• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.86-92
• /
• 2001

Various array processing techniques to identify the noise source position or bearing have been developed. Typical array processing techniques which are based on time delay between received signals at two sensors, are classified as conventional beamforming, correlation function and NAH (Near-Field Acoustic Holography) techniques which have their own characteristics with respect to application field and signal processing method. In this study, correlation function technique which could be applied for broadband noise source detection, is adopted and the effective detection technique is proposed considering the effects of source bandwidth and measurement noise correlation of noise sources. The validity of the Proposed technique is evaluated using the 3-dimensional nonlinear any which does not give 3-dimensional Position or bearing ambiguity

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.1
• /
• pp.111-118
• /
• 2010

The proposed algorithm to be explained in this paper is the localization technique using directional antenna. Here, it is assumed that anchor node has the ability to transfer the azimuth of each sector using GPS modules, sector antenna, and the digital compass. In the conventional sensor network, the majority of localization algorithms were capable of estimating the position information of the sensor node by knowing at least 3 position values of anchor nodes. However, this paper has proposed localization algorithm that estimates the position of nodes to continuously move with sensor nodes and traveling nodes. The proposed localization mechanisms have been simulated in the Matlab. The simulation results show that our scheme performed better than other mechanisms (e.g. MCL, DV-distance).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.9
• /
• pp.782-791
• /
• 2013

This paper proposes the location estimation techniques of distributed targets with the multi-sensor data perceived through IR sensors of the military robots. In order to match up targets with measured azimuths, we apply the maximum likelihood (ML), depth-first, and breadth-first tree search algorithms, in which we use the measured azimuths and the number of pixels on IR screen for pruning branches and selecting candidates. After matching up targets with azimuths, we estimate the coordinate of each target by obtaining the intersection point of the azimuths with the least square error (LSE) algorithm. The experimental results show the probability of missing target, mean of the number of calculating nodes, and mean error of the estimated coordinates of the proposed algorithms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.337-340
• /
• 2011

In location finding system using spaced multi-sensor, Depending on the signal source's location and the location of the sensors Position estimation accuracy is determined. This phenomenon is called GDOP effect. and to minimize these effects, research is needed on how. In this paper, I will describe how to minimize GDOP effect, estimating GDOP using angle of arrivals of multi sensors, and removing sensor error factor.

• Journal of Navigation and Port Research
• /
• v.38 no.5
• /
• pp.457-462
• /
• 2014

Indoor-positioning systems are useful to various applications. Navigation system is one of the most popular applications, which needs the information of directions of nodes' movements. Specifically the applications should get the information in real-time to properly show the current moving position of a node. In this paper, simple vector-based algorithms are proposed to compute amount and direction of changes of azimuth of mobile nodes' heading directions using existing indoor positioning systems in indoor environments where azimuth sensors do not work properly. Previous algorithms calculate the azimuth changes by too many steps of topology-based formula. The algorithms proposed in this paper get the amount of changes of azimuth by simple formula based on vector, and determine the direction of changes by the sign of value of simple formula based on the previous movement of nodes. The algorithms are much simpler and less error-prone than previous ones, and then they can detect changes in many location-based applications as well. The performance of the algorithms is proved logically and mathematically.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.8-16
• /
• 1993

Auto-Pilot System uses heading angle information via the position sensor and the rudder device to control the ship direction. Most of the control logics are composed of the state estimation and control algorithms assuming that the measurement device and the actuator have no fault except the measurement noise. But such asumptions could bring the danger in real situation. For example, if the heading angle measuring device is out of order the control action based on those false position information could bring serious safety problem. In this study, the control system including improved method for processing the position information is applied to the Auto-Pilot System. To show the difference between general state estimator and F.D.F., BJDFs for the sensor and the actuator failure detection are designed and the performance are tested. And it is shown that bias error in sensor could be detected by state-augmented estimator. So the residual confined in the 2-dim in the presence of the sensor failure could be unidirectional in output space and bias sensor error is much easier to be detected.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.45-47
• /
• 2013

이동하는 물체와 가시선 통신링크를 유지하기 위해서는 추적안테나 시스템이 필수적이다. 방위각과 고각계산을 위해서는 이동체와 안테나시스템의 GPS값을 이용하는데, 이때 두 좌표계의 동일성을 유지하기 위해서 초기에 지자기센서나 beacon등을 이용하여 보정을 하게된다. 하지만 지형적으로 지자기교란이 생기기 쉬운 장소에서는 정확한 보정이 어렵다. 따라서 본 논문에서는 초기에 RF신호의 수신세기추적을 통해서 신호의 발생 위치를 검출하고 검출된 위치까지의 방위각 보정값을 계산하여 통신링크개설 후 수신된 GPS값에 보정값을 적용하는 추적안테나 시스템구현에 대해 기술한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2334-2340
• /
• 2010

Sun position computed by Michalsky shows maximum $1.5^{\circ}$, $0.88^{\circ}$ and 2 minutes differences in azimuth, altitude, and sunrise and sunset times respectively compared with Korean Almanac. The 2-axis solar tracking system, which consist control panel with ATmega128 CPU, BLDC motor-cylinder actuator and 2-axis link mechanism, was developed. Computed azimuth and altitude of sun for a current time, and latitude and longitude of tracker position built are controlled in real time by BLDC motor-cylinder actuators comparing with the position feed-backed by Hall sensor. The use of BLDC motor is free in maintenance. Implementation of a home-return function by Hall sensor is to minimize the cumulative error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.12
• /
• pp.1207-1215
• /
• 2013

This paper proposes the location estimation techniques of distributed targets with the multi-sensor data perceived through IR sensors of the military robots in consideration of obstacles. In order to match up targets with measured azimuths, to add to the depth-first search (DFS) algorithms in free-obstacle environment, we suggest the expanded DFS (EDS) algorithm including bypass path search, partial path search, middle level ending, and the supplementation of decision metric. After matching up targets with azimuths, we estimate the coordinate of each target by obtaining the intersection point of the azimuths with the least square error (LSE) algorithm. The experimental results show the error rate of estimated location, mean number of calculating nodes, and mean distance between real coordinates and estimated coordinates of the proposed algorithms.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.133-140
• /
• 2016

In active sonar field, a target detection and localization based on a distributed sensor network has been much studied for the underwater surveillance of the coast. Zhou et al. proposed a target localization method utilizing the positions of target-detected sensors in distributed sensor network which consists of detection-only sensors. In contrast with a conventional method, Zhou's method dose not require to estimate the propagation model parameters of detection signal. Also it needs the lower computational complexity, and to transmit less data between network nodes. However, it has large target localization error. So it has been modified for reducing localization error by Ryu. Modified Zhou's method has better estimation performance than Zhou's method, but still relatively large estimation error. In this paper, a target localization method based on modified Zhou's method is proposed for reducing the localization error. The proposed method utilizes the geometry of the positions of target-detected sensors and a line that represents the bearing of target, a line can be found by modified Zhou's method. This paper shows that the proposed method has better target position estimation performance than Zhou's and modified Zhou's method by computer simulations.