• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.4
• /
• pp.45-54
• /
• 2004

In this paper, a view point tracking system has been realized for outdoor augmented reality including broad area monitoring. Since the surroundings of the moving view point are changing, it is necessary to track the position and observation moment of the view point system for consistency between real and virtual images. For this reason, the GPS(Global Positioning System) is applied to the realized system for tracking the information on position and direction of the moving system. In addition, an optical position tracking system that is able to track view point in a limited area is used, because the local tracking system has to trace the image variation, seen to the observer in a moving vehicle, at a particular position and time. It was found that the realized outdoor augmented reality system, which combined the virtual information tracked in real time with the real image, can be very practical in various application area.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1219-1227
• /
• 2013

A new type of wearable robot is developed for a disabled person with disabled limbs, that is, a person who cannot intentionally move his/her legs and arms. This robot can enable the disabled person to grip an object using eye movements. A gaze tracking algorithm is employed to detect pupil movements by which the person observes the object to be gripped. By using this gaze tracking 2D information, the object is identified and the distance to the object is measured using a Kinect device installed on the robot shoulder. By using several coordinate transformations and a matching scheme, the final 3D information about the object from the base frame can be clearly identified, and the final position data is transmitted to the DSP-controlled robot controller, which enables the target object to be gripped successfully.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1121-1126
• /
• 2017

Various studies such as INS(: Inertial Navigation System) are conducting to estimate the position of UAV, because the GPS information of UAV is at risk like the GPS jamming. The position estimation using DoA and RTT are used to apply many radar systems, and that process can be applied in datalink of UAV. The general monopulse feed in UAV datalink is Multi-horn, because of the wide BW(: Band Width) and frequency range. And it needs wide SNR range of tracking because of the limited transmit power of airborne unit. The estimation error of position increase at low SNR, and the DoA is valid in only 3dB beam width but high SNR causes false of mainlobe detection because of large sidelobe. In this paper, We propose the method to achieve higher accuracy of DoA estimation on low SNR and review some idea that able to detect mainlobe.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1823-1830
• /
• 2003

This paper presents a multiple face detector based on a robust pupil detection technique. The pupil detector uses active illumination that exploits the retro­reflectivity property of eyes to facilitate detection. The detection range of this method is appropriate for interactive desktop and kiosk applications. Once the location of the pupil candidates are computed, the candidates are filtered and grouped into pairs that correspond to faces using heuristic rules. To demonstrate the robustness of the face detection technique, a dual mode face tracker was developed, which is initialized with the most salient detected face. Recursive estimators are used to guarantee the stability of the process and combine the measurements from the multi­face detector and a feature correlation tracker. The estimated position of the face is used to control a pan­tilt servo mechanism in real­time, that moves the camera to keep the tracked face always centered in the image.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1463-1471
• /
• 2012

In this study, a 3-axis camera system design is proposed for application to an existing 2-axis surveillance robot. A camera-image-based target-tracking algorithm for this robot has also been proposed. The algorithm has been validated using a virtual simulation. In the algorithm, the heading direction vector of the camera system in the mobile surveillance robot is obtained by the position error between the center of the view finder and the center of the object in the camera image. By using the heading direction vector of the camera system, the desired pan and tilt angles for target-tracking and the desired roll angle for the stabilization of the camera image are obtained through inverse kinematics. The algorithm has been validated using a virtual simulation model based on MATLAB and ADAMS by checking the corresponding movement of the robot to the target motion and the virtual image error of the view finder.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.118-131
• /
• 2012

The existing electronic tagging system traces the location of a sex offender through communicating with GPS satellites and mobile phone base stations in order to prevent repeated crimes. However, the GPS satellite communication method does not work well in the interiors of downtown buildings or on the subways where it is difficult to receive satellite signals. In such cases, the location can be traced through communication with mobile phone base stations. But the distance between mobile phone base stations is several hundred meters, and as a result the margin of error for location tracing can be maximum of 2km in accuracy reduction. Take for example, if a kindergarten is located on the 2nd floor and a coffee shop and the sex offender are located on the 3rd floor in a 5-story building that is downtown, the existing electronic tagging system cannot trace the location of the sex offender as the GPS satellite communication does not work in the interior of the building and the exact floor that the sex offender is located on cannot be recognized through communication with mobile phone base stations. This occurrence is a big problem for the existing electronic tagging system, which is based on position recognition. Therefore, this study suggests a smart electronic tagging system that can monitor sex offenders by using a Ubiquitous Sensor Network in such extreme situations where position recognition is not possible.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.16-23
• /
• 2002

Recently, as the result of high technology of computer environments. various types of computer applications have been researched and developed. Ana, because of the growth of the mobile device such as PDA, HPC, and location tracking technology such as GPS, various services that is based on personal locations are provided. For these Mobile GIS, there is needed a development of client for Mobile GIS that is considered about the characteristics of mobile device. So, we design and implement client interface for Mobile GIS in this paper.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.631-634
• /
• 2003

이동체 기술은 자동차, 비행기, 선박 등과 같이 시간에 따라 공간상의 위치를 변경하는 시공간 객체에 대한 효율적인 데이터를 관리를 의미한다. 최근 정보통신 기술의 발전으로 이동차량의 위치를 측정하는 다양한 방법이 개발되었으며, 이를 기반으로 하는 개별적인 응용 시스템들이 개발되었다. 그러나 대부분의 기존의 관련 시스템은 특정한 단일의 측위 장치와 통신 방법만을 고려하여 구축되었기 때문에 이들간 데이터의 원활한 공유가 어려운 문제가 있다. 따라서 이 논문에서는 기존의 추적 기술을 토대로 생성된 다양한 형태의 위치 데이터를 통합하는 이동체 위치 데이터 인터페이스 모형을 제시한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.491-492
• /
• 2022

본 연구에서는 실내 공간 정보 획득을 위한 IMU/INS 항법장치에 관한 연구를 위한 선행연구를 수행 하였다. 최근의 GPS를 이용한 내비게이션의 경우 보통 5~10m의 위치 오차가 일어나지만 아파트나 대형시설과 같이 실내, 터널, 공장지대 및 산악 지대등 상당한 지역은 GPS의 사각지대 또는 오차 범위를 벗어난 지역으로 존재하고 있다. 따라서 GPS는 실내에서는 사용이 불가능 하므로 다른 방안이 제시되어야 한다. 현재 고속 연산을 위한 고성능 마이크로프로세서의 발전은 센서 분야에 적용되어 저 전력, 고 정밀, 소형의 IMU/INS, ARS/AHRS 센서가 개발되고 있다. 본 연구에서는 IMU(inertial measurement unit)와 INS(Inertial Navigation System)을 이용하여 IMU자체의 자이로 센서와 가속도 센서를 이용한 GPS의 위성신호가 감지되지 않는 지형에서도 속도의 적분값과 회전방향을 이용하여 위치인식이 가능하도록 정보를 계산하여 자기의 위치를 추적하는 방안을 연구하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.737-741
• /
• 2001

An illumination system by using sun light is optimally designed. The developing system consists of main controler for sun tracking, Cds sensor module, and light translation system based on optical fiber. A sun tracking algorithm is designed in such away that the illumination system stand with straight angle to the direction of sun within $\pm$2$^{\circ}$as permissible tolerance. To show the validity of the developed system, several experiments will be illustrated.