을 통하여 고상환원반응에 의한 복합분말의 생성과정을 조사하였다. 출발원료는 $Fe_20_3$(고순도화학제,99.9%, 평균입경 0.1$\mu\textrm{m}$)와 금속원소인 Ti(99.9%, 명균업경 150$\mu\textrm{m}$)을 몰비 2:3의 조성이 되도록 하여 MA를 실시하였다. 볼멀은 고에너지 유성형 볼밀장치(독일 제, Fritsch P-5)를 이용하였으며 진공치환형 용기에 원료분말을 장입하여 2회정도 진공배기한 후 아르곤 가스를 충전하여 볼밀을 행하였다. 얻어진 분말시료에 대하여 x-선 회절장치, 전자현미경 (SEM) 및 진동시료형자력계(VSM)를 통하여 결정구조, 미셰조직 빛 자기특성을 조사하였다. $Fe_2O_3-Ti$ 혼합분말의 MA처리 에 의하여 초기단계부터 환원반응과 함께 $Fe_3TIO_{lO}$ 중간상이 관찰 되었으나 30hrs의 MA처리 후 Fe와 산화물 $TiO_2$로 모두 환원되어 $Fe-TiO_2$계 나노복합분말이 얻어짐을 알 수 있었다. 이 때 X션 회절피크의 line broadening으로부터 복합분말의 Fe 명균 결정립 크기는 24nm로 초미세 결정럽의 분말합금이었다. 포화자화값은 볼밀처리에 따라 점점 증가하여 MA 30시간에는 20.3emu/g로 포화됨을 알 수 있었다. 또한 보자력 Hc는 MA초기단계에 350e로 매우 낮으나 30시간 후에는 Hc값이 2600e로 매우 큰 값을 나타내었다. 이것은 환원반응결과 초기에 생성된 Fe의 결정립이 비교적 크고 결정결함이 적으나 볼밀처리를 30시간까지 행하면 Fe 결정렵의 미세화 빛 strain 증가로 magnetic hardening이 일어나기 때문인 것으로 사료된다.

• Journal of the Korean Magnetics Society
• /
• v.4 no.4
• /
• pp.347-354
• /
• 1994

The structural change and magnetic properties of mechanically milled Fe-N and Mn-Al alloy powders have been investigated by XRD, TEM, VSM, $M\"{o}ssbauer$ spectroscopy and inelastic neutron scattering measurements. During milling of ${\gamma}'-Fe_{4}N$ powders, and fcc ${\gamma}'-Fe_{4}N$ phase is transformed to a bct ${\alpha}'-Fe(N)$ phase by stress-induced martensitic transformation, being accompanied by an initial increase in saturation magnetization. During annealing the bct ${\alpha}'-Fe(N)$ nanocrystalline phase which is obtained by mechanical grinding for a long time, an ${\alpha}'-Fe_{16}N_{2}$ phase partially appears as an intermediate phase at 673~773 K, causing an increase in saturation magnetization. During milling of Mn-45, 70 and 85 at.% Al mixed powders, Al atoms are partially solubilized into an ${\alpha}-Mn$ phase. The Al supersaturated ${\alpha}-Mn-type$ phases change from paramagnetic to ferromagnetic : the saturation magnetization is 11 emu/g for the as-milled Mn-70 at.% Al powders. Moreover, by removing almost all Al atoms from the as-milled Mn-85 at.% Al powders using chemical leaching, the saturation magnetization increases up to 36 emu/g. The above bct ${\alpha}'-Fe(N)$ and ferromagnetic ${\alpha}-Mn$ type alloys are the magnetic materials found for the first time, by using the present mechanochemical process.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.140-151
• /
• 2019

It is to assess the indoor air quality of the chemical hazardous materials exposed to the fire after firefighters returned to the fire scene. The research subject randomly selected four fire stations located in Seoul, Korea. Two fire stations were set up as control groups after the return of the firefighting activities at the actual fire scene, and two other fire stations were set up as control groups to measure the air quality of the room at normal levels regardless of the action. We conducted 24-hour monitoring for all fire accidents that occurred in Seoul Metropolitan using fire safety map computer system. Also, indoor air quality was measured immediately after homecoming if the experiment group was to be dispatched due to an accident of intermediate or larger scale. 11 hazardous substance items such as fine dust, formaldehyde, volatile organic compounds, PAH, VCM, acidity, asbestos, CO₂, NO₂, O₃ were measured according to the process test method. Three of 11 types of harmful substances exceeded domestic and foreign standards, and one of them was found to be close to foreign standards. In particular, total volatile organic compounds, carbon dioxide and sulfuric acids were 2.5 times, 2.2 times and 1.1 times higher than the standard. Also, for formaldehyde and sulfuric acid, it was measured higher in the control group than in the case group. This findings could be used in policies to improve indoor air quality in the fire station of the Seoul Metropolitan Government.

• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.136-148
• /
• 2006

A foundry makes various machinery parts made by iron. For manufacturing machinery parts, they usually uses wooden mold with molding sand and pour the molten iron into wooden mold through inlet. A foundry have many processes including Furan process, In Furan process workers prepares a wooden mold in the molding sand. So they fixes wooden mold in sand housing and then they fill the molding sand in the sand housing. Molding sand should be sticky enough to sustain the shape of wooden mold, so several materials are needed to prepare the suitable molding sand. The first step of Furan process is making the molding sand with molding sand and Voltaic Organic Compounds (VOC) and the second step of Furan process is pour the molding sand into the wooden molding housing. This two step of process generated noxious VOC and various size of dust. So the process is very dirty and dangerous one. Because of these, Workers frequently shrink out of the plant. The company related with foundry usually faced on the difficult situation for engagement and always have shortage of hiring problem. Through this study, we developed a system which removes toxic VOC and dust simultaneously. We design and construct real system and install it at real plant. Before setting up this system, the working surroundings VOC (for formaldehyde) 15 ppm and Dust(for $PM_{10}$) $8,000{\mu}g/m^3$. After setting up this system, working surroundings is improved by VOC (for formaldehyde) 0 ppm, Dust(for $PM_{10}$) $4{\mu}g/m^3$, and the work evasion factor is removed. So we contribute to solve hiring problem of this company and increasing the productivity also.