• Journal of the Korean earth science society
• /
• v.39 no.6
• /
• pp.519-532
• /
• 2018

We investigated the effect of galactic plane toward molecular motion and kinematics in the northern filament (NF) of Orion Molecular Clouds Complex (OMC) using $^{12}CO$ (J=1-0) line. Observed data were from three areas including NF1, NF2, and NF3 in far-out order from galactic plane, for a total 270 hours by Seoul National University Radio Astronomy Observatory (SRAO) 6m telescope, with 2arcmin spatial resolution. galactic plane and OMC NF were connected to each other along the magnetic field at a density of 3% for $^{12}CO$ (J=2-1) and 9% for the case of dust. $^{12}CO$ (J=1-0), $^{12}CO$ (J=2-1), and interstellar dusts were distributed uniformly in NF3, but only in certain regions with relatively high density in NF1 and NF2. NF showed a single structure, partial shrinking motion in NF1, and rotational motion at the bottom of NF2, and spiral rotation associated with magnetic field only in NF3. The position-velocity analysis showed that the materials including $^{12}CO$ (J=1-0) could flow toward galactic plane along NF2 and NF3. However, there was no clear cause for the material to flow toward galactic plane in this result. Further detailed observation for rotational motion at the top of NF1 and NF2 might help to confirm it.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.1
• /
• pp.80-99
• /
• 2018

In premodern society, the central spaces in local counties were known as Eupchi (邑治), in which Gwan-a (官衙). The Eupchi located in seaside counties were in Eupseong, whereas the Eupchi of inland counties only included a Gwan-a, and did not have a fortress. Yanggeun-gun (楊根郡) and Jipyeonghyeon (砥平縣), which currently form Yangpyeong-gun (楊平郡), were counties where only Gwan-a existed. At present, there are few traces of the Gwan-a in Yanggeun and Jipyeong. In addition, it is impossible to exactly verify the history, scale and location of these two Gwan-as. Therefore, this study attempts to make a rough estimation of the histories, scales and sites of these Gwan-a by analyzing the relevant literature and ancient maps that are scattered according to the principles of spatial organization of local Gwan-a. The Yanggeun and Jipyeong Gwan-a appear to have been built in the early Joseon period. There are three reasons for this assertion: First, in Yanggeun and Jipyeong, Suryeong (守令) were first officially appointed after the early Joseon period. Once Suryoeng were appointed to such counties, the Gwan-a in which they would serve could be established. Second, the Dongheon (東軒) in Yanggengun and the Gaeksa (客舍) in Jipyeonghyeon were rebuilt in 1703 (29th year of the reign of King Sukjong) and 1465 (11th year of the reign of King Sejo), respectively; thus; the Gwan-a must have existed since the early Joseon period.. Third, in Yanggeungun, the Hyanggyo (鄕校) had existed since the early Joseon period, as the Joseon government necessarily established the Hyanggyo in areas where Suryeong were established. The facilities of local Gwan-a in the Joseon period were largely divided into gonghae (公?), educational institutes, and alters. The gonghae was a facility in which the Suryeong and Gwanwon (官員) managed administrative, judicial and military affairs, and consisted of the A-sa (衙舍), Hyeongcheong (鄕廳), Jackcheong (作廳), Gaeksa (客舍), Gungwancheon (軍官廳), and so on. The education institute was called a Hyeonggyo, while alters included the Sajikdan (社稷壇), Seonghwansa (城隍祠) and Yeodan (?壇). Both the Yeongeun and Jipyeong Gwan-a also consisted of such facilities as A-sa, Hyangcheong, Jakcheong, Gaeksa, Gungwancheong, Hyeonggyo, Changgo, Sajikdan, Seonghwangsa, Yeodan, Saryeongcheong, Jiincheong and Gwannocheong. The present sites for both Gwan-as cannot be identified with any certitude. However, they can be roughly identified by connecting the related literatures, oral statements and relics with the principles of spatial organization of local Gwan-a in the Joseon period. ${\bullet}$ Address of the Yanggeun A-sa (Dongheon): the whole of # 15, Gwanmun 1-gil, Yangpyeong-eup (Yanggeun-ri 151) in front of Yanggeun Junior High School at present. ${\bullet}$ Address of Yanggeun Gaeksa: around the Yangpyeong police station at present. ${\bullet}$ Address of Jipyeong A-sa(Dongheon): the whole of Jipyeong-ri 248-250, Jipyeong-myeon at present. ${\bullet}$ Address of Jipyeong Gaeksa: the whole of Jipyeong-ri 238, Jipyeong-myeon at present.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.2
• /
• pp.138-153
• /
• 2018

The purpose of this study was to analyze , which was made in the late Joseon Dynasty to specify the vegetation landscape of the Donhwamun Gate area in Changdeokgung Palace. The study results can be summarized as below. First, based on "Jieziyuan Huazhuan(芥子園畵傳)", the introductory book of tree expression delivered from China in the 17th century, allowed the classification criteria of the trees described in the picture to be established and helped identify their types. As a result of the classification, there were 10 species and 50 trees in the Donhwamun Gate area of . Second, it was possible to measure the real size of the trees described in the picture through the elevated drawing scale of . The height of the trees ranged from a minimum of 4.37 m to a maximum of 22.37 m. According to the measurement results, compared to the old trees currently living in Changdeokgung Palace, the trees described in the picture were found to be produced in almost actual size without exaggeration. Thus, the measured height of the trees turned out to be appropriate as baseline data for reproduction of the vegetation landscape. Third, through the Rubber Sheeting Transformation of , it was possible to make a ground plan for the planting of on the current digital topographic map. In particular, as the transformed area of was departmentalized and control points were added, the precision of transformation improved. It was possible to grasp the changed position of planting as well as the change in planting density through a ground plan of planting of . Lastly, it was possible to produce a three-dimensional vegetation landscape model by using the information of the shape of the trees and the ground plan for the planting of . Based on the three-dimensional model, it was easy to examine the characteristics of the three-dimensional view of the current vegetation via the view axis, skyline, and openness to and cover from the adjacent regions at the level of the eyes. This study is differentiated from others in that it verified the realism of and suggested the possibility of ascertaining the original form of the vegetation landscape described in the painting.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.31-40
• /
• 2019

In Korea, 51,013 thousand tons of livestock manure was generated in 2018. A total of 46,530 thousand tons, which is 91.2% of the total amount of livestock manure generated, was treated by composting(40,647 thousand tons) or liquid fertilization(5,884 thousand tons) method. At present, the policy of livestock manure treatment in Korea is to make livestock manure into organic fertilizer(compost, liquid fertilizer) and then to applicate it on agricultural land. And this policy is very effective in terms of livestock manure treatment and nutrient recycling. However, considering the steadily declining farmland area for decades, the use of livestock manure compost could be limited in the future. There is also concern that local nutrient overloading, nutrient management regulation, and restrictions on the number of livestock may become serious problem for livestock manure treatment. In addition, there are some opinions that nutrient derived from livestock manure may flow into tributaries of major dams. In recent years, there has been a suspicion that fine dust may be generated from livestock manure compost. In recent years, the use of livestock manure fertilizer has been rapidly increasing, there is a growing demand of the development of new technologies for livestock manure treatment. Especially, cow excretes a larger amount of manure than other livestock, so that the efficiency of development of new technology for cow manure treatment will be high. Therefore, in this study, the combustion characteristics of cow manure pellet were investigated in order to analyzed whether cow manure could be used as source of solid fuel. During the combustion test, the weight loss of the cow manure pellet began to increase when the temperature of the combustion chamber reached $300^{\circ}C$. The ratio of $H_2$, $CH_4$, CO in the pyrolysis gas produced in the pyrolysis process of cow manure pellet were 6.65~11.62%, 0.58~1.54 and 11.47~14.07%, respectively.

• Journal of Environmental Impact Assessment
• /
• v.27 no.6
• /
• pp.548-561
• /
• 2018

The objectives of this study were to construct a three-dimensional (3D) hydrodynamic and water quality model (EFDC) for the river reach between the Daecheong dam and the Sejong weir, which are directly affected by Gap and Miho streams located in the middle of the Geum River, and to evaluate the trophic status and water quality improvement effect according to the flow control and pollutant load reduction scenarios. The EFDC model was calibrated with the field data including waterlevel, temperature and water quality collected from September, 2012 to April, 2013. The model showed a good agreement with the field data and adequately replicated the spatial and temporal variations of water surface elevation, temperature and water quality. Especially, it was confirmed that spatial distributions of nutrients and algae biomass have wide variation of transverse direction. Also, from the analysis of algal growth limiting factor, it was found that phosphorous loadings from Gap and Miho streams to Sejong weir induce eutrophication and algal bloom. The scenario of pollutant load reduction from Gap and Miho streams showed a significant effect on the improvement of water quality; 4.7~18.2% for Chl-a, 5.4~21.9% for TP at Cheongwon-1 site, and 4.2~ 17.3% for Chl-a and 4.7~19.4% for TP at Yeongi site. In addition, the eutrophication index value, identifying the tropic status of the river, was improved. Meanwhile, flow control of Daecheong Dam and Sejong weir showed little effect on the improvement of water quality; 1.5~2.4% for Chl-a, 2.5~ 3.8% for TP at Cheongwon-1 site, and 1.2~2.1% for Chl-a and 0.9~1.5% for TP at Yeongi site. Therefore, improvement of the water quality in Gap and Miho streams is essential and a prerequirement to meet the target water quality level of the study area.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.86-109
• /
• 2009

Mireuksa Temple was founded during the reign of King Mu of Baekje(AD 600-641). The circumstance of the construction of this temple is documented in "Memorabilia of the Three Kingdoms (Samgukyusa)". The pagoda named stone pagoda at Mireuksaji temple stands outside the main sanctuary of the western area. The south and west sides of the stone pagoda have completely collapsed, leaving only the eastern facade of six of its levels intact. Through the recent discovery of sarira reliquary we can see that the erection of this pagoda was in 639. So owing to accumulation of excavation results about Baekje temple site and vigorous academic exchange, it is possible that architecture of western pagoda at Mireuksaji temple can be understood in connection with the architectural development of wooden pagoda from 6th to early 7th century in East Asia. So this study is on the consideration of building of this pagoda putting first structure of upper part and cross-shaped space in 1st floor. It was considered that the material characteristics as stone could be applied to the temple pagoda architecture of large scale. The results are as follows. First, it had been built in recognition that the outer and inner part of pagoda should be separated. As it is the expression of structural system in temple pagoda architecture of large scale at that time. In pagoda there was a self-erected structure and the members of outer part of it were constructed additionally. Second, in Mireuksaji stone pagoda there is central column with stones. With inner part of pagoda it can be regarded as mixed structural system that constitutes central contral column and inner structural part. And it could be a kind of middle step to more developed structure of whole as wooden pagodas in Japan. Third, as the sarira reliquary was in central column on the first floor, the cross-shaped space could be made. The formation of this space was so on the natural meaning of sarira that the concept as memorial service of graves could be apllied to the pagoda. The style of tomb in Baekje was expressed to the space of 1st floor in pagoda where Sarira had been mstalled. That was not only effective presentation of symbolic space but also easier method in the use of same material.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.318-345
• /
• 2013

This study was carried out with a focus on the factor on the periodical space organization of Daebodan (大報壇: the altar of great recompense) in Changdeok Palace, which is significant in terms of political history in the late Chosun Dynasty, and consider the factors in the formation of the structural system through historical records and drawings. Daebodan has the ideology of righteousness to the Ming Dynasty which the hierarchy of the Joseon Dynasty. who felt the crisis of the domination order, imposed as a solution after the Manchu war of 1636. In addition, Daebodan was built by complex factors that entailed the self-esteem of the 'Joseon Centralism Ideology (朝鮮中華)' and the desire of the sacrificial rituals for Heaven that were imminent to the kings of Joseon. Superficially, Daebodan has the spatial organization of the Sajik (社稷) Altar and the placement of an annex building, but had the applied placement due to limited topography and access to the backyard. Furthermore, the lateral structure of Daebodan multiply accepted various factors of the nine step's stairs, the hight of five cheok (尺), the circumstance of two floors that were showed in the altar and platform with small fences and an imperial order including the internal form of Hwangjangbang (黃帳房). Moreover, the name of the alter came from 'the Jiaote Sheng Book of Rites(禮記 郊特牲)' representing 'the suburban sacrifice ritual for Heaven (郊天)', and it was built by not only combining the system of the Sajik Altar in the Joseon Dynasty and China but also avoiding 'excessive etiquette (僭禮).' The point is a remarkable feature shown by the structural system of Daebodan. Thus, it is considered that the 'Notion of Confucian-Cultural Succession (中華繼承意識)' and the desire of the sacrificial rituals for Heaven were expressed by the structure and form of altar. This study examined the process of the creation, expansion, decline and disposal of Daebodan in a chronological order, and found that the ruling ideology of the governing elite by the political and cultural background of the era at each transitional point was reflected in the spatial formation of the altar. On the other hand, as a result of performing a field survey to find the location in accordance with Daebodan in drawing materials, there remains items such as worked stones from Daebodan, precast pavers and fragments of proof tile discovered in the surrounding of tora vine (Actinidia arguta) which is a natural monument of Changdeok Palace. As such, verification through future excavation and investigation is required.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.3
• /
• pp.106-130
• /
• 2009

The aim of this paper is analysis of structure and development pattern about wooden coffin and chamber tombs in Gyeongju from the 2nd century B.C. to the 3rd century A.D. for researching to socio-political tendency and growth process of Sarokuk. Tombs buried with iron objects were built in Youngnam(嶺南) from the 2nd century B.C. with spread wooden coffin with stone mound(積石木棺墓). Also medium or small sized wooden coffin tombs buried with bronze mirror of western Han(前漢) and soft stoneware(瓦質土器) were appeared the 2nd century B.C. in Gyeongju, because of establishment of Han's commanderies(漢郡縣) in the Korean Peninsula and refuge from Daedong river(大同江) to Jinhan(辰韓). Separate tombs(獨立墓) with lots of bronze object ware assumed high ranked tombs of parsonage(司祭王) or local chief(地域首長). From the 2nd century A.D. the size of wooden coffin tombs became enlarged and funerary objects ware abundant, for example Sarari 130th tomb(舍羅里 130號). The burying pattern of this tomb is similar to wooden chamber tombs in Lelang(樂浪), which had prestige goods like lacquer ware and bronze mirror in wood box(木匣) beside coffin. Appearance of these wooden chamber tombs that were different from original wooden coffin tombs imply interaction between Lelang and these area with iron. Sarari community that held right of trade and distribution to outside through the geographical advantage grew up centered position in Gyeongju politically, socially, and culturally. Chamber in tomb as a new structural notion that can secure funerary objects became firmly was established from the 2nd century A.D. in Gyeongju and large sized wooden chamber tombs were generally built early of the 3rd century A.D. This tendency was reflected in stratification of community and growth as center of local state. After late of the 3rd century A.D. Gyeongju type wooden chamber tomb(慶州式木槨墓) which had subordinate outer coffin(副槨) was appeared and then subordinate outer coffin was as bigger as main chamber(主槨) the 4th century A.D., because of centralization and stratification in society and unification of various communities among the Gyeongju area.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.581-588
• /
• 2019

MRI is superior when contrasted to help the organization generate artifacts resolution, but also affect the diagnosis and create a image that can not be read. Metal is inserted into the tooth, it is necessary to often be inhibited in imaging by causing the geometric distortion due to the majority and if the difference between the magnetic susceptibility of a ferromagnetic material or paramagnetic reducing them. The purpose of this study is to conduct a metal artefact in accordance with the analysis using a diamagnetic material. The magnetic material include a wire for the orthodontic bracket and a stainless steel was used as a diamagnetic material was used copper, zinc, bismuth. Testing equipment is sequenced using 1.5T, 3T was used was measured using a SE, TSE, GE, EPI. A self-produced phantom material was used for agarose gel (10%) to a uniform signal artifacts causing materials are stainless steel were tested by placing in the center of the phantom and cover inspection of the positive cube diamagnetic material of 10mm each length.After a measurement artefact artifact zone settings area was calculated using the Wand tool After setting the Low Threshold value of 10 in the image obtained by subtracting images, including magnetic material from a pure tool phantom images using Image J. Metal artifacts occur in stainless steel metal artifact reduction was greatest in the image with the bismuth diamagnetic materials of copper and zinc is slightly reduced, but the difference in degree will not greater. The reason for this is thought to be due to hayeotgi offset most of the susceptibility in bismuth diamagnetic susceptibility of most small ferromagnetic. Most came with less artifacts in image of bismuth in both 1.5T and 3T. Sequence-specific artifact reduction was most reduced artifacts from the TSE 1.5T 3T was reduced in the most artifacts from SE. Signal-to-noise ratio was the lowest SNR is low, appears in the implant, the 1.5T was the Implant + Bi Cu and Zn showed similar results to each other. Therefore, the results of artifacts variation of diamagnetic material, magnetic susceptibility (${\chi}$) is the most this shows the reduced aspect lower than the implant artificial metal artifacts criteria in the video using low bismuth susceptibility to low material the more metal artifacts It was found that the decrease. Therefore, based on the study on the increase, the metal artifacts reduction for the whole, as well as dental prosthesis future orthodontic materials in a way that can even reduce the artifact does not appear which has been pointed out as a disadvantage of the solutions of conventional metal artifact It is considered to be material.

• Korean Journal of Ecology and Environment
• /
• v.52 no.2
• /
• pp.105-117
• /
• 2019

In order to investigate the characteristics of benthic macroinvertebrate communities in the Gihwa stream, a tributary of the Dong River, we surveyed the community and environmental factors in April and November 2013 at 6 sites. The benthic macroinvertebrate taxa represented total 63 species belonging to 29 families, 12 orders, 5 classes and 4 phyla. Total 48 (10~28 in each site) species were collected in April and 44 (13~24 in each site) in November. The number of individuals increased slightly from $560{\sim}2,290m^{-2}$ in April to $806{\sim}3,674m^{-2}$ in November. Chironomidae spp. was dominant species in April and Stenopsyche bergeri was dominant species in November. In the Functional Feeding Groups, Gathering-collector(53.9%) was dominant in April, while Filtering-collector (44.3%) increased in November. Intolerant order category (i.e. EPT species richness) in St.1, St.5 and St.6 increased in November compared to April due to the increase of Trichoptera. St.2, St.3 and St.4, which were located near the fish farm, were low EPT as a whole, but Benthic macroinvertebrate index (BMI) was good state in November than April due to decrease of Chironomidae spp.. The environmental factors in the survey site showed similar tendency except for St.1 between both seasons, and electrical conductivity, salinity, and water width showed seasonal differences. Cluster analysis and Nonmetric multidimensional scaling (NMDS) based on benthic macroinvertebrate community data were divided into two groups according to season. Electrical conductivity, salinity and substrate composition were the most influential factors determining the distribution patterns of macroinvertebrate communities.